FLIR ETS320 Thermal Imaging System Benchtop Camera
- Sprectral Range 7.5–13 µm
- 320 x 240 pixels
- Touch Screen
- Switch Between °F and °C
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
FLIR ETS320 Thermal Imaging System
Performing critical analysis of printed circuit boards and other small electronics just got significantly easier.
The FLIR ETS320 is a non-contact thermal imaging system designed specifically for use in product testing, scientific research and for educational use, combining together a high-sensitivity thermal imager from FLIR with an integrated stand, ideal for looking at even the smallest components.
The ETS320 Comes Supplied With:
- ETS320 Camera System
- Mount
- Microscope-Style Stand
- Power Supply
- USB Cable
- FLIR Tools+ Software Package
Key Features
- Benchtop-based stand with integrated FLIR precision thermal camera for thermal studies of electronic components and printed circuit boards
- Take the guesswork out of thermal testing – view the entire electronic at once and easily find hot spots and potential points of failure
- Highly sensitive thermal detector can detect thermal shifts as low as <0.06°C
- Wide temperature measurement range – quantifies heat generation and thermal dissipation up to 250°C
- High quality thermal detector with resolution of 320 x 240 pixels (76,800 pixels in image)
- Fully radiometric analysis – every pixel in the image is assigned its own temperature reading, allowing you to hone in on specific points for detailed analysis
- Hands-free operation – simply set the stand/mount to the height you need and start viewing in thermal
- High accuracy temperature measurements within ±3°C – ideal for quality assurance and factory acceptance of printed circuit boards
- Crisp, 3” LCD display for viewing thermal findings in real time
- Supports full radiometric IR video streaming to a PC using USB, or non-radiometric colourised video
- Capture thermal images with a simple button press and transfer to PC for further analysis
No More Thermocouples and RTDs
Using thermocouples and RTD temperature sensors to determine whether your components are working correctly may be a traditional route, but it certainly isn’t an efficient one. With thermocouples and RTD sensors, you can simply focus on measuring from specific points, with no idea how the whole component or circuit board is operating unless using a multiple sensor system.
With the FLIR ETS320 thermal imager, you can visualise the entire section you want to test and hone in on specific temperature points. At a glance, you can tell which components are outputting excessive amounts of heat and then adjust your ETS320 as needed to measure specifically on that spot.
The FLIR ETS320 produces fully radiometric imagery – every individual pixel in the image displayed is assigned its own temperature reading, complete with exceptionally accurate results within ±3°C and high thermal sensitivity to spot even the most minor differences in temperature. Fully dynamic infrared radiometric video streaming can also be sent directly to a PC running FLIR Tools+ software (included as standard) for real-time analysis.
Reduce Testing Times and Improve Product Design
Using the FLIR ETS320, you’ll be amazed at the difference it can truly make to your electronic designs.
As it gives you the ability to visualise all of the board/component at once, you can see exactly where the inefficiencies lie, helping you to improve your product designs and produce more efficient electronics that are better for your company and your customers. It will also drastically reduce your testing time, ensuring you spend less time actually figuring out where to attach sensors and more time simply looking at where the problems are.
In educational environments, the ETS320 is ideal for teaching students not only about thermal properties and infrared radiation, but also as a means of explaining how components overheat, how to spot these problems and how to take action to improve upon components which may not be as efficient as possible.
The FLIR ETS320 thermal imaging system comes as standard with a microscope-style stand that gives you completely hands-free thermal analysis on your workbench.
With adjustable height for zooming in on components and quick, easy setup, the ETS320 will have you viewing your components in thermal in no time.
The viewing screen is built directly into the side of the ETS320, making viewing as comfortable as possible. A crisp 3” LCD allows you to view your findings seamlessly in real time, or you can – at the touch of a button – quickly capture a thermal image or stream video directly to a PC.
About FLIR
FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. We bring innovative sensing solutions into daily life through our thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. Our products improve the way people interact with the world around them, enhance public safety and well-being, increase energy efficiency, and enable healthy and entertained communities.
| Key Features | Sprectral Range 7.5–13 µm, 320 x 240 pixels, Touch Screen, Switch Between °F and °C | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | FLIR | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA