- Features & Specification
Fluke 87V MAX TRMS Digital Multimeter
For use in extreme environments
The Fluke 87V MAX True-rms Digital Multimeter defines a new standard for operating in extreme conditions with the features and accuracy to troubleshoot most electrical problems. The 87V MAX has an IP 67 (waterproof and dustproof) rating, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and has been designed and tested to withstand a 4 m (13 ft) drop. The Fluke 87V MAX Truerms Digital Multimeter is built to work in the toughest environments you might face. The 87V MAX also gives users a rugged case and removable holster that has been drop tested to 4 meters.
Fluke 87V Industrial Multimeter Service Combo Kit Includes:
- Fluke 87V Industrial Multimeter
- Fluke i400 400 A AC Current Clamp
- 80BK-A DMM Temperature Probe
- TL75 Hard Point Test Lead Set
- AC175 Threaded Alligator Clip Set
The Fluke 289 is a high-performance industrial logging multimeter. This Fluke Connect-compatible DMM is designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. It provides the ability to log data and graphically review up 10,000 recorded events and logged readings with on-board TrendCapture. Zoom on trend provides a 14x zoom to view and analyze data—without needing a PC.
The i400 AC Current Clamp provides accurate current measurements up to 400 A ac without breaking electric circuits. Flexible, heat resistant test leads and alligator clips complete this high-performance kit.
Fluke-87V Multimeter has true-rms accuracy and advanced functionality to give you the results you need
- True-rms accuracy with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
- Efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations
- A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS
- Lifetime warranty, backed by a brand you trust.
Fluke-i400 AC 400A Current Clamp turns the 87V into a clamp meter
- The current clamp provides accurate current measurements up to 400 A ac without breaking electric circuits
- Allows taking measurements safely with industry standard safety ratings
Select accessories like temperature probe, test leads and alligator clips
- The 80BK-A DMM Temperature Probe plugs into the 87V’s voltage jacks and allows temperature measurements from -40 °C to 260 °C (-40 °F to 500 °F)
- TL75 Test Leads and AC175 Alligator Clips complete this versatile kit.
Key safety features
- Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.
- Designed to withstand spikes of more than 8000 V. Audible Input Alert warning against wrong use of input jacks
ISSWWW and Fluke Instruments
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software.
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.
From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, meteorologists, medical-device manufacturers, and computer network professionals, people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.
Fluke are a founding core supplier of ISSWWW and we enjoy a personal and professional relationship with them. Our sales staff and our technicians are Fluke trained and we hold perhaps the largest stock of their products in the country. Our customers know that when it comes to Fluke products, we have not only the best prices but the best advice and support services, reassuring when you need to make that all important purchase.
|Fluke 87V MAX Specification|
|DC Voltage||Max. resolution Accuracy 0.1 mV to 1000 V / 0.05 % + 1|
|AC Voltage||Max. resolution Accuracy 0.1 mV to 1000 V / 0.7 % +|
|DC Current||Max. resolution Accuracy 0.1 μA to 10 A / 0.2 % + 4|
|AC Current||Max. resolution Accuracy 0.1 μA to 10 A / 1.0 % + 2|
|Resistance||Max. resolution 0.1 Ω to 50 MΩ|
|Capacitance||1 nF to 9999 μF|
|Frequency||0.5 Hz to 199.99 kHz|
|Temperature||-200 °C to +1090 °C|
|Low Pass Filter
(Measurement on VFD's)
|Safety Rating||CAT IV 600 V, CAT III 1000V|
|Power||Three AA batteries|
|Battery Life||1600 hours|
|Peak Transient Capture||250 μs|
|Relative Readings (Zero)||Yes|
|Battery Type||3 x AA|
|Warranty & Protection|
|Safety Rating||CAT IV 600 V/CAT III 1000 V|
|External Protection||Rubber Holster|
|Drop Test||10ft Drop Test|
|Size (HxWxL) with Holster||
6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in)
|Weight with Holster||698.5 g (1.54 lb)|
|Fluke i400 400A AC Current Clamp Specifications|
|Nominal current range||400 A|
|Continuous current range||1 A - 400 A|
|Maximum non-destructive current||1000 A|
|Lowest measurable current||1 A|
|Basic accuracy||2% + 0.06 A|
|(% reading + floorspec)|
|Useable frequency||5 Hz - 20 kHz|
|Output level(s)||1 mA/A|
|Safety||CAT IV 600 V, CAT III, 1000 V|
|Maximum voltage||1000 V AC rms from earth to ground, in compliance with EN61010|
|Mechanical and General Specifications|
|Maximum conductor diameter||32 mm (1.25 in)|
|Maximum conductor size (busbar)||750 MCM|
|Output cable length||1.5 m (59 in)|
|Shrouded banana plugs||Yes|
Orders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.
Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Temporarily revised June 2020)
Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.
Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B
Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.
Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.
Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.
Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at firstname.lastname@example.org
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA