FLIR CM275 Thermal Imaging Clamp Meter
- Batteries Supplied
- Case Included
- Thermal Range -10 °C to +150 °C
- 160 x 120 pixels
- Three Selectable Colour Palettes
- Switch Between °F and °C
- Auto Off
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
FLIR CM275 Thermal Imaging Clamp Meter
The FLIR CM275 Thermal Imaging Clamp Meter combines accurate measurement of electrical parameters with FLIR’s state-of-the-art thermal imaging technology. It can measure AC/DC current up to 600A via its 35mm jaw whilst the meter can also perform contact measurement of voltage (1000V), resistance (6kΩ), and capacitance (1000µF). Other functions include diode testing and inrush current measurement for assessing the start-up phases of motors. VFD mode is perfect for motor drives and true RMS measurement makes AC parameters more accurate.
In addition to its advanced measurement functions, the FLIR CM275 has a 160 x 120 pixel thermal sensor which measures surface temperature from -10˚C to 150˚C with ±3˚C or 3% accuracy. The 150mK thermal sensitivity means that temperature differences of just 0.15˚C can be depicted on screen across a 50˚ x 38˚ field of view. A laser pointer helps the user direct the camera and there is the choice of iron, rainbow and greyscale palettes.
It is easy to select the function on the FLIR CM275 using the simple dial. Other buttons allow ranging, fine adjustments and different measuring modes such as min/max recording and data hold. Results and thermal images are shown on the 2.4” screen and both readings and images can be saved to clamp meter’s internal memory. Files can then be wirelessly transferred via Bluetooth® to the user’s smartphone using the FLIR Tools or FLIR InSite apps.
The practical design of the FLIR CM275 makes it suitable for working in tricky or cramped conditions. The integrated torch illuminates the area in dark cabinets and the slimline clamp jaws can fit into awkward cavities. It is drop tested to 2m and is safety rated as Cat III 1000V / Cat IV 600V. The clamp meter benefits from a ten-year manufacturer’s warranty.
The CM275 Comes Supplied With:
- FLIR CM275 Thermal Imaging Clamp Meter
- 3 x AA batteries
- Premium Cat IV silicone test leads
- Quick start guide
- Instruction manual for FLIR CM275
Key Features:
- Thermal imaging allows you to quickly scan for overheating system components, then use the test functions to troubleshoot and diagnose the fault
- Scan entire targets for electrical issues with 160 × 120 thermal resolution
- Use advanced electrical features including VFD mode, true RMS, and LoZ
- Wirelessly connect to the FLIR InSITE professional workflow management tool to streamline inspections and simplify data collection, sharing, and reporting
- Store electrical measurements and thermal images internally, for later review
- Thermal imaging capability helps spot overheating components in circuitry
- Measure AC/DC current, AC/DC voltage, resistance and capacitance
FLIR Comparison Table
| CM275 | CM174 | CM74 | CM72 | |
| IGM Resolution | 19,200 Pixels | 4800 Pixels | N/A | N/A |
| Display Counts/Type | 6000/2.4" Colour TFT | 6000/2" Colour TFT | 6000/Backlit LCD | 6000/Backlit LCD |
| Jaw Opening | 1.38 in. | 1.38 in. | 1.38 in. | 1.38 in. |
| AC/DC Voltage | 1000 V | 1000 V | 1000 V | 600 V |
| AC/DC Current | 600 A | 600 A | 600 A | 600 A |
| VFD | Yes | Yes | Yes | N/A |
| LoZ | Yes | Yes | Yes | Yes |
| Resistance | 6.00kΩ | 6.00kΩ | 6.00kΩ | 6.00kΩ |
| Data Storage | 10 Files (40K Readings) , 100 Images |
N/A | N/A | N/A |
About FLIR
FLIR Systems - The World's Sixth Sense
FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. We bring innovative sensing solutions into daily life through our thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. Our products improve the way people interact with the world around them, enhance public safety and well-being, increase energy efficiency, and enable healthy and entertained communities.
| Key Features | Batteries Supplied, Case Included, Thermal Range -10 °C to +150 °C, 160 x 120 pixels, Three Selectable Colour Palettes, Switch Between °F and °C, Auto Off | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||
| Manufacturer | FLIR | ||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA