Socket & See DCF200 Dead Circuit Finder
- Adjustable Volume Control
- Determine Length and Depth
- Easy to Use
- Essential Electricians Accessory
- Works with Live or Dead Cabling
- Audible Indication
- Traces Wires In A Range Of Locations
- Supplied With Case
- Leads And Accessories
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Socket & See DCF200 Dead Circuit Finder
Find that dead circuit fast with the Socket & See DCF200 Dead Circuit Finder!
The Socket and See DCF200 allows the fast identification of dead circuits, as well as other applications such as fuse finding, wire tracing and picking, along with wire break detection.
Both the transmitter and receiver work off battery power as opposed to mains power. An indication is given when battery power is low as well as having an auto off feature.
The receiver is simply operated by a single button and automatically adjusts to the received signal strength. It also has dual audible / visual indication and self check facility.
The transmitter works with or without an earth as well protecting against accidental main connection up to 440V and warning of short circuit or potentially hazardous voltages.
DCF200 Comes Supplied With:
- Socket & See DCF200 Transmitter
- DCF200 Receiver
- Instruction Manual
- Carry Case
Receiver Features:
- Simple operation by single button
- Automatically adjusts to received signal strength no fiddly volume wheels or range buttons
- Dual audible/visual indication
- Auto power-off
- Low battery indication
- Self Check facility
Transmitter Features:
- Simple operation by single button
- Battery powered - does not use mains supply
- Auto power-off
- Low battery indication
- Drives long cables
- Works with or without an earth
- Warning of short circuit or potentially hazardous voltages
- Protected against accidental mains connection up to 440V
Applications:
- Fuse Finding - find which fuse is feeding the dead circuit
- Wire Tracing - trace wires through floors and walls
- Wire Picking - pick the correct wire from a bundle or loom
- Wire break detection - locate a break in a wire
- Find a circuit by identifying the individual conductor
- Trace cables up to 50cm away
- Internal battery, 9V cell operation for both transmitter and receiver
- 4 - Way product - Simple to use
About Socket & See
From DIY to DNO, Socket & See have been revolutionising the world of electrical test & measurement through bespoke, UK designed and intuitive problem solving test equipment.
The Socket and See range was designed with our customers in mind; from newly qualified tradesmen to fully qualified Electricians, Plumbers or HVAC Engineers, there is a Socket and See product to suit your testing need! Socket and See products are now widely recognised by some of the World’s leading companies and are available from many specialist test equipment suppliers. Keeping a close eye on each process enables Socket and See to offer all products with a 2 year warranty!
| Key Features | Adjustable Volume Control, Determine Length and Depth, Easy to Use, Essential Electricians Accessory, Works with Live or Dead Cabling, Audible Indication, Traces Wires In A Range Of Locations, Supplied With Case, Leads And Accessories |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Socket and See |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA