TPI DC710C1 Flue Gas Analyser Kit
- Bluetooth Connectivity
- Holdall Included
- iOS/Android Dual Compatibility
- High Quality Graphical User Interface
- Durable and Rugged Design
- Measure CO and Temperature Differential
- Calculate CO2 / CO Air Free / Excess Air / Combustion Efficiency
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
TPI DC710C1 Flue Gas Analyser Kit
|
DELIVERY SCOPE Flue gas analysers are ordered back to back from many suppliers. This is due to the degradation that can occur with certain sensor heads that are held on shelves for too long and affects all distributors. We want you to receive the best product with the maximum life efficiency possible, with this in mind please allow for a slightly longer than usual delivery, generally around 4-5 days. |
Now with USB-C (PD) type charging.
The TPI DC710 Flue Gas Analyser is a smart analyser that has advanced flue gas analysis features plus the ability to communicate wirelessly to the user’s smartphone.
TPI Europe are pleased to announce that all DC710 units now come with an industry-leading 12-year warranty, this warranty also covers all DC710 units previously sold in the UK. All units – as per current legislation will need to be calibrated each year on the anniversary of original set up.
It has a CO measurement range from 0 to 10,000ppm and a temperature measurement range from -50˚C to 1000˚C. It can measure oxygen levels from 0 to 25% and calculates values such as CO2, air-free CO, excess air, and combustion efficiency.
One of the stand-out features of the TPI DC710 is its wireless Bluetooth connectivity which allows it to communicate with the user’s smartphone via the TPI app. As the analyser has no screen of its own, readings are instead displayed directly on the smartphone’s screen. This means that the user can view and control processes from a safe distance without needing long hoses as the analyser can still be hooked up right next to the combustion installation. The app also allows the creation of on-site reports and saves results to the smartphone’s memory.
The TPI DC710 has durable, sealed housing which means it can withstand the challenges of day-to-day use. It also has magnets and a hook on the back so it can be fixed in situ whilst the user controls proceedings remotely via the app.
DC710C1 Kit Comes Supplied With:
- DC710 Bluetooth-enabled Flue Gas Analyser
- USB charger
- A770 Gas Probe
- Soft Carry Case
Key Features:
- Operate remotely via Bluetooth using your Smartphone or tablet and the free TPI app. No need for long probe hoses - you can be at the control center with your smartphone, while the DC710 does the work at the stack.
- The free TPI app provides on-site reports which can instantly be emailed and stored without the need for paper or printers.
- 24-Hour real-time clock for accurate documentation.
- Powerful magnetic and/or hook mounting.
- Durable, rugged and sealed housing.
- Use for BS7967 remotely via Bluetooth using your Apple or Android Smartphone or tablet. H2 ready! EN50379 compliant
- The free TPI View app provides on-site reports which can be stored in Job Management and/or emailed without the need for paper or printers
- Each report created is Colour Coded “In/Out of Spec” with GPS Location and Time Date Stamp
Flue Gas Analysis:
- Measure CO, and Temperature Differential
- Calculate CO2, CO Air Free, Excess Air, and Combustion Efficiency
Ranges:
Gases
- Oxygen (O2): 0~25%; +/-0.3% accuracy
- Carbon Monoxide (CO): 0~10,000ppm; +/- 5ppm or 5% of reading whichever is greater accuracy
Temperature
- -50°C to 1000°C (-58°F to 1832°F); +/- 0.3% of reading +1°C (+/-0.3% of reading +2°F)
Also Available:
TPI Smart App
Use the TPI app to display real-time readings in numeric and graph format. Save readings to a CSV file. The app allows the customer’s information to be stored and a report sent via email!
Allows gas engineers using their smartphone to interact with TPI’s DC710 FGA, SP341 Thermocouple Thermometer, and SP620 and 608BTManometers. Job Management allows you to create multiple JOBS and attach multiple REPORTS to each Job! Give each report a different reference/name; save to an existing JOB or create a NEW one!
TPI DC710 Kit Comparison
| DC710 | DC710C1 Kit | DC710C2 Kit | DC710CPA1 Kit | |
| DC710 FLue Gas Analyser | X | X | X | X |
| USB Charger | X | X | X | X |
| Soft Carry Case | X | X | X | |
| A770 Gas Probe | X | X | X | |
| SP620 Manometer | X | X | ||
| GK11M Temperature Probe | X | |||
| A763 Pump Protection Filter | X | |||
| CPAK3 CPA1 Probe Kit | X | |||
| CK21M Temperature Clamps | X |
TPI View (FREE download):
Smart App
Use the TPI app to display real-time readings in numeric and graph format. Save readings to a CSV file. The app allows the customer’s information to be stored and a report sent via email!
Allows gas engineers using their smartphone to interact with TPI’s DC710 FGA, SP341 Thermocouple Thermometer, and SP620 and 608BTManometers. Job Management allows you to create multiple JOBS and attach multiple REPORTS to each Job! Give each report a different reference/name; save to an existing JOB or create a NEW one!
About TPI Europe
Since 1997, TPI has been striving to offer the latest technology at the most affordable price to technicians, contractors, engineers and others seeking value-based test and measurement instruments. Our mission is to become the leading independent manufacturer and supplier of low cost high-performance industrial instrumentation.
Headquartered in the heart of the “Silicon Forest” in Beaverton, Oregon, TPI combines innovation, performance, customer service and high value in products which include: Vibration, Combustion, Pressure (manometers), Temperature, Combustible gas, Digital Multimeters, Clamp Meters, IAQ, speciality test and measurement instruments, and a wide range of accessories.
| Key Features | Bluetooth Connectivity, Holdall Included, iOS/Android Dual Compatibility, High Quality Graphical User Interface, Durable and Rugged Design, Measure CO and Temperature Differential, Calculate CO2 / CO Air Free / Excess Air / Combustion Efficiency | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||
| Manufacturer | TPI Test Products International | ||||||||||||||||||||||
| Short Description | TPI DC710 Flue Gas Analyser
|
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA