FLIR MR59 Ball Probe Moisture Meter With Bluetooth
- Hold Function
- LCD Display
- Bluetooth Connectivity
- METERLiNK Compatibility
- Low Battery Indication
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
FLIR MR59 Ball Probe Moisture Meter With Bluetooth
The MR59 is an affordable tool for moisture remediation and pest control professionals, home or building inspectors, and flooring installers. The pinless meter features wireless connectivity, making it easy to view and share readings from a mobile device. The MR59’s ball-tip sensor measures into corners and around baseboards with ease, helping you cover a large area in a short time without making a mark. It can also detect problems below the surface. Create heat maps of affected areas to locate hidden sources and migration paths of moisture. Then send measurement data wirelessly to FLIR Tools Mobile for live display or to compatible FLIR thermal cameras for later analysis and reporting.
Key Features:
- Features a non-invasive ball-probe sensor
- Detects moisture up to 100 mm (4 in) below surface (depending on material)
- Transmits live readings to a mobile device via the FLIR Tools® Mobile app
- Durable to withstand a 2 m drop (6.4 ft)
- Large, backlit display and bright worklight
Locate Hidden Moisture Efficiently
Survey large areas quickly and non-destructively.
- Easily run the meter over and around objects on the measuring surface with the ball-probe sensor
- Create a heat map of the affected area and follow the migration path to a hidden source of moisture
- Identify potential moisture problems up to 4" (100 mm) below the surface
Inspect Anywhere with Ease
Designed to make your job easier and more efficient.
- Wirelessly connect the meter to FLIR Tools Mobile to view readings on a mobile device
- Work in dim lighting with the backlit display and bright work-light
Rely on this Meter to Get the Job Done
Take the durable, drop-tested meter to every job.
- Detect moisture in a wide range of common building materials
- Receive stable, repeatable readings
- The meter’s handgrip is designed to prevent hands from interfering with measurements
- Take advantage of product enhancements by upgrading firmware as needed via micro USB port (located in battery compartment)
Applications
- Moisture remediation
- Pest control
- Home and building inspection
- Floor installation
About FLIR
FLIR Systems - The World's Sixth Sense
FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. We bring innovative sensing solutions into daily life through our thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. Our products improve the way people interact with the world around them, enhance public safety and well-being, increase energy efficiency, and enable healthy and entertained communities.
| Key Features | Hold Function, LCD Display, Bluetooth Connectivity, METERLiNK Compatibility, Low Battery Indication | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||
| Manufacturer | FLIR | ||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA