Kewtech Kew-mate 2001A Digital Multimeter With AC/DC Clamp Sensor
NEW
This pocket sized Kewtech 2001A multimeter measures up to 100A and 600V AC/DC current and voltage.- 3400 counts with bargraph display
- Pocket size
- Measures AC / DC currents to 100A
- Unique Open Jaw technology
- Measures up to 600V AC and DC
- Measures Resistance up to 60MΩ
- Continuity test buzzer
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Kewtech 2001A Digital Multimeter With AC/DC Clamp Sensor
A unique multi-functional device featuring thin jaws, perfect to clamp wires even in tight spaces where a normal clamp meter is too big or wires are too short.
Has a maximum resolution of 0.1A AC/DC.
Key Features:
- Capable of measuring AC and DC currents up to 100A with OPEN CLAMP SENSOR.
- 3400 counts with bar graph display.
- Pocket size and heavy-duty design.
- Increased cable strength with new rubber protection
- Test probe can be fixed to the holster.
- Can measure AC/DC current and voltage.
- With test lead cap to protect from short circuit accidents.
- The open jaws are thin, and perfect for clamping wires even in tight spaces.
Applications:
- Everyday multimeters for technicians, the Kewmates are designed for electrical and electronic testing in field service and all applications where extra features, such as AC/DC current measurements up to 60/100/120A, simplify working.
- Ideal for electrical and electronic troubleshooting in residential, commercial and industrial installations.
- Thanks to the open clamp sensor, Kewmates are perfect for reading currents in tight spaces where a normal clamp meter would be unsafe or too big to use such as sub-distribution boards, consumer units, final circuits, connection boxes, control panels or simply where the wires are too short.
- Optimized for measuring the output of a solar panel in photovoltaic installations.
- DC current measurements permit electrical testing and servicing of cars, electric forklifts, small electric cars or trolleys for cleaning, DC motor adjustable speed controllers, golf cars and trolleys, small electric cars and chairlifts for the disabled, work platforms, UPS's, electric scooters and bikes, etc.
Application Examples:
Product Comparison Chart:
The Kew-mate comes in three variations, choose the correct model for you from the table below.
| 2000A | 2001A | 2012RA | ||||||||||||||||||
| DC V | 340.0mV/3.400/34.00/340.0/600V (Input impedance: 10MΩ) ±1.5%rdg±4dgt |
600.0mV/6.000/60.00/600.0V (Input impedance: approx. 10MΩ) ±1.0%rdg±3dgt |
||||||||||||||||||
| AC V | 3.400/34.00/340.0/600V (Input impedance: 10MΩ) ±1.5%rdg±5dg (50 - 400Hz) |
6.000/60.00/600.0V (Input impedance: approx. 10MΩ) ±1.5%rdg±5dgt (45 - 400Hz) |
||||||||||||||||||
| DC A | 60.0A ±2.0%rdg±5dgt |
100.0A ±2.0%rdg±5dgt |
60.00/120.0A ±2.0%rdg±8dgt (60A) ±2.0%rdg±5dgt (120A) |
|||||||||||||||||
| AC A | 60.0A ±2.0%rdg±5dg (50/60Hz) |
100.0A ±2.0%rdg±5dg (50/60Hz) |
60.00/120.0A ±2.0%rdg±5dgt (45 - 65Hz) |
|||||||||||||||||
| Ω | 340.0Ω/3.400/34.00/340.0kΩ/3.400/34.00MΩ ±1.0%rdg±3dg (340Ω/3.4/34/340kΩ) ±5.0%rdg±5dg (3.4MΩ) ±15.0%rdg±5dg (34MΩ) |
600.0Ω/6.000/60.00/600.0kΩ/6.000/60.00MΩ ±1.0%rdg±5dgt (600Ω/6/60/600kΩ) ±2.0%rdg±5dgt (6MΩ) ±3.0%rdg±5dgt (60MΩ) |
||||||||||||||||||
| Continuity buzzer | Buzzer sounds below 30±10Ω | Buzzer sounds below 35±25Ω | ||||||||||||||||||
| Diode test | — | — | 2.000V ±3.0%rdg±5dgt, Open-loop voltage: approx. 2.7V | |||||||||||||||||
| Capacitance | — | — | 400.0nF/4.000/40.00μF ±2.5%rdg±10dgt |
|||||||||||||||||
| Frequency | (AC A) (AC V) |
3.400/10.00kHz ±0.1%rdg±1dgt 3.400/34.00/300.0kHz ±0.1%rdg±1dgt |
(AC A) (AC V) |
99.99/400.0Hz ±0.2%rdg±2dgt (100Hz) ±0.1%rdg±1dgt (400Hz) 99.99/999.9Hz/9.999/99.99/300.0kHz ±0.2%rdg±2dgt (100Hz) ±0.1%rdg±1dgt (1000Hz/10/100/300kHz) |
||||||||||||||||
| Input sensitivity | Current: more than 15A Voltage: more than 30V |
Current: more than 25A Voltage: more than 30V |
Current: more than 6A Voltage: more than 6V [-10kHz]/more than 20V [10k - 300kHz]) |
|||||||||||||||||
| Conductor size | ø6 mm max. | ø10 mm max. | ø12 mm max. | |||||||||||||||||
| Applicable standards | IEC 61010-1 CATⅢ 300V, CATⅡ 600V Pollution degree 2, IEC 61010-2-032, IEC 61010-031, IEC 61326-1, EN 50581(RoHS) | |||||||||||||||||||
| Power source | R03(AAA)(1.5V) × 2 * Continuous measuring time: approx. 45hours (Auto power save: approx. 10 minutes) |
R03(AAA)(1.5V) × 2 * Continuous measuring time: DC V: approx. 150 hours, AC A: approx. 25 hours (Auto power save: approx. 15 minutes) |
||||||||||||||||||
| Dimensions | 128(L) × 87(W) × 24(D) mm | 128(L) × 92(W) × 27(D) mm | ||||||||||||||||||
| Weight | 210g approx. (including batteries) | 220g approx. (including batteries) | ||||||||||||||||||
| Accessories | R03(AAA) × 2, Instruction manual | |||||||||||||||||||
| Optional | 9107 (Carrying case [Soft]) | |||||||||||||||||||
isswww and Kewtech
One of our longest-standing manufacturer partnerships and a brand that sells well day in and day out for solid dependability and innovation at the price point.
Kewtech manufactures innovative, accurate, and reliable test equipment that enables UK electrical contractors to undertake their testing obligations quickly and efficiently.
A product with the “Kewtech” brand has been specifically designed for the UK market by a team with many years of industry experience. We pride ourselves on developing and manufacturing products that have real benefits to the industry.
Kewtech has consistently introduced industry firsts, like our Lightmate testing adaptors, the Pat Adaptor, the MFT with PAT testing plus download, and our award-winning RB1 Replacement Lamp. Our 18th Edition multifunction testers lead the way in ease of use, loop accuracy, and repeatability of reading.
| Key Features | 3400 counts with bargraph display, Pocket size, Measures AC / DC currents to 100A, Unique Open Jaw technology, Measures up to 600V AC and DC, Measures Resistance up to 60MΩ, Continuity test buzzer | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||
| Manufacturer | Kewtech | ||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA