Emlite RFID Electricity Meter Programming Card
- For use with supported RFID meters
- Landlord/Housing authority use
- Modern convenient meter management
- Other options available
- Program Compatible Smart Meters
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
RFID Electricity Meter Programming Card
Allows you to program certain RFID electricity meters
Compatibility:
- Emlite MP22 RFID Pre-Payment Card Electricity Meter
IMPORTANTThe pre-payment cards offered for sale on this page work ONLY with the Emlite MP22 RFID Pre-payment Meter detailed above and purchased originally from ISSWWW.CO.UK.Secure and unique coded electricity cards and calibration accessories, for pre-payment meters, are for sale to electricity meter owners only (eg Landlords and Letting Agents). Security checks will be carried out and proof of ownership may be requested for new customers.
|
Emlite MP22 cards – Electricity credits are paid for in advance on a ‘pay-as-you-go’ basis in exchange for secure, contactless RFID card tokens with values ranging from £1 to £50. Using radio frequency technology the cards can be programmed with unique serial codes to help protect customers’ revenues and enable cancellation if lost or stolen.
Instead of needing to place a magnetic-stripe card in a meter’s slot, RFID cards need only to be held close enough to the new generation of pre-payment meters to transfer credits.
About the Emlite MP22 RFID Pre-Payment Card Electricity Meter
Pre-payment the modern way with secure rechargeable payment cards
The MP22 RFID is a new Pre-payment card electricity meter that has been designed to replace the reconditioned Ampy 5028A and 5188 meters that are currently available. The MP22 is a newer version of the Emlite MP22 meter. This is the only MID certified card pre-payment meter available in today’s market. Using RFID technology (Radio-frequency identification), the credit from the pre-payment cards are transferred without the requirement to insert the card.This is a modern and ideal solution for Caravan Parks, Marinas and Rental Property.
The cards for this meter are re-usable and for small users (50 or less) we can recharge the cards at a small fee. For large users (50+) we can supply the Desktop Charger and software to allow you to recharge your own cards.
This meter is designed to be used for the control of the electricity supply in utility or secondary metered sites such as holiday and landlord accommodation. The meter is fully approved to the European metering standard, MID (Metering Instruments Directive). The meter is therefore tested and approved as accurate for billing purposes. The meter may also be used as a time controller.
| Key Features | For use with supported RFID meters, Landlord/Housing authority use, Modern convenient meter management, Other options available, Program Compatible Smart Meters |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Emlite |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA