Knipex Modular X18 Plumbing Tool Backpack 00 21 50 S
- Legendary Knipex Quality
- Highly adaptable Molle configuration
- Pulmbing essentials kit
- 17-piece tool kit
- Weight loaded only 6.55 Kg
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Knipex Modular X18 Plumbing Tool Backpack 00 21 50 S
Practical and comfortable due to fully hinged front and back, removable tool board and padding for your back.
Optimal flexibility due to innovative FIDLOCK® connectors and MOLLE webbing.
Kit Comes Supplied With:
- 1 x 00 11 01 KNIPEX TwinKey® for all standard cabinets and shut-off systems,
- 1 x 86 03 300 KNIPEX Pliers Wrench pliers and a wrench in a single tool,
- 1 x 87 01 180 KNIPEX Cobra® High-Tech Water Pump Pliers,
- 1 x 87 01 300 KNIPEX Cobra® High-Tech Water Pump Pliers,
- 1 x 98 24 01 SL KNIPEX Screwdriver (Slim) for cross-recessed screws Phillips® (PH1),
- 1 x 98 24 02 SL KNIPEX Screwdriver (Slim) for cross-recessed screws Phillips® (PH2),
- 1 x 98 20 35 SL KNIPEX Screwdriver (Slim) for slotted screws (3,5 mm),
- 1 x 98 20 55 SL KNIPEX Screwdriver (Slim) for slotted screws (5,5 mm),
- 1 x 74 06 180 KNIPEX High Leverage Diagonal Cutter,
- 1 x 0022086 Wera set of hex key wrenches (1,5 - 10 mm),
- 1 x 101-0300 Picard Locksmith's hammer (300 g),
- 1 x 2281 Stabila spirit level type 70 (30 cm),
- 1 x 01114 Stabila Wooden folding rule type 1607, white, 2 m,
- 1 x 90 31 02 SB KNIPEX TubiX® Pipe cutter,
- 1 x 90 10 165 BK KNIPEX CutiX® Universal knife,
- 1 x 90 22 10 BK KNIPEX BiX® Cutter for plastic pipes and sealing sleeves,
- 1 x 00 21 50 LE KNIPEX Modular X18 empty,
Fit for any challenge:
With two separate inner compartments for tools, measuring instruments, notebooks or tablets. Durable fabric made of sustainable recycled synthetic fibers, splash-proof and easy to clean.
Waterproof moulded bottom made of impact-resistant plastic for a secure upright position when opened and closed, 6 cm high. One MOLLE strap on the inside and four MOLLE straps on the outside for attaching any adapters, carabiners and accessories.
FIDLOCK® connections are fastened or unfastened in no time at all. A total of 21 retaining loops and 37 pockets, some with zips.
Luggage strap for fixing to telescopic handles of tool cases. 50 x 35 x 25 cm (H x W x D), empty weight 2.9 kg, tested load capacity up to 15 kg. Equipped with 12 KNIPEX tools, a total of 17 brand tools, partly VDE-tested according to DIN EN 60900. Max. payload: 15 kg. Volume: 18 litres.
Exterior (interior) width mm: 340mm- Dimension exterior (interior) height mm: 210mm- Dimension exterior (interior) depth mm: 530mm
Key Features:
- Fits you and your tools: practical and comfortable due to fully hinged front and back, removable tool board and padding for your back
- As individual as you are: Optimal flexibility due to innovative FIDLOCK® connectors and MOLLE webbing
- Fit for any challenge: with two separate inner compartments for tools, measuring instruments, notebook or tablet
- Durable fabric made of sustainable recycled synthetic fibers, splash-proof and easy to clean
- Waterproof molded bottom made of impact-resistant plastic for a secure upright position when opened and closed, 6 cm high
- One MOLLE strap on the inside and four MOLLE straps on the outside for attaching any adapters, carabiners and accessories
- FIDLOCK® connections are fastened or unfastened in no time at all
- A total of 21 retaining loops and 37 pockets, some with zips
- Luggage strap for fixing to telescopic handles of tool cases
- 53 x 34 x 21 cm (H x W x D), empty weight 2.9 kg, tested load capacity up to 15 kg
- Equipped with 12 KNIPEX tools, a total of 17 brand tools, partly VDE-tested according to DIN EN 60900
- Max. payload: 15 kg
- Volume: 18 litres
- Fully hinged front & back with removable padding
-
-
Knipex are an expert German manufacturer for a range of pliers and cutters. Made to the highest of standards with the professional user in mind.
| Key Features | Legendary Knipex Quality, Highly adaptable Molle configuration, Pulmbing essentials kit, 17-piece tool kit, Weight loaded only 6.55 Kg |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Knipex |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA