Emlite EML-P £1 £2 Prepayment Coin Meter
- Accepts the NEW £1 Coin
- Coin Meter
- Compact Modern Design
- Economy 7 Compatible
- OFGEM Approved
- Prepayment Function
- Single Phase 100A Rated
- Standing Charge Feature
-
-
Information on calibration of newly purchased equipment and what it means to you.
Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.FREE personalised traceable calibration certificate
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.Where offered this can be identified by the logo below:
-
-
Emlite EML-P £1 £2 Coin Meter (Prepayment Version)
The Emlite coin prepayment meter provides a compact and easy to use solution for many prepaid metering applications. Fully approved in accordance with the Measuring Instruments Directive (MID), this highly functional meter may be used for resale of electricity or services.
This meter accepts the current £2 coin and the NEW £1 coin.
IMPORTANT
This version of the EML timeclock is to deliver an electrical supply upon pre-payment for the duration of the
units of electricity paid for, this would generally be the best option for landlords to supply a tennant's general electricity
for a whole residence.
If you are a landlord or property owner looking to install a meter that charges the tennant for a unit quantity of electricity used
then this is likely the meter you are looking for.
For a meter that supplies electricity for a timed duration only please see part number EML-T. Typical exaples of this would be
for showers, washers or dryers.
Key Features:
- Fully MID approved
- Prepayment mode operation
- Easy-to-read LCD Display
- Dual Tariff
- Two Coin values accepted (Multiple Currency and Token options)
- Coin rejection chute.
- Push Button programing
- 100 Amp rated.
- Economy 7 operation (2 rates)
- Standing Charge and Debt collection features.
Ideal for landlords, housing associating and holiday lets this fully new coin prepayment meter is one of the worlds most compact and easy to use.
Being MID approved this new meter meets all relevant OFGEM and EU legislation in relation to the resale of electricity.
In electricity prepayment mode the meter provides options for one or two tariff operation, separately programmable standing charge and debt collection facilities.
A fully electronic validator is used for coin acceptance ensuring no loss of revenue through the use of foreign or fake coins. The validator can also be factory programmed for use with various tokens where a higher risk of theft is present.
High quality solid brass cable terminals are used allowing 100 Amp operation and to aid electrical installation.
Key Features | Accepts the NEW £1 Coin, Coin Meter, Compact Modern Design, Economy 7 Compatible, OFGEM Approved, Prepayment Function, Single Phase 100A Rated, Standing Charge Feature | ||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||
Manufacturer | Emlite | ||||||||||||||||||||||||||||||||||||||||||||||||
Short Description |
Updated May 2022
Please note, our cut-off time is now 2:00pm
|
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA