Testo 300 Longlife Flue Gas Analyser Kit with Printer 0564 3004 84
- Large 5” HD display with smart touch operation
- Connect up to 4 smart probes via USB Dongle
- Email & Bluetooth customer reports
- Domestic & commercial kits available
- Free download testo EasyHeat PC software
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Testo 300 Longlife Flue Gas Analyser Kit with Printer 0564 3004 84
*Important Calibration Information:
Please note that due to additional stringent procedures required to calibrate natural gas equipment, calibration on this instrument may unfortunately incur a longer turnaround. Whilst we are acutely aware that this is not always convenient, we kindly request that you allow approximately 5-7 additional working days for purchases including calibration. We will endeavor to always improve upon this but feel it is important to let our customers know before the purchase is made.
testo 300 Comes Supplied With:
- testo 300LL Longlife flue gas analyzer with O2 and CO(H2 compensated) sensor up to 30,000 ppm via auto dilution + NO sensor (0633 3004 83)
- USB mains unit, including cable (0554 1105)
- Modular style flue gas probe, 180 mm; Ø 8 mm; Tmax. 500°C; 1.5 m hose; including cone for fixing (0600)
- testo Bluetooth® connector (0554 3004)
- Bluetooth / IRDA printer (0554 0621)
- Hard carry case (0516 3300)
Key Features:
-
Large 5” HD display with smart touch operation
-
Connect up to 4 smart probes via a USB Dongle
-
Email/Bluetooth customer reports
-
Domestic & commercial kits are available
Overview:
Carry out installation and maintenance work on commercial heating systems using this flue gas analyzer with Longlife sensors. The Testo 300 Longlife flue gas analyzer is supplied with O2 and CO H2-compensated sensors up to 30,000 ppm. Also fitted with an NO sensor for calculated NOx measurement. modular flue gas probe, testo Bluetooth® Connector, testo Bluetooth printer, carry case.
testo 300 Longlife flue gas analyser with Smart-Touch operation – Features
- O2, H2 - compensated CO sensor up to 30,000 ppm thanks to integrated fresh air dilution and NO sensor
- Longer sensor service life thanks to automatic sensor protection
- Integrated draught and gas zeroing without removing the probe – the flue gas probe can remain in the flue during zeroing
- For intensive daily use: high-quality Longlife sensors for O2 and CO with a service life of up to 6 years. That means at least one sensor replacement is saved in the course of a normal working life
- Designed and tested to comply with EN 50379, Parts 1-3
- Manufacturer's warranty of up to 5 years on O2 and CO sensor with product registration – without a maintenance contract
- Versatile probes and fast probe changes: take advantage of quick-change probes and the multi-functional handle for attaching a variety of probe shafts (each available to order separately). You can, for instance, use longer probe shafts for flue gas pipes with larger diameters or flexible probes for difficult-to-access measuring points
- Optionally available probes and accessories for further measuring tasks, such as gas flow pressure measurement, gas pipe testing, differential temperature measurement, and ambient CO measurement
Smart, intuitive, efficient: easy operation in day-to-day work
- Smart-touch display for intuitive operation of the flue gas analyzer: the display responds without delay – just as easy as on your smartphone
- Get the measurement result faster: clearly structured measurement menus for all relevant measurements
- Create documentation (including measuring value, measuring location, and customer data) easily on site
- Save PDF measurement reports directly in the instrument and always have them available
- Signature function: your customer can sign measurement reports directly on the instrument
- E-mail measurement reports directly to the office or to customers via WLAN (hotspot)
- Large 5-inch HD display – enables you to see all the system's parameters immediately
- Testo interface function for direct data transfer of measuring values to industry/customer-specific software*
- Ready to use straight away: in standby mode, the Testo 300 is ready to measure at the touch of a button. Use it straight away with the next customer – because you no longer need to wait for the end of the zeroing phase
- Integrated Bluetooth<sup>®</sup> interface: immediate printout of the measuring values on site with the appropriate printer
*Note: the manufacturer has to integrate an interface into the industry software to use the function
- 10-hour rechargeable battery life: an average measurement period of 2 hours means the flue gas analyser is capable of being used for one week
- Integrated, extra-strong magnets for easy fixing during the measuring process
Modular flue gas probe, 180 mm, Ø 8 mm, Tmax 500 °C
On the TÜV-tested modular flue gas probe with a 180 mm long probe shaft, the flue gas path and temperature channel can be conveniently connected to the measuring instrument via a practical bayonet lock. The probe shaft is also easy to replace, thanks to the quick-change click system on the handle. The thermocouple NiCr-Ni, which is integrated in the probe shaft, enables temperature measurement up to 500 °C. In addition, a dirt filter protects the instrument and its sensors from contamination.
-
Easy probe shaft replacement via a quick-change click system
-
Flue gas path and temperature channel can be connected to the instrument via a bayonet lock
-
Integrated dirt filter protects instruments and sensors
-
Integrated thermocouple probe for temperature measurements up to 500 °C
TÜV-tested modular flue gas probe with 180 mm long probe shaft including dirt filter and thermocouple. The quick-change click system enables quick, flexible replacement of the probe shaft.
Bluetooth®/IRDA printer
-
Bluetooth® & IrDA interface in one printer
-
Printout of graphs and measurement data
-
Coloured LEDs show the status of the printer
-
The data transfer takes just 2 seconds
Using the printer you can print out graphs and measurement data from compatible Testo measuring instruments or Testo Apps.
testo Bluetooth® Connector
The testo Bluetooth Connector enables efficient, wireless measurement of up to four additional parameters in parallel with your flue gas measurement. Automatic connection to your Testo 300 enables you to measure the gas flow and static pressure in parallel using the Testo 510i Smart Probe and the flow and return temperature using two Testo 115i Smart Probes. Combustion air temperature measurement is also very easy to carry out in parallel using the Testo 915i Smart Probe. All parallel measurements are automatically displayed on your Testo 300 and can be started and stopped simultaneously. Via the connection to the Smart App, the measurement, documentation, and data transfer of all parallel measurements can be carried out effortlessly using the second screen function, the Quick Report function, and the e-mail transmission. All measurements stored on your Testo 300 can also be conveniently integrated into your in-house software using the QR code (via the previously programmed interface) or simply printed out using the print option on your Testo 300. Advantages of the Bluetooth Connector: Wireless range up to 100m with no obstructions. Compatible with testo 510i, testo 115i, testo 915i.
Applications
- high-quality Longlife sensors with a service life of up to 6 years, smart-touch operation, clearly structured measurement menus, creation of documentation on site, e-mailing of reports, large HD display, robust housing
- gas flow pressure measurement*, gas pipe test*, differential temperature measurement (flow and return temperature on heating systems)*, ambient CO measurement*, flue draught measurement on heating systems*, integrated 4 Pa measurement for combustion equipment
testo 300 Series Selector:
testo EasyHeat v2.12 SP7 - PC software
-
PC software for reading out the data from corresponding Testo measuring instruments
-
Graphic and tabular presentation of the measurement parameters
-
Administrating customer and location data
Free download: PC software for graphic and tabular presentation as well as for evaluation and archiving of measurement data. Customer and measurement location data can be conveniently managed with the testo EasyHeat.
isswww and testo
Testo Limited was established in 1983 as the UK subsidiary of Testo and is based in Alton, Hampshire where they supply a full range of test equipment across the UK and Ireland. They are a key supplier to the Facility Management and Industrial Maintenance Sectors where they can provide the full range of instruments critical to the effective and efficient maintenance of premises, and allow compliance with all key regulations.
Testo has many innovative products in their portfolio with a modern attractive design. Aesthetic appeal isn't usually attributed to test equipment, but Testo breaks the mould. Coupled with their pedigree as a worldwide manufacturer and supplier with a proven track record, we confidently supply and recommend Testo products without reservation.
| Key Features | Large 5” HD display with smart touch operation, Connect up to 4 smart probes via USB Dongle, Email & Bluetooth customer reports, Domestic & commercial kits available, Free download testo EasyHeat PC software | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Testo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA