Kane 458s Flue Gas Analyser with KANE Link
- Test domestic gas oil and biomass
- Data hold log and print
- Measures CO to 10000ppm
- USB charger included
- KANE Link enabled
- Analyses Indoor Air QUality
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Kane 458s Flue Gas IAQ Analyser with Kane Link
DELIVERY SCOPE Flue gas analysers are ordered back to back from many suppliers. This is due to the degradation that can occur with certain sensor heads that are held on shelves for too long and affects all distributors. We want you to receive the best product with the maximum life efficiency possible, with this in mind please allow for a slightly longer than usual delivery, generally around 4-5 days. |
Standard Configuration:
- O2 0-21%
- CO 0-10,000ppm H2 compensated with Over range protection
- Differential pressure +/-80mBar
- Differential temperature
Overview:
- Test domestic gas, oil, biomass & commercial appliances up to 120KW
- Optional sensors include CO to 10,000ppm with H2 compensation, NO(x) & ambient CO2
- Test homes, commercial kitchens & workplaces for CO & CO2 (optional)
- Structured tests include tightness and CO & CO2 build-up
- Easy to use rotary dial & large display
- Hydrogen (H2 ) ready – up to 20% blend
- KANE LINK - our future-proof promise - Heat Pumps, 100% H2 & HVO appliances when required
Kane 458s Comes Supplied With:
- Analyser
- Probe
- Pressure connectors
- USB charger
- Quick reference guide & analyser calibration certificate
Key Features:
- Rotary dial & 6 line display
- Data hold, log & print with user details to optional printer
- Combustion - Pressure - Let-by & Tightness
- Temperature - CO build up - Commission test
KANE LINK Compatible:
To discover more about KANE LINK visit KANE directly here.
Applications:
- Install & service appliances up to 120KW
- additional sensors to suit applications
- Safety checks – Appliance sweep & room migration tests
- Flueless appliance tests
- Combustion performance & efficiency tests
- Flue Draught
- Tightness & let by tests
Fuel Types:
- Natural Gas
- LPG
- Wood Pellets
- Butane
- Light oil
- Propane
FREE GIFT available with this purchase:
Select either of the following quality KANE items to go with your purchase, just make your selection from the drop-down menu above.
The KANE-VCT Voltage & Continuity Testers with Phase Rotation test are the benchmark for voltage indicators. The three-in-one tester with a rugged, ergonomically formed housing for perfect handling offers Single Pole Detection, fully operational even when the batteries are discharged & fully conforms to BS EN 61243-3:2014. The KANE-PU690V proving unit is a 690V compact & lightweight voltage proving unit designed for compliance safety checking of voltage testers prior to testing on a live circuit is also high & low Z impedance compatible for proving voltage on multimeters Worth £190.80 |
|
KANE-EGD Detects combustible gas leaks from: 20ppm Hydrogen 50ppm Methane & Propane Features
Worth £178.80
|
|
KANE-WPCP2 Wireless Pipe Clamp Temperature Probes (x2) Features
Worth £226.80 |
isswww and KANE International
Since 1963, Kane International Ltd has been in Welwyn Garden City, Hertfordshire, and has a long history and broad experience designing and manufacturing portable test equipment.
Kane International is the UK’s foremost manufacturer and supplier of hand-held exhaust emissions testers and portable test equipment. Kane’s design, engineering, and manufacturing skills have created a range of highly sought-after portable equipment meeting the highest standards of testing and conformity. Their customers range from Commercial and Domestic Heating Engineers, Automotive Technicians to Electrical Engineers.
Key Features | Test domestic gas oil and biomass, Data hold log and print, Measures CO to 10000ppm, USB charger included , KANE Link enabled, Analyses Indoor Air QUality |
---|---|
Product Stock Status | Next Day Delivery (subject to availability) |
Manufacturer | Kane International |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA