Megger MFT1735 Multifunction Tester 1003-319
- Bluetooth Connectivity
- Manufacturers Calibration Certificate
- Phase Rotation Service
- Earth Testing
- Downloadable
- Auto RCD
- 2 Wire Loop test
- Non Trip Loop Testing
- 2-wire Loop Test
- Auto RCD
- Backlit LCD Screen
- Bluetooth Connectivity
- Croc-clips and Probes Included
- Downloadable
- Earth Testing
- Memory Function
- Non-trip Loop Test
- Phase Rotation Testing
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
This instrument comes complete with your choice of free gift from the drop-down menu above. Choose from a calibration voucher for next
year or a 50m R2 wander lead. How about any one of the IET Guidance Notes, or a quality two-pole tester?
Whatever you choose you can be sure you're getting a fantastic deal at Instrument Sales & Service.
Megger MFT1735 Multifunction Tester
MFT1735 designed for testing low voltage electrical installations to BS 7671. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. Supplied with rechargeable batteries and earth spike set.
*Important Calibration Information:
This instrument comes complete with a manufacturers calibration certificate. Please be aware that these certificates are generic and may also be time lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.
Megger MFT1735 Comes Supplied With:
- Printed quick start guide Full user guide on CD
- Calibration certificate
- Switched probe SP5 (not with MFT1710)
- 1002-774 Neck strap - Megger embroidered 2001-509
- 3 Wire lead set with prods and clips
- 1001-991 SIA10 Socket interface adaptor UK to 3 x 4 mm (BS)
- 6220-810 SIA20 Socket interface adaptor UK to 3 x 4 mm (AU)
- 6220-828 Plug-in battery charger 2001-697.
- Rechargeable Batteries
- Earth spike set.
The MFT1700 series is a range of 3 instruments for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations.
The unique modern styling allows it to be operated while stood on the floor, a ladder-shelf or platform, hung around the neck or handheld. Dual TEST and LOCK buttons – one pair at each end – makes the testers easy to operate left or right handed.
Quick to pick up and use, the controls are colour coded to make range selection easy and fast. They also reduce the chance of using the wrong function or range. The large crystal clear backlit display uses the patented Megger digital/analogue arc, providing indication of fluctuating readings while the dual digital readout shows precise values of key measurements simultaneously with the test parameters, such as the output voltage on insulation testing as well as the resistance value in MΩ.
Visible and audible safety warnings are paramount when testing high-energy systems and the MFT1700 series includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen.If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.
The MFT1730 features internally rechargeable batteries and charger with a charge time of less than 4 hrs, so reducing the cost of ownership. Fully compliant with all requirements of IEC 60364 derived standards including VDE 0100 and BS 7671, the new MFT includes all the latest measurement technology in a lightweight
Key Features:
-
Two wire non trip loop testing for fast repeatable results
-
On-board data storage and Bluetooth® download
-
3-terminal earth test for electrode resistance measurement
-
3-phase RCD testing for industrial applications with no earth
-
Phase rotation indication for verification of rotating machinery
-
Large bright LCD display showing dual parameters - loop resistance and fault current, insulation resistance and test voltage
isswww and Megger
The extensive Megger product portfolio provides electrical test equipment for an exceptionally wide range of applications at any point of the electricity network. From small handheld low voltage equipment such as multifunction installation testers through to high voltage asset test equipment like insulation resistance testers, circuit breaker analysers, protection relay test systems to transformer condition measurement devices.
Megger designs and manufactures portable electrical test equipment in factories located in Germany, Sweden, the UK, and USA. Megger products help you install, improve efficiency, reduce cost and extend the life of you or your customers’ electrical assets.
Established in the late 1800s, the company has been designing and making test and measurement instruments that perform electrical measurements for preventative maintenance, troubleshooting and commissioning for decades. Megger products have supported customers all over the world to improve their facilities’ efficiency, reduce costs, extend the life of apparatus and through trending and analysis, anticipate equipment failure and future performance.
Being a brand synonymous with the industry and a cornerstone pioneer of many of today’s everyday items of test equipment, ISSWWW are proud to bring you Megger’s full range of equipment and services, now and into the future.
Key Features | Bluetooth Connectivity, Manufacturers Calibration Certificate, Phase Rotation Service, Earth Testing, Downloadable, Auto RCD, 2 Wire Loop test, Non Trip Loop Testing |
---|---|
Product Stock Status | Next Day Delivery (subject to availability) |
Manufacturer | Megger |
Short Description | SPECIFICATIONS Insulation test Output voltage -0% +20% at rated load or less Voltage display ±3% ±3 digits ±0.5% of rated voltage Short circuit current 1.5 mA nominal test current Test current on load 1 mA at min pass values of insulation Measurement accuracy 1000 Volts 10 kΩ ~ 999 MΩ ±3% ±2 digits 500 Volts 10 kΩ ~ 500 MΩ ±3% ±2 digits >500 MΩ ±10% ±4 digits 250 Volts 10 kΩ ~ 250 MΩ ±3% ±2 digits >250 MΩ ±10% ±4 digits 100 Volts 10 kΩ ~ 100 MΩ ±3% ±2 digits >100 MΩ ±10% ±4 digits Continuity / resistance 0.01 Ω ~ 99.9 Ω ±2% ±2 digits 100 Ω ~ 99.9 kΩ ±5% ±2 digits Open circuit voltage 5 V ±1 V Test current (0 Ω ~ 2 Ω) 205 mA ± 5 mA 15 mA ±5 mA (user selectable)
Loop test Live to earth supply 48 V ~ 280 V (45 Hz ~ 65 Hz) Live to live supply 48 V ~ 500 V (45 Hz ~ 65 Hz) L-N/L-L tests ±5% ±3 digits L-E tests* 0.1 Ω ~ 39.9 Ω ±5% ±5 digits ± noise margin 40.0 Ω ~ 999 Ω ±10% ±5 digits Display range 0.01 Ω ~ 999 Ω Live to earth PFC range 20 kA Live to live PSCC range 20 kA Rcd tests Supply up to 100 mA 48 V ~ 480 V (45 Hz ~ 65 Hz) Supply up to 1 A 48 V ~ 280 V RCD type Type AC, A, S Type B (pure dc) No trip test (1/2xI) –10% ~ –0% Trip test (1xI & 5xI) +0% ~ +10% Ramp test Touch voltage (0 ~ 253 V) +5% +15% ±0.5 V Trip time ±1% ±1 ms Trip current ±3% Step increments VAR (variable RCD selection) 10 mA ~ 50 mA 1 mA steps 50 mA ~ 500 mA 5 mA steps 500 mA ~ 1000 mA 10 mA steps Supply measurement Voltage 10 V ~ 600 V (15 ~ 400 Hz) True RMS ±3% ± 1 V ±2 digits Phase rotation indication L1–L2–L3 & L1–L3–L2 Frequency 15 Hz ~ 99 Hz ±0.5% ±1 digit 100 Hz ~ 400 Hz ±2.0% ±2 digits Frequency resolution 0.1 Hz Power MFT1735: 1.2 V NiMH (rechargeable 6 cells supplied) Mains charger for on-board re-charging (4 hours typical) 12 V car charger (cigar lighter lead - optional) Earth test Resolution 0.01 Ω Current 0.45 mA or 4.5 mA Noise rejection 20 V pk/pk (7 V rms). Max probe resistances Rp & Rc 100 kΩ @ 50 V 5 kΩ @ 25 V 2 & 3 pole method (0.01 Ω ~ 1.999 kΩ) ±2.0% ±3 digits ART method (1.00 Ω ~ 1.999 kΩ) ±5.0% ±3 digits** Stakeless method (1.00 Ω ~ 199 Ω) ±7.0% ±3 digits** Current (via optional clamp meter) ±5.0% ±3 digits. Range 0.1 mA to 200 A ac Resolution 0.1 mA mV Sensor input including temperature (third party module) ±1.0% ±2 digits Range 0.0 mV to ±199.9 mV dc Resolution 0.1 mV Internal memory (MFT1735) Capacity 1000 results Bluetooth communication Design standards Safety IEC 61010-1:2010 IEC 61010-30:2010 IEC 61010-031:2008 600 V Cat III / 300 V Cat IV (Max Phase to Phase 600 V) IEC 61557:2007 parts 1 to 10 EMC IEC61326 edition 2 location class B For test environments see service data. Environmental Temperature (operational) -10 °C ~ +55 °C Temperature (storage) -25 °C ~ +70 °C Operating humidity 90% R.H. at +40 °C max Max altitude 2000 m Weight 1 kg (with batteries, excluding case) Dimensions: 150 mm H x 85 mm W x 235 mm D Moisture/dust ingress protection IP54 Calibration temperature: +20 °C Temperature effects Temperature coefficient: <0,1% per °C |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA