TPI 9080 Ex Intrinsically Safe Smart Vibration Meter
- Manufacturer Certificate Included
- IP67 Rated
- 2 Hz to 1kHz (ISO)
- Displays in Hz
- RPM or CPM
- Windows® Compatible Software Included
- g: 2Hz - 10kHz
- Frequency Resolution 100/800 Lines
- Dynamic Range 96dB
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
TPI 9080-Ex Intrinsically Safe Smart Vibration Meter
Analyses, interprets and TRENDS readings..
The TPI 9880-Ex is a simple, easy to use, low cost vibration meter that records, alalyses and displays vibration signals at the push of a button.
VibTrend standard software gives you greater ease of use and flexibility, Windows® 10 compatible.
Store , analyse and report on all your vibration parameters in one place; up to 10 assets with 10 readings per asset standard; unlimited assets with 10 readings per asset with optional A9084 VibTrend Pro software.
All information is just a click away. Colour coded alarms highlight problems and trend lines show problems before they happen.
Overall machine and bearing conditions:
Vibration values are displayed with clour coded alarm levels for ISO values and Bearing Damage (BDU).
Bluetooth Support:
Industry approved ear defenders with built-in Bluetooth headphones are also available to let you listen to the bearing noise, or even listen to your phone.
TPI 9080-Ex Comes Supplied With:
- A9093 Intrinsically safe accelerometer and magnet
- A9081 Docking station with USB cable
- A9083 VibTrend software
- Carrying case
Key Features:
- Intrinsically Safe IEC Ex/ATEX Ex-ib IIC T4 Gb (-20°C ≼ Ta ≼ +40°C)
- Collects data
- Trend data using VibTrend software
- Intrinsically Safe cable mounted accelerometer with magnet
- Built-in Bluetooth communication capabillity
- USB Docking staion to download to a PC
- ISO built-in alarms
- Easily identify bearing problems with BDU reading
- Easily identify problems with built-in band filters
1x (unbalance)
2x (Misalignment)
3x (looseness) - 800 line FFT (spectrum)
- Listen to bearing noise with optional Bluetooth headphones
- Ruggedized IP67 case
- 3-year limited warranty
Typical Applications:
- Commercial and Industrial HVAC
- Food Processing
- Manufacturing
- Mining
- Packaging
- Petrochemical
- Pulp & Paper
- Power Plants
- Utilities
- Automotive
Spares and Accessories (Not Supplied):
- A9084 VibTrend Pro software
- A9072 4-inch Stinger
- A9080 Bluetooth headset
*The 9080-Ex can be used with non-intrinsically safe accessories in non-hazardous areas. Only the 9080-Ex with A9095 boot installed
and the A9093 intrinsically safe accelerometer should be taken into hazardous areas.
About Intrinsically Safe Products
Products that appear on this website that are listed as or relate to a classification of intrinsic safety are titled and described according to our best understanding and/or interpretation of the complex and sometimes changing criteria governing such classification as set out by the Health and Safety Executive.
Please note that due to the volatile nature of the intended use of products in this category, neither UK Test Instruments or Instrument Sales and Service can be held responsible for any incident that arises from the purchase or use of any product described within this web site. For more information please visit the health and Safety Executive website with specific regard to Hazardous Area Classification and Control of Ignition Sources.
TPI Europe
Since 1997, TPI has been striving to offer the latest technology at the most affordable price to technicians, contractors, engineers and others seeking value based test and measurement instruments. Our mission is to become the leading independent manufacturer and supplier of low cost high performance industrial instrumentation.
Headquartered in the heart of the “Silicon Forest” in Beaverton, Oregon, TPI combines innovation, performance, customer service and high-value in products which include: Vibration, Combustion, Pressure (manometers), Temperature, Combustible gas, Digital Multimeters, Clamp Meters, IAQ, specialty test and measurement instruments, and a wide range of accessories.
| Key Features | Manufacturer Certificate Included, IP67 Rated, 2 Hz to 1kHz (ISO), Displays in Hz, RPM or CPM, Windows® Compatible Software Included, g: 2Hz - 10kHz, Frequency Resolution 100/800 Lines, Dynamic Range 96dB | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||
| Manufacturer | TPI Test Products International | ||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA