KPS Instruments INSUTEST10000 10 kV Insulation Resistance Tester
- 10kV Tester
- Test Voltage 1000-10000V
- Insulation Resistance >20TΩ / 10000V
- PI (Polarization Index)
- DAR (Dielectric Absorption Ratio)
- EN 61010-1 CAT IV 600V EN 61010-2-030 EN 61326-1
- Complete with leads
- data transmission cable and calibration
- Fully downloadable 200 test-result capacity
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
KPS Instruments INSUTEST10000 10 kV Insulation Resistance Tester
For diagnostic testing and maintenance of high voltage electrical equipment, cables, generators, circuit breakers, motors etc
*Important Calibration Information:
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.
INSTEST1000 Comes Supplied With:
• Instruction manual
• Test leads
• Data transmission cable CA-232
• Alligator clips
• Batteries
• Calibration certificate
Key Features:
MAIN FEATURES
• 2 Lines × 16 Characters LCD
• Microprocessor-controlled
• Tests insulation resistance up to 20 TΩ
• 4 Insulation test voltages: 1000V, 2500V, 5000V, 10000V
• AC / DC Voltmeter (30~600V)
• Auto-ranging on all insulation ranges
• Auto-discharge function
• Well isolated from contact
• Well protected from surges
• 2 built-in optical LEDs for data transfer
• Visual and audio warning of external voltage presence (≥30Vac or ≥30Vdc)
• Auto-hold function to freeze reading
• Overload protection
• Adjustable testing duration: 1~30 minutes
• Internal memory for data storage
• Displays testing duration for insulation measurement
• Auto-off function
• 200 measurement results can be saved in memory and recalled on display
• Optical USB to RS-232 data transmisión
Advanced Features:
Data Communication Function with measurement storage and PC interface
• Data can be downloaded and saved to a PC.
• Data can also be transferred to a PC for realtime display.
• 200 measurement results can be saved in the memory and recalled on the display.
About KPS Instruments
At KPS we design, manufacture and sell products and solutions for the electrical market always with the highest levels of quality and performance.
KPS Testing and measuring equipment
We conceive and engineer electrical measuring instruments to comply with the most demandingEuropean standards. Our high-performance digital clamp meters, multimeters and testers are developed to cover the requirements of any electrical installation.
KPS. Energy saving
Our solutions are designed, manufactured and adapted to the environment where they will be installed, always considering the needs of the professionals working on them.
| Key Features | 10kV Tester, Test Voltage 1000-10000V, Insulation Resistance >20TΩ / 10000V, PI (Polarization Index), DAR (Dielectric Absorption Ratio), EN 61010-1 CAT IV 600V EN 61010-2-030 EN 61326-1 , Complete with leads, data transmission cable and calibration, Fully downloadable 200 test-result capacity |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | KPS Instruments |
| Short Description | KPS Instruments INSUTEST10000 Technical SpecificationsTest Voltage 1000V, 2500V, 5000V, 10000V |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA