Martindale VIPDLOK150-S Proving Unit and Safe Isolation Kit
- Compatible with most circuit breakers
- Carry case included
- Good practice for Health and Safety
- Case Included
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
VIPDLOK150-S Lock-off Kit with VI-15000 & PD690 voltage indicator & proving unit
The complete solution for safe isolation, the Martindale VIPDLOK150 Lock Out Kit contains the VI-15000 voltage indicator, PD690SRD proving device, along with a complete lock out kit, supplied with soft carry cases.
Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving unit before and after use.
Kit contains the following items:
- 1 x PD690SRD proving device
- 1 x VI-15000 voltage indicator
- 1 x Padlock with unique key
- 1 x Steel safety hasp, with space for up to 6 padlocks
- 1 x Green mini MCB lock
- 1 x Yellow mini MCB lock
- 1 x Blue medium MCB lock
- 1 x Large red MCB lock
- 1 x Yellow fuse lockout breaker
- 1 x Red fuse lockout breaker
- 5 x Danger tags which can be overwritten
- 1 x Black marker for writing on Danger tags
- 1 x TC55 soft carry case
The complete solution for safe isolation, the Martindale VIPDLOK150-S Lock Out Kit contains the VI-15000 voltage indicator, matching PD690S proving device, along with a complete lock out kit, supplied in soft carry cases. The kit makes it easy to comply with Health & Safety recommendations for safe working practices when maintaining or installing electrical plant and equipment. The new VI-15000 has a 1000V CAT IV safety rating and LED indication for AC/DC voltages from 50V to 690V, ensuring compliance with health and safety recommendations for safe working in all BS EN61010 installation categories.
Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving unit before and after use.
The VI-15000 voltage indicator and matching PD690S proving unit are supplied in the TC69 combination carry cases to ensure that the proving device is always at hand and provide the simplest solution for implementing safe isolation practices on-site in accordance the Electricity at Work Regulations. For convenience and to save time, the proving unit can be used without having to remove it from the case.
The comprehensive lock out kit is compatible with all distribution boards. Spare and replacement individual lock off pieces are also available to order separately.
The kit comprises of 7 different locking devices for simple fitting to MCBs, RCBOs and fuse holders. There is a plastic body padlock with a 6mm hardened steel shackle for securing the locking devices and a steel safety hasp which allows multiple padlocks to be used. Multi-lock hasps ensure a circuit cannot be re-energised until each operator has finished work and removed their own padlock.
The kit is completed with 5 warning tags, a marker pen and a durable case with space for storing additional accessories.
Comparison:
| VIPD150-S | VIPLOK150-S | VIPDLOKPRO150-S | |
|---|---|---|---|
| VI-15000 Voltage Indicator | ✔ | ✔ | ✔ |
| PD690S Proving Unit | ✔ | ✔ | ✔ |
| TC69 Combination Carry Case | ✔ | ✔ | ✔ |
| LOKKIT1 12 Piece Kit | ✔ | ||
| LOKKITPRO 17 Piece Kit | ✔ |
isswww and Martindale Electric
Founded in 1928 and also owns Edgcumbe Instruments Metrohm® products, as well as the John
Drummond Engineers range of test lamps. They are a British owned company, based in Watford, just 5 minutes from junction 5 of the M1. Their product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring for 17th Edition and Part P testing, safely prove dead, and measure everything from light and sound levels to microwave leakage and power consumption. We are proud to be able to offer Martindale's products and services and have done so for many years.
| Key Features | Compatible with most circuit breakers, Carry case included, Good practice for Health and Safety |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Martindale |
| Short Description | The 16 piece lock off kit contains the following items: • 1 x Padlock with unique key • 1 x Steel safety hasp, with space for up to 6 padlocks • 1 x Green mini MCB lock • 1 x Yellow mini MCB lock • 1 x Blue medium MCB lock • 1 x Large red MCB lock • 1 x Red fuse holder lock • 1 x Red spring MCB lock • 1 x Yellow spring MCB lock • 5 x Danger tags which can be overwritten • 1 x Black marker for writing on Danger tags • 1 x TC55 soft carry case |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA