Testo 300 LL Longlife Flue Gas Analyser 0564 3004 82

Name: Testo 300 LL Longlife Flue Gas Analyser 0564 3004 82
Brand: Testo
SKU: TES0564300482
Price: 1732.98 GBP
Availability: InStock

£1,732.98 £1,444.15

SKU

TES0564300482

Carry out installation and maintenance work on heating systems several times a day using the flue gas analyser with Longlife sensors.

Price Banner

Important Calibration Information

All gas analyser calibrations incur additional
lead time of 5-7 working days.
Please see *Important Calibration Information.

Flue CO: 0 to 4000 ppm
Measures Ambient CO
O₂: 0 to 21 vol.%
Pressure: -100 mbar to +200 mbar

Information on the calibration of newly purchased equipment and what it means to you.

Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Personalised traceable calibration certificate from isswww

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.

Skip to the end of the images gallery

Testo 300 LL Longlife Flue Gas Analyser 0564 3004 82

Skip to the beginning of the images gallery

Description

Testo 300 LL Longlife Flue Gas Analyser

DELIVERY SCOPE

Flue gas analysers are ordered back to back from many suppliers. This is due to the degradation that can occur with certain sensor heads that are held on shelves for too long and affects all distributors. We want you to receive the best product with the maximum life efficiency possible, with this in mind please allow for a slightly longer than usual delivery, generally around 4-5 days.

The Testo 300 LL Flue Gas Analyser is a highly intelligent piece of kit designed for testing and commissioning commercial boilers and other combustion systems.

The Testo 300 LL can measure O2 (0 to 21%), CO (0 to 4000ppm), draught (-9.99mbar to 40mbar), pressure (-100mbar to 200mbar), and temperature (-40˚C to 1200˚C). The CO measurement function is particularly advanced as it has an H2-compensated sensor which, with dilution, gives a measurement range of 0 to 30,000ppm. Additionally, the analyser can measure ambient carbon monoxide with an internal sensor (0 to 2000ppm) or external probe (0 to 500ppm). In terms of value calculation, the analyser offers figures for CO2 (0 to CO2 max.), efficiency (Eta; 0 to 120%), flue gas loss (0 to 99.9%) and combustion ratio.

The advanced interface of the Testo 300 LL makes it extremely easy to use before, during, and after inspections. Live readings are shown in list form on the analyser’s colour touchscreen or in graphical format over time with the settings fully customisable for the user. Operation is conducted via intuitive menus that allow fast, efficient testing.

Also working to improve the Testo 300’s practicality, as well as its efficiency, is the integrated draught and gas zeroing. This allows the user to zero the instrument without removing the flue gas probe from the flue pipe. Moreover, when placed in Standby mode, the Testo 300 Long Life Flue Gas Analyser is ready to use at the touch of a button. This eliminates the need to wait until the end of the zeroing phase before commencing measurements, again increasing work efficiency.

The Testo 300 LL Comes Supplied With:

Testo 300 LL Flue Gas Analyser
Modular flue gas probe
10 x spare flue probe filters
Testo EasyHeat PC software
Carry case
Testo wireless printer (Printer kit ONLY)
6 x printer rolls (Printer kit ONLY)

Key Features:

Available in two standard kits with or without a printer
Equipped with O₂ and CO sensors
Sensors are TϋV-tested in accordance with first German Federal Immission Control Ordinance (BImSchV) and EN 50379 Parts 1-3
Sensors have a service life of approximately six years
Automatic sensor protection
5-year warranty (from Testo) on the O₂ and CO sensors when the analyser is registered
O₂: 0 to 21 vol. %
CO (without H₂ compensation): 0 to 4000 ppm
CO (with H₂ compensation): 0 to 8000 ppm
CO (with H₂ and fresh air dilution): 0 to 30000 ppm
Suitable for inspecting heating systems
Multi-functional handle facilitates the attachment of quick-change probe shafts
Extra-strong magnets for ensuring the tester is kept in place throughout the measurement process
Integrated draught and gas zeroing
Ready-to-use at the touch of a button when placed in Standby mode
Intuitive, smart-touch display
Same response time as a smartphone
5-inch HD display

Applications:

Ideal for measurements involving heating systems:

High-quality Longlife sensors with a service life of up to 6 years, smart-touch operation, clearly structured measurement menus, creation of documentation on site, e-mailing of reports, large HD display, robust housing

Further areas of application:

Gas flow pressure measurement*, gas pipe test*, differential temperature measurement (flow and return temperature on heating systems)*, ambient CO measurement*, flue draught measurement on heating systems*, integrated 4 Pa measurement for combustion equipment

testo 300 LL - Longlife standard kit

isswww and testo

Testo Limited was established in 1983 as the UK subsidiary of testo and is based in Alton, Hampshire where they supply a full range of test equipment across the UK and Ireland. They are a key supplier to the Facility Management and Industrial Maintenance Sectors where they are able to provide the full range of instruments which are critical to the effective and efficient maintenance of premises, and allow compliance with all key regulations.

Testo have many innovative products to their portfolio with a modern attractive design. Aesthetic appeal isn't something usually attributed to test equipment but Testo really breaks the mould. Coupled with their pedigree as a worldwide manufacturer and supplier with a proven track record, we are confident in supplying and recommending Testo products without reservation.

Features & Specification

More Information

Key Features

Flue CO: 0 to 4000 ppm, Measures Ambient CO, O₂: 0 to 21 vol.%, Pressure: -100 mbar to +200 mbar

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Testo

Short Description

Measurement Parameter	Measuring Range	Accuracy (±1 Digit)	Resolution
O₂ measurement	0 to 21 vol.%	±0.2 vol.%	0.1 vol.%
CO measurement (without H₂ compensation)	0 to 4,000 ppm	±20 ppm (0 to 400 ppm)	1 ppm
		±5% of m.v. (401 to 2,000 ppm)
		±10% of m.v. (2001 to 4,000 ppm)
CO measurement (with H₂ compensation)	0 to 8,000 ppm	±10 ppm or ± 10% of m.v. (0 to 200 ppm)	1 ppm
		±20 ppm or ± 5% of m.v. (201 to 2,000 ppm)
		±10% of m.v. (2,001 to 8,000 ppm)
CO measurement (with H₂ compensation and dilution)	0 to 30,000 ppm	±100 ppm or ± 10% of m.v	1 ppm
Combustion ratio (calculated)	-	-	0.0001
NO measurement optional upgrade	0 to 3,000 ppm	±5 ppm (0 to 100 ppm)	1 ppm
		±5% of m.v. (101 to 2,000 ppm)
		±10% of m.v. (2,001 to 3,000 ppm)
Efficiency testing (Eta)	0 to 120%	-	0.1%
Flue gas loss	0 to 99.9%	-	0.1%
CO₂ determination (digital calculation from O₂)	Display range 0 to CO₂ max.	±0.2 vol.%	0.1 vol.%
Draught measurement	-9.99 to +40 mbar	±0.005 mbar (0 to 0.1 mbar)	0.001 mbar (0 to 0.1 mbar)
		±0.02 mbar (0.1 to +3.00 mbar)	0.01 mbar (remaining meas. range
		±1.5% of m.v. (+3.01 to +40 mbar)
Pressure measurement	-100 to 200 mbar	±0.5 mbar (0 to +50.0 mbar)	0.01 mbar
		±1% of m.v. (+50.1 to +100.0 mbar)
		±1.5% of m.v. (+100.1 to +200 mbar)
Temperature (instrument)	-40 to +1,200°C	±0.5°C (0.0 to +100.0°C)	0.1°C (-40 to +999.9°C)
		±0.5% of m.v. (remaining meas. range)	1°C (remaining meas. range)
Ambient CO measurement (internal/flue gas probe)	0 to 2,000 ppm	±10 ppm (0 to 100 ppm)	1 ppm
		±10% of m.v. (101 to 2,000 ppm)
Ambient CO measurement (external with CO probe)	0 to 500 ppm	±3 ppm (0 to 29 ppm)	1 ppm
		±10% of m.v. (30 to 500 ppm)
General Technical Data
Certification	The testo 300 is TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3
Storage temperature	-20 to +50°C
Operating temperature	-5 to +45°C
Charging temperature	0 to +45°C
Humidity application range	15 to 90% RH, not condensing
Power supply	Rechargeable battery, USB mains unit
Rechargeable battery life	10 hrs
Protection class	IP 40
Memory	1 mio. measurement values
Display	5.0" touch display, HD 1280x720 pixels, IPS (160 k)
Weight	Approx. 800 g
Dimensions	L: 244 mm (including probe connection) H: 59 mm W: 98 mm
Testo 300 Longlife warranty	Instrument/probe/gas sensors	O₂, CO sensor	48 months
		NO sensor	24 months
		Thermocouple and rechargeable battery	12 months

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA