KANE988 Industrial boiler analyser with KANE Link
- Tests boilers up to 5 MW
- Measures CO to 100
- 000ppm / 10%
- HC to 5000ppm & CO2 to 20%
- Option to measure NO NO2 SO2 & H2S
- Tests air conditioning & refrigeration system
- The most comprehensive KANE FGA available
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
KANE988 Industrial boiler analyser with KANE Link
Industrial boiler analyser with KANE LINK
|
DELIVERY SCOPE Flue gas analysers are ordered back to back from many suppliers. This is due to the degradation that can occur with certain sensor heads that are held on shelves for too long and affects all distributors. We want you to receive the best product with the maximum life efficiency possible, with this in mind please allow for a slightly longer than usual delivery, generally around 4-5 days. |
KANE988 Analyser Comes Supplied With:
-
PTFE Lined Combustion Probe
-
Battery Charger
-
Rucksack / Backpack
-
Protective Handset Pouch
Overview:
- Tests any boiler up to & over 5MW / 50 mbar draught with high suction pump
- Measures CO to 100,000ppm / 10%, HC to 5000ppm & CO2 to 20%
- Option to measure NO, NO2, SO2 & H2S
- Large graphic colour display & keypad
- Wirelessly connects optional KANE LINK devices to measure flow & return, air flow & air quality
- Tests air conditioning & refrigeration system superheat & subcool - wireless KANE LINK devices available soon
- MCERTS (pending) tests with optional KANE GCU Gas Chiller Unit
- Backed by KANE CARE 10 year warranty - We promise to never let you down or your money back
Applications:
-
Install, commission & service any heating & hot water system using any fossil, biomass & HVO fuel
-
Optional environmental sensors test to local regulations
-
Accurate NO2 & SO2 measurements with optional KANE-GCU gas conditioning unit
-
Safety checks - CO in rooms & around appliances
-
Combustion performance & efficiency tests
-
Flue draught & gas pressure / system tightness tests
-
Flow & return, air flow & air quality tests
-
Air conditioning & refrigeration superheat & subcool tests
-
Backed by KANE CARE - We promise to never let you down or your money back
Measures:
-
O2 to 21% ppm
-
CO to 10,000ppm H2compensated & 100,000ppm / 10%
-
CO2 to 21% with 40% over range
-
HC to 5,000ppm
-
Temperature - inlet / flue gas / differential / ambient / flow & return
-
High accuracy differential pressure meter +/- 160mbar
-
NO to 5,000ppm - option
-
NO2 to 1,000ppm - option
-
SO2 0-5,000ppm - option
-
H2S to 200ppm - option
Calculates:
-
CO/CO2 ratio
-
Combustion efficiency,
-
Excess air / Lambda
-
NOx - if NO fitted
-
Superheat & Subcool - with optional KANE LINK devices available soon
Fuel Types:
-
Natural Gas x2 & Town Gas
-
LPG, Biogas & Kinsale Gas
-
Butane, Propane & Gascor
-
Light oil & Heavy oil
-
Coke, Coal & Anthracite
-
Up to 5 user fuels
About KANE International
Since 1963, Kane International Ltd has been in Welwyn Garden City, Hertfordshire, and has a long history and broad experience designing and manufacturing portable test equipment.
Kane International is the UK’s foremost manufacturer and supplier of hand-held exhaust emissions testers and portable test equipment. Kane’s design, engineering and manufacturing skills have created a range of highly sought-after portable equipment meeting the highest standards of testing and conformity. Their customers range from Commercial and Domestic Heating Engineers, Automotive Technicians to Electrical Engineers.
| Key Features | Tests boilers up to 5 MW, Measures CO to 100,000ppm / 10%, HC to 5000ppm & CO2 to 20%, Option to measure NO NO2 SO2 & H2S, Tests air conditioning & refrigeration system, The most comprehensive KANE FGA available |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Kane International |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA