Megger LRCD220 Loop and RCD Tester

Name: Megger LRCD220 Loop and RCD Tester
Brand: Megger
SKU: MEGLRCD220
Price: 780 GBP
Availability: InStock

£780.00

SKU

MEGLRCD220

The Megger LRCD200 Series combines Non-tripping loop tests and RCD testing all in one unit.

Manufacturer Certificate Included
Auto RCD
2 Wire Loop test
Backlit LCD Display
Non Trip Loop Testing

2-wire Loop Test
Auto RCD
Backlit LCD Screen
Non-trip Loop Test

Information on the calibration of newly purchased equipment and what it means to you.

Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Personalised traceable calibration certificate from isswww

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

Megger LRCD220 Non-trip Loop Tester

Key Features:

• RCD testing from 10 mA to 1000 mA
• Extremely easy and safe to use
• Built-in protective front cover
• Tough Rubber armoured case
• Weatherproof
• 3 year warranty

The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised circuits.

All Megger LRCD200 series instruments are supplied with a calibration certificate.

Two instruments are available:

Megger LRCD210
This instrument provides three phase safe non-trip loop testing and 1/2I, I, and 5I RCD testing for standard, selective and DC RCDs. Suitable for domestic installers testing to UK Part P requirements.

Megger LRCD220
As the LRCD210 with the addition of 2 wire fast testing, plus phase to phase and phase to earth measurement.

Both instruments will not trip RCDs rated at 30 mA or
greater during loop testing, even electronic RCDs.

Features & Specification

More Information

Key Features

Manufacturer Certificate Included, Auto RCD, 2 Wire Loop test, Backlit LCD Display, Non Trip Loop Testing

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Megger

Short Description

	Megger LRCD220
	Voltage Measurements	0 V - 500 V
	Voltage Accuracy	±2% ±2 digits
	Frequency Measurement Range	25Hz to 450Hz
	Frequency Accuracy	25.0Hz to 199.9Hz ±0.1Hz 200Hz to 450Hz ±1Hz
	Phase Rotation Indicator (LRCD220 only)	Three wire identification of phase rotation.
	Frequency	45Hz to 65Hz
	Loop Testing	Loop ranges (to EN 61557-3)
	No-Trip Loop Test (3 Wire, Line To Earth)	LRCD200/210 200V - 280 V 45Hz to 65Hz LRCD220 100V - 280 V 45Hz to 65Hz
	Nominal Test Current	15 mA
	Loop Accuracy	0.01 ½ - 9.99 ½ (±5% ±0.03 ½) 10.0 ½ - 99.9 ½ (±5% ±0.5 ½) 100 ½ - 999 ½ (±5% ±5 ½) 1.00 k½ - 2.00 k½ (±5% ±30 ½)
	Hi Current Line/Earth Loop Test (2 Wire, LRCD220 Only)	Yes
	Supply	100 V - 480 V
	Nominal Test Current	15 mA to 2.4 A
	Loop Accuracy	0.01½ - 9.99 ½ (±5% ±0.03 ½) 10.0½ - 99.9 ½ (±5% ±0.5 ½) 100½ - 999 ½ (±5% ±5 ½) 1.0 k½ - 2.00 k½ (±5% ±30 ½)
	Line/Line (LRCD220 Only) Supply	100 V - 480 V 45Hz to 65Hz
	Prospective Fault Current (PSCC)	Prospective fault current = Nominal supply voltage/Loop resistance Accuracy is derived from loop test 1 A - 199 A 1 A resolution 0.20 kA - 1.99 kA 10 A resolution 2.0 kA - 19.9 kA 100 A resolution
	RCD Testing	RCD Test Ranges (to EN61557-6) LRCD200/210 10mA, 30mA,100mA, 300mA, 500mA LRCD220 10mA, 30mA,100mA, 300mA, 500mA, 1000mA
	Supply Voltage	LRCD200/210 = 200 V - 280 V 45Hz to 65Hz LRCD220 = 100 V - 280 V 45Hz to 65Hz

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA