Fluke 750PD6 Dual Range Pressure Module (-1 to 7 Bar) 4352595

Name: Fluke 750PD6 Dual Range Pressure Module (-1 to 7 Bar) 4352595
Brand: Fluke Testers
SKU: FLU750PD6
Price: 1866 GBP
Availability: InStock

£1,866.00

SKU

FLU750PD6

The Fluke 750PD Dual Pressure Modules. Precision pressure measurement for 75X and 720 series calibrators.

Price Banner

Important Calibration Information

This instrument comes with a *manufacturers calibration certificate.
Please see *below.

Manufacturer Certificate Included
High Accuracy and Performance
Dual Range Pressure Module
Easy-to-use

Information on the calibration of newly purchased equipment and what it means to you.

Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Personalised traceable calibration certificate from isswww

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.

Skip to the end of the images gallery

Fluke 750PD Dual Pressure Module Front View

Skip to the beginning of the images gallery

Description

Fluke 750PD6 Dual Range Pressure Module

-15 psi to 100 psi and -100 to 700 kPa

*Important Calibration Information:

This instrument comes complete with the manufacturer’s calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Overview:

A family of 48 pressure modules covers pressure calibrations from 0 to 1 in H20 to 10,000 psi (2.5 mBar to 690 bar).

Gauge pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labeled for range, overpressure, and media compatibility. All modules include NPT, metric (BSP), and M20 adapters. Compatible with all documenting, multifunction, and pressure calibrators (including Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717, and legacy 741, 743, 744, 701, and 702 calibrators).

Fluke 750PD6 Comes Supplied With:

Pressure module
Traceable calibration certificate
Adapters
Manual

Quick and Easy Measurements

Fluke 750P Series Pressure Modules are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. When used with the 750 Series Documenting Process Calibrators, pressure readings can be date/time stamped and stored electronically for later retrieval. This saves time, eliminates errors, and supports compliance with quality standards and regulations.

Choose from:

Differential modules
Gauge modules
High-pressure modules
Absolute modules
Vacuum modules
Dual range modules
Reference modules

Fluke 750PD2	1 psi to 1 psi (-70 to 70 mBar) (-7 to 7 kPa)
Fluke 750PD3	-5 psi to 5 psi (-350 to 350 mBar) (-35 to 35 kPa)
Fluke 750PD4	-15 psi to 15 psi (-1 to 1 Bar) (-100 to 100 kPa)
Fluke 750PD5	-15 psi to 30 psi (-1 to 2 Bar) (-100 to 200 kPa)
Fluke 750PD6	-15 psi to 100 psi (-1 to 7 Bar) (-100 to 700 kPa)
Fluke 750PD7	-15 psi to 200 psi (-1 to 14 Bar) (-100 to 1400 kPa)
Fluke 750PD10	-10 psi to 10 psi (-0.7 to 0.7 Bar) (-70 to 70 kPa)
Fluke 750PD27	-15 psi to 300 psi (-1 to 20 Bar) (-100 to 2000 kPa)
Fluke 750PD50	-15 psi to 50 psi (-1 to 3.5 Bar) (-100 to 350 kPa)

Precision Pressure Measurement for 75X and 720 Series Calibrators

The 750P Series Pressure Modules are the ideal pressure modules to enable gauge, differential, and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure.

0.025% reference uncertainty
6-month and 1-year specifications
Temperature compensated 0°C to 50°C
Digital communication to calibrators, no analog losses or errors
Broad selection of ranges
Gauge, differential, dual range, absolute, and vacuum measurement model

ISSWWW and Fluke Instruments

Fluke Corporation is the world leader in the manufacture, distribution, and service of electronic test tools and software.

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission-critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.

From industrial electronic installation, maintenance, and service, to precision measurement and quality control, Fluke tools help keep businesses and industries around the globe up and running. Typical customers and users include technicians, engineers, meteorologists, medical device manufacturers, and computer network professionals, people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Fluke is a founding core supplier of ISSWWW and we enjoy a personal and professional relationship with them. Our sales staff and our technicians are Fluke-trained and we hold perhaps the largest stock of their products in the country. Our customers know that when it comes to Fluke products, we have not only the best prices but the best advice and support services, reassuring when you need to make that all-important purchase.

Features & Specification

More Information

Key Features

Manufacturer Certificate Included, High Accuracy and Performance, Dual Range Pressure Module, Easy-to-use

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Fluke Testers

Short Description

Differential Module Specifications
Model	Parameter / range		Burst rating⁶	Hi side media²	Lo side media²
750P00	0 to 1 inH₂O (0 to 2.5 mBar)		30X	Dry air	Dry air
750P01	0 to 10 inH₂O (0 to 25 mBar)		3X	Dry air	Dry air
750P02	0 to 1 psi (0 to 70 mBar)		3X	Dry air	Dry air
750P22	0 to 1 psi (0 to 70 mBar)		3X	316 SS	Dry air
750P03	0 to 5 psi (0 to 350 mBar)		3X	Dry air	Dry air
750P23	0 to 5 psi (0 to 350 mBar)		4X	316 SS	Dry air
750P04	0 to 15 psi (0 to 1 bar)		3X	Dry air	Dry air
750P24	0 to 15 psi (0 to 1 bar)		4X	316 SS	Dry air
Model	Reference uncertainty⁴	Total uncertainty 1-year (15-35°C)	Total uncertainty 1-year¹	Total uncertainty 6-month (15-35°C)	Total uncertainty 6-month¹
750P00	±0.15%	±0.3%	±0.35%	±0.25%	±0.30%
750P01	±0.1%	±0.2%	±0.3%	±0.15%	±0.25%
750P02	±0.050%	±0.1%	±0.15%	±0.075%	±0.125%
750P22	±0.050%	±0.1%	±0.15%	±0.075%	±0.125%
750P03	±0.02%	±0.04%	±0.05%	±0.035%	±0.04%
750P23	±0.02%	±0.04%	±0.05%	±0.035%	±0.04%
750P04	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P24	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
Gauge Module Specifications
Model	Parameter / range		Burst rating⁶	Hi side media²	Lo side media²
750P05	0 to 30 psi (0 to 2 bar)		4X	316 SS	N/A
750P06	0 to 100 psi (0 to 7 bar)		4X	316 SS	N/A
750P27	0 to 300 psi (0 to 20 bar)		4X	316 SS	N/A
750P07	0 to 500 psi (0 to 35 bar)		4X	316 SS	N/A
750P08	0 to 1000 psi (0 to 70 bar)		3X	316 SS	N/A
750P09	0 to 1500 psi (0 to 100 bar)		3X	316 SS	N/A
750P2000	0 to 2000 psi (0 to 140 bar)		3X	316 SS	N/A
Model	Reference uncertainty⁴	Total uncertainty 1-year (15-35°C)	Total uncertainty 1-year¹	Total uncertainty 6-month (15-35°C)	Total uncertainty 6-month¹
750P05	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P06	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P27	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P07	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P08	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P09	±0.0175%	±0.035%	± 0.045%	±0.03%	±0.04%
750P2000	±0.0175%	±0.035%	± 0.045%	±0.03%	±0.04%
High Pressure Module Specifications
Model	Parameter / range		Burst rating⁶	Hi side media²	Lo side media²
750P29	0 to 3000 psi (0 to 200 bar)		3X	316 SS	N/A
750P30	0 to 5000 psi (0 to 340 bar)		3X	316 SS	N/A
750P31	0 to 10000 psi (0 to 700 bar)		2X	316 SS	N/A
Model	Reference uncertainty⁴	Total uncertainty 1-year (15-35°C)	Total uncertainty 1-year¹	Total uncertainty 6-month (15-35°C)	Total uncertainty 6-month¹
750P29	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P30	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
750P31	±0.0175%	±0.035%	±0.045%	±0.03%	±0.04%
Absolute Module Specifications
Model	Parameter / range		Burst rating⁶	Hi side media²	Lo side media²
750PA3	0 to 5 psia (0 to 350 mBar)		4X	316 SS	N/A
750PA4	0 to 15 psia (0 to 1 bar)		4X	316 SS	N/A
750PA5	0 to 30 psia (0 to 2 bar)		4X	316 SS	N/A
750PA6	0 to 100 psia (0 to 7 bar)		4X	316 SS	N/A
750PA27	0 to 300 psia (0 to 20 bar)		4X	316 SS	N/A
750PA7	0 to 500 psia (0 to 35 bar)		4X	316 SS	N/A
750PA8	0 to 1000 psia (0 to 70 bar)		3X	316 SS	N/A
750PA9	0 to 1500 psia (0 to 100 bar)		3X	316 SS	N/A
Model	Reference uncertainty⁴	Total uncertainty 1-year (15-35°C)	Total uncertainty 1-year¹	Total uncertainty 6-month (15-35°C)	Total uncertainty 6-month¹
750PA3	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PA4	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PA5	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PA6	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PA27	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PA7	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PA8	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PA9	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
Vacuum Module Specifications
Model	Parameter / range		Burst rating⁶	Hi side media²	Lo side media²
750PV3	-5 psi (-350 mBar)		4X	316 SS	Dry air
750PV4	-15 psi (-1 bar)		4X	316 SS	Dry air
Model	Reference uncertainty⁴	Total uncertainty 1-year (15-35°C)	Total uncertainty 1-year¹	Total uncertainty 6-month (15-35°C)	Total uncertainty 6-month¹
750PV3	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PV4	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
Dual Range Specifications
Model	Parameter / range		Burst rating⁶	Hi side media²	Lo side media²
750PD2	-1 to 1 psi (-70 to 70 mBar)		4X	316 SS	Dry air
750PD3	-5 to 5 psi (-350 to 350 mBar)		4X	316 SS	Dry air
750PD10	-10 to 10 psi (-700 to 700 mBar)		4X	316 SS	Dry air
750PD4	-15 to 15 psi (-1 to 1 bar)		4X	316 SS	Dry air
750PD5	-15 to 30 psi (-1 to 2 bar)		4X	316 SS	—
750PD50	-15 to 50 psi (-1 to 3.5 bar)		4X	316 SS	—
750PD6	-15 to 100 psi (-1 to 7 bar)		4X	316 SS	—
750PD7	-15 to 200 psi (-1 to 14 bar)		4X	316 SS	—
750PD27	-15 to 300 psi (-1 to 20 bar)		4X	316 SS	—
Model	Reference uncertainty⁴	Total uncertainty 1-year (15-35°C)	Total uncertainty 1-year¹	Total uncertainty 6-month (15-35°C)	Total uncertainty 6-month¹
750PD2	±0.05%	±0.1%	±0.15%	±0.075%	±0.125%
750PD3	±0.03%	±0.06%	±0.07%	±0.05%	±0.06%
750PD10	±0.025%	±0.05%	±0.07%	±0.04%	±0.06%
750PD4	±0.0175%	±0.035%	±0.045%	±0.03%	± 0.04%
750PD5	± 0.0175%	± 0.035%	± 0.045%	±0.03%	± 0.04%
750PD50	± 0.0175%	± 0.035%	± 0.045%	±0.03%	± 0.04%
750PD6	± 0.0175%	± 0.035%	± 0.045%	±0.03%	± 0.04%
750PD7	± 0.0175%	± 0.035%	± 0.045%	±0.03%	± 0.04%
750PD27	± 0.0175%	± 0.035%	± 0.045%	±0.03%	± 0.04%
Reference Module Specifications
Model	Parameter / range		Burst rating⁶	Hi side media²	Lo side media²
750R04⁵	0 to 15 psi (0 to 1 bar)		3X	Dry air	Dry air
750R06⁵	0 to 100 psi (0 to 7 bar)		4X	316 SS	—
750R27	0 to 300 psi (0 to 20 bar)		4X	316 SS	—
750R07	0 to 500 psi (0 to 35 bar)		4X	316 SS	—
750R08⁵	0 to 1000 psi (0 to 70 bar)		3X	316 SS	—
750R29	0 to 3000 psi (0 to 200 bar)		3X	316 SS	—
750R30	0 to 5000 psi (0 to 340 bar)		3X	316 SS	—
750R31⁵	0 to 10000 psi (0 to 700 bar)		2X	316 SS	—
750RD5	-15 to 30 psi (-1 to 2 bar)		4X	Dry air	—
750RD6⁵	-12 to 100 psi (-1 to 7 bar)		4X	316 SS	—
750RD27	-12 to 300 psi (-0.8 to 20 bar)		4X	316 SS	—
Model	Reference uncertainty⁴	Total uncertainty 1-year (15-35°C)	Total uncertainty 1-year¹	Total uncertainty 6-month (15-35°C)	Total uncertainty 6-month¹
750R04⁵	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750R06⁵	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750R27	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750R07	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750R08⁵	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750R29	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750R30	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750R31⁵	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750RD5	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750RD6⁵	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
750RD27	±0.01% of FS	±0.02% of FS	±0.04% of FS	±0.015% of FS	±0.035% of FS
1. Total uncertainty, % of full span for temperature range 0°C to +50°C, one year interval. Total uncertainty, 1.0% of full span for temperature range -10°C to 0°C, one year interval. No 6 month specification available for range -10°C to 0°C. 2. “Non-corrosive gasses” indicates Dry air or non-corrosive gas as compatible media. “Stainless Steel 316-SS” indicates media compatible with Type 316 Stainless Steel. 3. Specifications % of Full Span unless otherwise noted. 4. Reference Uncertainty is the specification for as left data for 24 hours. 5. When reference class modules are used with fixed resolution products (717, 718, 719 series, 725 and 726) calibrators add ±1 count to the overall accuracy specification. 6. Burst rating specification refers to the multiplier times full scale of the module for the rated burst pressure.

Resources

Brochure*

(Size: 7.3 MB)

Datasheet*

(Size: 979.7 KB)

* You have to Login or Register to download this file

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA