Ideal 61-765 600A ACDC TRMS TightSight Clamp Meter
- Current AC/DC
- TRMS
- Data Hold
- Frequency Measurement
- Backlit LCD Screen
- Backlit LCD Screen
- Current AC/DC
- Data Hold
- Frequency Measurement
- TRMS
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Ideal 61-765 Clamp Meter
The Ideal Industries 61-765 digital clamp-meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, capacitance, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 660A (amperes). The clamp has two jaws that can close around an electrical conductor up to 36mm (1.42 inches) in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750V, (DC voltage to 1,000V, capacitance to 1,000μF (microfarads), frequency to 400Hz (hertz), and resistance to 10,000Ω (ohms). Frequency can also be measured with the clamp. The meter has a rotary switch to select the property to measure, and both a front and a bottom 9,999-count LCD with a backlight for visibility in low light, that turns off automatically after three minutes. In addition to numerical readings, the front display shows readings on a 41-segment bar graph. The bottom display shows AC and DC current readings when taking measurements in tight spaces.
The meter features a low-pass filter that reduces high-frequency interference to allow accurate measurements of complex wave shapes. The peak hold function records the highest reading of voltage or current, while the maximum/minimum function tracks the highest and lowest readings for a property for as long as the function is engaged. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on a single 9V battery, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.
Features
- 660 A True RMS clamps for a variety of industrial and commercial environments
- Unique TightSight® bottom display makes hard-to-reach measurements convenient
- Easy-to-read displays feature large numbers and green glowing backlight
- CAT IV rating for maximum safety
- Frequency, capacitance, peak, data hold, max/min
Common Features:
- TightSight® bottom display
- Tapered jaws with hook tip
- Measures AC Current
- True RMS
- AC/DC Voltage
- Selectable audible and visual voltage alerts on AC/DC voltage functions
- Frequency via clamp head or test leads
- Resistance
- Capacitance
- High Frequency Rejection*
- Peak hold
- Max/min
- Data hold
- Audible continuity
- Selectable auto power off
- Backlit display
- Low Battery Indicator**
- Includes leads, alligator clips and case
- CAT IV - 600V rating
- CAT III - 1000V rating
- 2-year warranty
ISSWWW and IDEAL Industries
IDEAL Electrical is part of IDEAL INDUSTRIES, INC., a family-owned, professionally run company with a 100-year history of building relationships, providing top customer service and setting industry standards in the process.
J. Walter Becker’s founding principle of providing superior customer service remains the guiding force behind our partnerships with the world's leading distributors, a state of the art delivery system around the world, outstanding customer and technical support and variety of operational benefits designed to save you time and money.
| Key Features | Current AC/DC, TRMS, Data Hold, Frequency Measurement, Backlit LCD Screen | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Ideal Industries | ||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||
| Product Stock Status | Next Day Delivery (subject to availability) |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA