Kewtech ISO3 Safety Isolation Kit
- Case Included
- KT1795 Two pole tester
- AC voltage up to 1000V
- DC Voltage up to 1500V
- Includes lock off device & proving unit
- Clear LED & LCD indication
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Kewtech ISO3 Safety Isolation Kit
The ultimate solution for safe isolation procedures, with a UK-specific KT1795 two-pole tester. Permanently GS38 with no covers to lose and a 50-690V proving unit.
OVERVIEW:
The importance of safe isolation can never be understated. Essential and enshrined in law to look after the safety of all personnel, it is vital to have the best procedures and equipment for the job.
The KEWTECH range has something for all working practices and situations including a specialised TB118 kit for central heating engineers.
All our kits include a dedicated two-pole voltage tester, high output proving unit in accordance with the correct procedure, and a locking-off device with warning labels. All Kewtech kits also come in a carry case that allows access to the proving unit without the need to remove it.
For more information on correctly safe isolating please download the procedure outlined by the Electrical Safety Roundtable in the downloads at the bottom of this page.
KEY BENEFITS:
- Required for correct safe isolation procedure
- KT1795 - Voltage indication even without batteries
- Ghost voltage clearance function
- Permanent UK Specific GS38 Slender probe tips NO NEED to swap ends
- Fits into recessed terminals such as RCBOs without unscrewing any caps
- IP64
- Designed to the new international safety standards IEC 61243-3 & IEC 61010-1
- KEWLOK - No need for a separate lock and no keys are required
Durable carry bag with a shoulder strap and transparent window for the proving unit
KEY FEATURES:
- KT1795 - Clear LEDs indicate the voltage level
- Measures 6V - 1000V AC
- Measures 6V - 1500V DC
- Push buttons to increase the testing load to clear ghost voltages
- 1V LCD resolution indication
- Clear audible tone
- Bright torch light - gives ample illumination
- Phase Rotation - Bright green LEDs show left or right rotation
- Single pole voltage detection on both probes
- Continuity test
- Diode test
- Self-diagnostic test
- Polarity indication
- Auto power on/off
- Data hold
- KEWLOK - One size fits most MCBs and toggle-type main switches
- User-selectable integral combination padlock
- Comes with two warning labels that can be secured to the shackle and give the user information
- KEWPROVE3 - High output will drive even the highest current voltage detector
- Instant ramp-up and then step-down will prove several voltage levels
isswww and Kewtech
One of our longest-standing manufacturer partnerships and a brand that sells well day in and day out for solid dependability and innovation at the price point.
Kewtech manufacture innovative, accurate and reliable test equipment that enables UK electrical contractors to undertake their testing obligations quickly and efficiently.
A product with the “Kewtech” brand has been specifically designed for the UK market by a team with many years of industry experience. We pride ourselves on developing and manufacturing products that have real benefits to the industry.
Kewtech has consistently introduced industry firsts, like our Lightmate testing adaptors, the Pat Adaptor, the MFT with PAT testing plus download, and our award-winning RB1 Replacement Lamp. Our 18th Edition multifunction testers lead the way in ease of use, loop accuracy, and repeatability of reading.
| Key Features | Case Included, KT1795 Two pole tester, AC voltage up to 1000V, DC Voltage up to 1500V, Includes lock off device & proving unit, Clear LED & LCD indication | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Kewtech | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA