Wiha WHA-44574 18Pc Electricians Tool Set and Pouch
- Suitable For Site Use
- VDE Rated
- 18 Piece Set
- Rated 10
- 000V AC
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Wiha WHA-44574 18Pc Electricians Tool Set and Pouch
Not having the suitable tool at hand when needed is an unnecessary waste of time, especially when you are on the go. The 18-part tool set for electricians in its handy belt pouch provides and keeps all tools required for electrical applications within reach for constant access. At the same time, users have both hands free for working.
The contents of the tool set consist of a wide range of essential and practical hand tools for electricians. These include the PicoFinish® electric fine screwdriver, the SoftFinish® electric slim Fix screwdrivers, the Wiha flashlight, and the TriCut installation pliers. What is more, the handy belt pouch offers room for additional utensils and can be quickly and easily attached to the belt.
Dimensions: 28 x 25 x 8 cm
Application: Basic tool equipment for demanding applications in the electric sector. For working on live parts up to 1,000 V AC.
44574 18 Piece Set Includes:
- 1x Installation pliers TriCut Professional electric 170 mm, 7" (38552)
- 1x Needle nose pliers Professional electric with cutting edge straight shape 200 mm, 8" (26727)
- 1x Professional electric diagonal cutters with DynamicJoint® 140 mm, 5 1/2" (43326)
- 1x Electrician's Longlife® folding ruler, 2 m metric, 10 segments 15 mm (42068)
- 1x Flashlight with LED, laser and UV light in blister pack, including 3 AAA batteries 100 - 310 lm (41286)
- 1x PicoFinish® electric fine screwdriver Slotted 1.5 mm x 50 mm (42374)
- 1x PicoFinish® electric fine screwdriver Slotted 2.5 mm x 65 mm (42376)
- 1x PicoFinish® electric fine screwdriver Phillips PH00 x 50 mm (42379)
- 1x PicoFinish® electric fine screwdriver Phillips PH0 x 65 mm (42378)
- 1x Screwdriver SoftFinish® electric slimFix Slotted 3.5 mm x 100 mm (35446)
- 1x Screwdriver SoftFinish® electric slimFix Slotted 4.0 mm x 100 mm (35390)
- 1x Screwdriver SoftFinish® electric slimFix Slotted 5.5 mm x 125 mm (35391)
- 1x Screwdriver SoftFinish® electric slimFix Pozidriv PZ1 x 80 mm (35395)
- 1x Screwdriver SoftFinish® electric slimFix PlusMinus/Pozidriv SL/PZ2 x 100 mm (36330)
- 1x Screwdriver SoftFinish® electric slimFix TORX® T10 x 100 mm (36536)
- 1x Voltage tester SoftFinish® single-pole, 110-250 volts Slotted transparent, with push-on clip 3.0 mm (34745)
- 1x measure tape 5 m
- 1x Tool Belt Pouch
About Wiha
What makes your work easier? Tools that increase your efficiency, reduce costs and preserve your health. This is why Wiha develop, design and manufacture products that meet the highest functionality, durability and ergonomic demands. Founded over 75 years ago as a small family-owned business for standard parts and screws, Wiha have grown to become a global company with factories all over Europe, Asia and the United States and are still owner-operated by the Hahn family. Wiha offer the professional a wide range of high-quality premium tools, characterized by their use of the latest manufacturing technologies, application-oriented innovations, ergonomic superiority, top quality, absolute reliability and long service life. In short, tools that make your work noticeably easier - tools that work for you.
| Key Features | Suitable For Site Use, VDE Rated, 18 Piece Set, Rated 10,000V AC |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Wiha |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA