Fluke 700G01 Pressure Gauge Calibrator 20mbar 4353523
- Absolute pressure measurement ranges 15 30 100 300 psia
- Ranges: ±10 inH2O/20 mbar to 10000 psi/690 bar
- Accuracy to 0.05 % of full scale
- Easy to use rugged construction
- CSA Class 1 Div 2 Groups A-D rating
- ATEX rating: II 3 G Ex nA IIB T6
- Log up to 8493 pressure measurements (requires software)
- ¼ in NPT Male
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Fluke 700G01* Pressure Gauge Calibrator 20mbar 4353523
-10 to +10 inH2O
-20 mbar to 20 mbar
Portable, high-quality round pressure gauge calibrator for fast and accurate calibration test results
Fluke 700G Series precision pressure gauge calibrators are portable, high quality calibrators offering fast and accurate calibration test results. The 700G models are easy-to-use and of rugged construction for reliable performance in different environments. They are compatible with most hydraulic and pneumatic test pumps.
*Important Calibration Information:
This instrument comes complete with the manufacturer’s calibration certificate. Please be aware that these certificates are generic and may also be time lapsed.[Text Wrapping Break]If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.
Included:
- Manual on CD-ROM in 14 languages
- Traceable certificate of calibration
- 1/4˝ NPT to 1/4˝ ISO adapter
Key Features:
Designed for field pressure calibration, the Fluke 700G Series Pressure Gauge Calibrators give you the performance and durability that you have come to expect in Fluke pressure calibration products while being simple and easy-to-use. Whether you’re looking to connect to either a hydraulic or pneumatic test pump this series are designed to be a complete calibration solution with:
- The 700 series includes 23 pressure gauges from ±10 inH2O/20 mbar to 10,000 psi/690 bar
With a standard accuracy of 0.05% of full scale and reference class gauges with accuracies of 0.04% you’re sure to find a gauge that’s the perfect fit for your application.
Pressure gauge data logging
The Fluke 700G series gauges and pump kits are designed for the pressure testing professional working on process pressure instrumentation. The pressure ranges of the 700G series gauges cover the ranges needed for process pressure calibration needs including Gage pressures +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressures from 0 to 15 psia (0-1 bar) to 0-300 psi (0-20 bar) and reference class gauges from 0 to 30 PSI (0-2 bar) to 10,000 psi (0-690 bar).
- Standard accuracy to 0.05% of full scale
- Reference class gauges deliver 0.04% of reading measurement accuracy
- Pressure gauge data logging for more than 8,493 pressure measurements to memory and uploads to a PC (with 700G/TRACK software)
Rugged design with intrinsically safe certification
- Rugged sealed IP-67 enclosure with included protective holster
- Allows you to work safely in classified areas known to include explosive gasses:
- CSA: Class 1, Div2, Groups A-D rating
- ATEX: II 3 G Ex ic IIB T6 Gc
- Standard 3-year warranty
Easy-to-use pressure solution
Pressure gauge calibrators are the easiest to use of all pressure calibration tools. Power them up, connect to the pressure device you want to measure and see your measurement, it’s that easy. When used with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump kit the 700G becomes a complete pressure sourcing and measurement solution. The 700PTPK2 and 700HTPK2 premium pump kits offer easy connectivity to the gauge and device under test providing “no tools required” connections.
- Complete pressure calibration solution when gauges are paired with special pump kits
- Calibrate to 600 psi (20 bar) with the 700PTPK or 700PTPK2 pneumatic pump kit.
- Calibrate to 10,000 psi (690 bar) with the 700HTPK or 700HTPK2 hydraulic pump kit.
Fluke 700G Pressure Gauge Calibrator Selector
| Model | Range | Resolution | Accuracy | Burst Pressure |
|---|---|---|---|---|
| Fluke-700G01 | -10 to +10 inH2O -20 mbar to 20 mbar |
0.001 inH2O, 0.001 mbar |
Positive pressure ±0.1% of range, Vacuum ±0.1% of range |
3 psi, 210 mbar |
| Fluke-700G02 | -1 to +1 psi, -70 mbar to 70 mbar |
0.0001 psi, 0.001 mbar |
Positive pressure ±0.1% of range, Vacuum ±0.1% of range |
5 psi, 350 mbar |
| Fluke-700G04 | -14 to 15 psi, -0.97 to 1 bar |
0.001 psi, 0.0001 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
60 psi, 4 bar |
| Fluke-700G05 | -14 to 30 psi, -0.97 to 2 bar |
0.001 psi, 0.0001 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
120 psi, 8 bar |
| Fluke-700G06 | -12 to 100 psi, -0.83 to 6.9 bar |
0.01 psi, 0.0001 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
400 psi, 26 bar |
| Fluke-700G27 | -12 to 300 psi, -0.83 to 20 bar |
0.01 psi, 0.001 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
1200 psi, 80 bar |
| Fluke-700G07 | -12 to 500 psi, -0.83 to 34 bar |
0.01 psi, 0.001 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
2000 psi, 138 bar |
| Fluke-700G08 | -14 to 1000 psi, -0.97 to 69 bar |
0.1 psi, 0.001 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
4000 psi, 266 bar |
| Fluke-700G10 | -14 to 2000 psi, -.97 bar to 140 bar |
0.1 psi, 0.01 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
8000 psi, 550 bar |
| Fluke-700G29 | -14 to 3000 psi, -0.97 to 200 bar |
0.1 psi, 0.01 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
10000 psi, 690 bar |
| Fluke-700G30 | -14 to 5000 psi, -0.97 to 340 bar |
0.1 psi, 0.01 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
10000 psi, 690 bar |
| Fluke-700G31 | -14 to 10000 psi, -0.97 to 690 bar |
1 psi, 0.01 bar |
Positive pressure ±0.05% FS Vacuum ±0.1% FS |
20000 psi, 1035 bar |
| Fluke-700GA4 | 0 to 15 psia, 0 to 1 bar absolute |
0.001 psi, 0.0001 bar |
±0.05% of range | 60 psi, 4 bar |
| Fluke-700GA5 | 0 to 30 psia 0 to 2 bar absolute |
0.001 psi, 0.0001 bar |
±0.05% of range | 120 psi, 8 bar |
| Fluke-700GA6 | 0 to 100 psia, 0 to 6.9 bar absolute |
0.01 psi, 0.0001 bar |
±0.05% of range | 400 psi, 27 bar |
| Fluke-700GA27 | 0 to 300 psia, 0 to 20 bar absolute |
0.01 psi, 0.001 bar |
±0.05% of range | 1200 psi, 80 bar |
| Fluke-700RG05 | -14 to +30 psi, -0.97 to +2 bar |
0.001 psi, 0.0001 bar |
Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.05% of range |
90 psi, 6 bar |
| Fluke-700RG06 | -12 to 100 psi, -0.83 to 6.9 bar |
0.01 psi, 0.0001 bar |
Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range |
400 psi, 27 bar |
| Fluke-700RG07 | -12 to 500 psi, -0.83 to 34 |
0.01 psi, 0.001 bar |
Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range |
2000 psi, 138 bar |
| Fluke-700RG08 | -14 to 1000 psi, -0.97 to 69 bar |
0.1 psi, 0.001 bar |
Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range |
4000 psi, 275 bar |
| Fluke-700RG29 | -14 to 3000 psi, -0.97 to 200 bar |
0.1 psi, 0.01 bar |
Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range |
10000 psi, 690 bar |
| Fluke-700RG30 | -14 to 5000 psi, -0.97 to 340 bar |
0.1 psi, 0.01 bar |
Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range |
15000 psi, 1035 bar |
| Fluke-700RG31 | -14 to 10000 psi, -0.97 to 690 bar |
1 psi, 0.01 bar |
Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range |
20000 psi, 1380 bar |
| Media compatibility |
|---|
|
| Mechanical Specifications | |
|---|---|
| Dimensions (H x W x D) | 12.7 x 11.4 x 3.7 cm (5 x 4.5 x 1.5 in) |
| Pressure connection | ¼ in NPT Male |
| Housing/Weight | Cast ZNAL 0.56 kg (1.22 lb) with holster |
| Display | 5-1/2 digits, 16.53 mm (0.65 in) high 20-segment bar graph, 0 to 100% |
| Power | Three (3) AA alkaline batteries |
| Battery life | 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate |
isswww and Fluke Instruments
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software.
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission-critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.
From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep businesses and industries around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals, people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.
Fluke are a founding core supplier of ISSWWW and we enjoy a personal and professional relationship with them. Our sales staff and our technicians are Fluke trained and we hold perhaps the largest stock of their products in the country. Our customers know that when it comes to Fluke products, we have not only the best prices but the best advice and support services, reassuring when you need to make that all-important purchase.
| Key Features | Absolute pressure measurement ranges 15 30 100 300 psia, Ranges: ±10 inH2O/20 mbar to 10000 psi/690 bar, Accuracy to 0.05 % of full scale, Easy to use rugged construction, CSA Class 1 Div 2 Groups A-D rating, ATEX rating: II 3 G Ex nA IIB T6, Log up to 8493 pressure measurements (requires software), ¼ in NPT Male | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Fluke Testers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description | Fluke 700G Series Technical Specifications
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA