The Kewtech KEW1052

For high accuracy, high performance and reliable measurements. This new generation multimeter boasts a host of features and innovations that make it real powerhouse product in it's market class, such as a 1600 result internal memory, temperature test and Min/Max measurement calculation, data export to a printer or PC (requires Kewtech's part 8241). Results data from the KEW1052 can be exported for graphical view to a PC via Kewtech's DMM application for PC (requires Kewtech part 8241). From a safety in use point, this meter also complies with IEC 61010-1, CAT.$ 600V, CAT.# 1000V.

The Kewtech KEW1052 comes supplied with:

• Batteries
• Test leads
• Fuses 440mA/1000V &10A/1000V
• Instruction manual
• Calibration Certificate

Functions

• Top Accuracy 
  0.09% basic DC accuracy for KEW 1052.

• Dual Display
  6,000 counts, Bar graph with 31 segments. Orange back light display.

• TRMS Measurement
  Ensures accurate readings, avoiding errors (of up to 50%) which can occur when non-sinusoidal waveforms, created by common non linear loads such
  PCs, Inverters, switch-mode power supplies, etc, are measured.

Advanced Functions

• Low-pass Filter
  AC measurement can be limited to low frequency, helping for instance voltage measurements in the presence of variable speed motor drivers or inverters.
  The Low-pass filter can be switched ON/OFF.

• Selection of the reading mode
  Selectable TRMS or MEAN measurement. The presence of distortion in an AC signal can be confirmed, ifthe measured TRMS and MEAN values are different.

• Sensor mode
  The DMM measures the output voltage of an external sensor (e.g. clamp sensor, light sensor, temperature sensor,etc.) in the secondary display, while the primary display can be set to show the unit of the measured parameter (e.g. A, mA, Lux, ˚C) according to the conversion ratio chosen.

• Auto Hold function
  The measured value is held on the display just by removing the test leads from the circuit under test. Users can remain safely concentrated on the measuring
  point without the need to press the Hold key.

• Relative and Percentage calculation
  Can calculate and display Relative values or Percentage (%) against the reference measurement values.

•  Minimum / Maximum / Average function
  Can record the MIN/MAX/AVG values during the measurement process displaying the data and the elapsed time.

• Duty cycle ratio measurement
  The duty cycle ratio is displayed in percentage (%).

Safe and Durable Design

• Complies with IEC 61010-1, CAT.$ 600V, CAT.# 1000V

• Safety shutters to prevent incorrect test leads’ insertion in current terminals.
  Terminal shutters are opening or closing being linked with the
  rotation of the function switch.

• Very wide operating temperature range
  From –10deg C to +55deg C.

• High specs UL standard fuses for extra safety
  Fuses rated at 1000V with 30kA of breaking capacity.

• Over molding case
  Made by “Elastomer”, a superior shock sustainable material.
  Perfectly fits to hand

  .

Reliable Support for Data Management

• Large internal memory to store test data
  1,600 data in Logging mode, 100 data manually saved.
  Logging interval can set from 1 sec. to 30 min.

• Test data can be transferred to a PC or directly to a Printer*
  Real-time data can be transferred and shown on a PC.
  Real-time transferring permits the saving of a considerable amount of data on a PC.
  Stored data of internal memory can be monitored by PC.

• Data management with the software DMM Application*
  List of measured data can be converted into Graph.
  Data can be transferred to Excel** and saved as CSV file.
  *Optional accessories are required, refer to last page.
  **Excel is a registered trademark of Microsoft in the USA.

Optional Accessories

• 7234 Crocodile Clip Test Lead
• 8115 AC/DC Clamp Sensor
• 8241 USB Communication Set (USB Adaptor + USB Cab;e + DMM Software)
  8249 DMM Printer Full Set (Printer Communication Set, Printer and EU AC Power Adapter)
• 8243 Printer Communication Set (Printer Adapter + RS232 Cable)
• 8246 Printer + 1 Roll of Thermal Paper
• 8248 AC Adapter for Printer (EU)
• 8247 Thermal Paper for Printer (10 Rolls)
• 8405 Temperature Probe (Surface)
• 8406 Temperature Probe (Liquid/Semi-Solid)
• 8408 Temperature Probe (Air, Gas)
• 9154 Carrying Case

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA