Fluke 17XX-CLAMP-ADPT-2V8 BNC Adapter for 2.8V Clamps 5363485
- 17xx Connector
- BNC Connector
- 18cm Long Cable
- For Use With Current Clamps
- DC Current Measurements
- Output Maximum of 2.8V AC/DC
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Fluke 17XX-CLAMP-ADPT-2V8 BNC Adapter for 2.8V Clamps 5363485
Fluke 17XX-CLAMP-ADPT-2V8 Comes Supplied With:
- BNC Adapter
- Instruction Sheet
- One-Year Warranty
Key Features:
- 7" (18 cm) long cable with 17XX connector and BNC connector
- For current clamps featuring a maximum output of 2.8 V
- Scale factor set in the instrument as mV/A
- mV/A conversion for 17XX instruments
- Current measurement using iron-cored current transformers
- Enables DC measurements
- DC power with instrument
- Female BNC connector
- Internal conductor protection
- Label indicating adapter type
- Protects your past investments in previously purchased current clamps from Fluke or other manufacturers
- Gives the ability to use specialty current clamps
- CAT IV, 600V and CATIII 1000 V rating according to IEC61010-2-30 appendix 2
- Allows users to connect to a wider range of current clamps including measurement of DC for 177X products
- Used to connect three-phase measurement equipment and in any electrical panel for connection of measurement equipment
Overview:
Compatible with current clamps featuring an output maximum of 2.8 V AC/DC, this BNC adapter allows the connection of AC or DC clamps to 17XX multimeters. In addition, this adapter consists of a cable with a plug that fits 17XX multimeters and a female BNC connector, allowing other current clamps connections with mV/A outputs.
Applications:
- Users who need DC measurements (output of solar strings, inputs to DC-AC inverters, battery testing, etc.)
- Users who aren't satisfied by the existing range of 17XX current clamps
- Users who would prefer to use current clamps they already own
- Consulting engineers and equipment manufacturers (panel builders) advising users on equipment installation
- Facility managers
- Safety, design, and senior electrical engineers
- Electrical contractors and technicians
- Electricians
isswww and Fluke Instruments
Fluke Corporation is the world leader in manufacturing, distributing, and servicing electronic test tools and software.
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.
From industrial electronic installation, maintenance, and service, to precision measurement and quality control, Fluke tools help keep businesses and industries around the globe up and running. Typical customers and users include technicians, engineers, meteorologists, medical device manufacturers, and computer network professionals, people who stake their reputations on their tools, and use tools to help extend their power and abilities.
Fluke is a founding core supplier of ISSWWW and we enjoy a personal and professional relationship with them. We have Fluke-trained staff on site and we hold an extensive range of their products. Our customers know that we have great prices and exceptional advice and support services when it comes to Fluke products, reassuring when you need to make that all-important purchase.
| Key Features | 17xx Connector, BNC Connector, 18cm Long Cable, For Use With Current Clamps, DC Current Measurements, Output Maximum of 2.8V AC/DC | ||||||
|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||
| Manufacturer | Fluke Testers | ||||||
| Short Description |
|
||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA