Fluke FEV350/Kit EV charging station analyzer 5602653
- Complete EV Solution
- For Type 1 & Type 2 adapters
- TruTest™ EV Charging software module
- PE (protective) earth pre-test
- 30 mA RCD + 6 mA RDC-DD trip test
- Auto control pilot (CP) with waveform analysis
- Proximity pilot and error testing
- Earth bond Insulation and Loop/line Impedance
- IEC/EN 61851-1 and IEC/HD 60364-7-722
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Fluke FEV350/KIT EV Charging Station Analyzer 5602653
Complete with Type 2 adapter and a 1664FC multifunction tester.
Test the safety and functionality of AC electrical vehicle charging stations with the all-in-one tool that is safe, portable, and easy to use.
The FEV350 is a complete solution for safety and performance testing of AC EV charging stations with Type 2 or Type 1 connectors. Designed for technicians required to perform and document multiple tests quickly and efficiently without carrying multiple tools.
The solution includes TruTest™ EV Charging software module for documentation and reporting. The solution performs these measurements: PE (protective) earth pre-test, visual inspection, 30 mA RCD + 6 mA RDC-DD trip test, nominal voltage + phase sequence, auto control pilot (CP) with waveform analysis, proximity pilot, and error testing.
The supporting measurements are: earth bond, insulation, and loop/line impedance, available with Fluke’s compatible multifunction installation testers for installation certification/inspections via wireless Bluetooth connection, wiring configuration diagrams, and info screens for seamless integration with TruTest software for report generation.
The Fluke FEV350 provides predetermined test plans and pass/fail indications on measurement results to simplify analysis and time spent testing. The FEV350 EV Charging Station Analyzer is designed in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722.
Fluke FEV350/KIT Comes Supplied With:
- FEV350/BASIC Test Analyzer
- FEV300-CON-TY2
- Zero Adapter/TY2
- TPAK Magnetic Hanger
- Soft Carrying Bag
- Fluke 1664FC Multifunction Tester
Available in various kit options:
FEV350/TY2
FEV350/TY2 PRO
FEV350 TY2/TY1
FEV350 TY2/TY1 PRO
FEV350/KIT (This item)
Main Applications:
• Safety testing of charging stations
• Functional testing of charging stations
• Troubleshooting/repair of charging stations
Electricians that install or perform maintenance of EV Charging stations (level 1, 2 or Mode 3 – residential and commercial) (O&M)
Troubleshoots and performs critical maintenance testing of AC EVSEs. Works/acts as a test and measurement tool without the need for multimeters or scope meters. Compatible with the Fluke 1664 FC multifunction tester for full installation certification.
- Provides critical protective ground testing of the station.
- Comprehensive EVSE test tool with UI to support full installation certification and advanced functionality of CP waveform analysis.
- Only tool to support all AC EVSE connectors available.
- IEC-61851 / IEC-60364 Compliant
- TYPE 2 Connector works with stations with a socket outlet or connector (unique)
- FEV350 performs 30 mA and 6 mA RCD and RDC-DD measurements directly on analyzer.
Features and Functions:
- Available measurements:
PE (protective) earth pre-test to ensure no dangerous voltage is present
Visual inspection
30 mA RCD + 6 mA RDC-DD trip test
Nominal voltage + phase sequence
Auto control pilot (CP) with waveform analysis
Proximity pilot
Error testing - Supported measurements:
Earth bond
Insulation
Loop/line impedance - Compatible with EV Charging stations with Type 2 and Type 1 sockets/connectors
- Compatible with Fluke multifunction installation testers for installation
certification/inspections via wireless Bluetooth connection - Supported through TruTest™ software via EVSE module for documentation and
reporting.
Which Model is Right for You?
|
|
FEV350/YT2 | FEV350/ TY2 PRO |
FEV350 TY2/TY1 |
FEV350 TY2/TY1 PRO |
FEV350/KIT | |
| FEV350/BASIC Test Analyser | 1 | 1 | 1 | 1 | 1 | |
| FEV300-CON-TY1 | 1 | 1 | ||||
| FEV300-CON-TY2 | 1 | 1 | 1 | 1 | 1 | |
| Zero Adapter/TY1 | 1 | 1 | ||||
| Zero Adapter/TY2 | 1 | 1 | 1 | 1 | 1 | |
| TPAK Magnetic Hanger | 1 | 1 | 1 | 1 | 1 | |
| Soft Carrying Bag | 1 | 1 | 1 | 1 | 1 | |
| Trutest Software License | 1 | 1 | ||||
| 1664 FC Multifunction Tester | 1 | |||||
Fluke TruTest™ Software 
Data Management and Reporting Software with EVSE Module
(Full version NOT included with this package)
Spend less time processing test results and compiling reports
The reporting necessary to close out projects can be challenging and time-consuming. Cover all your certification and documentation needs through the modern, fast, and reliable software platform ofTruTest™.
TruTest™ allows for EV Charging asset management, data storage, and reporting on a single
platform. Whether you are analyzing Control Pilot waveforms or safety testing the system, proper data management is critical for producing easy-to-understand reports for clients. Compatible with the Fluke FEV350 EV Charging Analyzer, TruTest™ Software allows you to quickly import measurement results directly from your EV charging analyzer to the computer, organize and analyze the data, compare individual asset data against previous measurements imported and provide a comprehensive and visual client report.
• Easily manage measurement data from EVSE inspections
• Quickly create inspections and reports
• Control Pilot waveform analysis with easy pass/fail visuals
• Compare site data to previous site data to see changes over time
• Quickly access the latest firmware to update your FEV350
• A free 60-day demo version of TruTest™ is available
Fluke 1664 FC Multifunction Tester
The Fluke 1664 Multifunction Installation Tester is a great way to test for local regulations in a quick and efficient manner. Whether you're looking to share results in real time or protect your appliances, the Fluke 1664 Multifunction Installation Tester has you covered.
Out of the Fluke's new multifunction testers (1662, 1663, 1664), the 1664 is definitely equipped with the most new features. With the AutoTest function, you can reduce your testing time by up to 40%. Not to mention the improved accuracy of your results. The Insulation Pretest function has also been designed to alert you of any mistakes, stopping the test and providing you with a visual warning. This is currently the only tester on the market with this advanced safety features.
Includes:
- 6x AA (IEC LR6) cell batteries
- C1600 hard carrying case
- Zero adapter
- Heavy-duty mains cord
- STD standard test lead set
- C1600 hard carrying case
- Padded carrying and waist strap
- Quick reference guide
- TP165X remote control probe and lead
- User's manual on CD-ROM
- FREE Traceable Calibration Certificate
The versatility of the Fluke Multifunction Tester
Insulation-continuity test: our installation tester does the job.
Fluke installation testers can be used to perform an insulation-continuity test, which is designed to diagnose and prevent the breakdown of the insulation in various parts of the electrical system such as wires, transformers and motors. The quality of insulation is critical to assure proper, uninterrupted and safe functioning of electrical circuits.
Checking RCD devices with a Fluke multifunction tester.
Our versatile installation testers can also check the proper functioning of residual-current devices (RCDs). RCDs are designed to disconnect quickly to mitigate the harm caused by electric shock and to avoid current leaks that may lead to fire and other dangerous situations. Our installation testers assure that RCDs can properly perform this important task.
The perfect loop testing tool: a Fluke installation tester.
Loop testing is a quick, convenient, and highly specific method of evaluating an electrical circuit for its ability to engage protective devices (circuit breakers, fuses, RCDs). A ground loop determines the effectiveness of protective devices.
Resistance measurement of grounding systems.
The electrical installation testing abilities of the Fluke installation tester also include verification tests to ensure that a system's resistance is low enough to provide protection to people, equipment and structures. A properly functioning grounding system is a critical safety feature of an electrical system.
Protect the installation, avoid costly mistakes.
The Fluke 1664 FC Installation Tester is the only Installation with "Insulation PreTest," which warns you about potentially serious and costly mistakes. If the tester detects that an appliance is connected to the system under test, it will stop the insulation test and provide a visual warning. This helps eliminate accidental damage to peripheral equipment and keeps your customers happy.
Fluke Connect and FlukeCloud™ Storage:
Share from anywhere.
Stay on the same page even when you and your team are in different places. Fluke Connect allows your 1664 FC Installation Tester to send test results to your smartphone so you can connect and collaborate with others. It's the fastest way to let your team see what you see, helping you get approvals without leaving the field.
Retrieve stored results from anywhere
FlukeCloud™ storage allows you to retrieve stored results whether you are in the office or in the field to make decisions in real-time. Plus you can import the data into Fluke DMS to process and generate certificates. Plus you get world-class data protection. Safe. Secure. Fast. More accurate. All from the power of Fluke Connect.
isswww and Fluke Instruments
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software.
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.
From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, meteorologists, medical-device manufacturers, and computer network professionals, people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.
Fluke are a founding core supplier of ISSWWW and we enjoy a personal and professional relationship with them. We have Fluke-trained staff on site and we hold an extensive range of their products. Our customers know that when it comes to Fluke products, we have great prices and exceptional advice and support services, reassuring when you need to make that all-important purchase.
| Key Features | Complete EV Solution, For Type 1 & Type 2 adapters, TruTest™ EV Charging software module, PE (protective) earth pre-test, 30 mA RCD + 6 mA RDC-DD trip test, Auto control pilot (CP) with waveform analysis, Proximity pilot and error testing, Earth bond Insulation and Loop/line Impedance, IEC/EN 61851-1 and IEC/HD 60364-7-722 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Fluke Testers | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
*A more detailed technical breakdown is available in our resources tab above. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA