- Features & Specification
CScope MXT4 Signal Generator
Designed for use with a MXL4 Precision Pipe & Cable Locator
The C.Scope MXT4 Transmitter is designed for use alongside an MXL4 Locator. It enables a far more flexible approach to pipe and cable location enabling the operator to accurately detect, pinpoint, trace and identify the widest range of pipes and cables.
The MXT4 Transmitter now has a greater range of transmitting frequencies allowing improved long distance tracing and utility identification, even on the most congested of sites. A range of frequencies from 512/640Hz up to 131kHz and including the simultaneous dual-frequency 33kHz and 131kHz signal output is ideal for maximising the number of buried services that can be energised and then detected. The MXL4 can apply these frequency signals without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.
- One Watt 4-level adjustable Power Output
- Six Signal Outputs:
- Pulsed or Continuous Output Signal
- Three Signal Application Techniques:
Direct Connection / Wraparound / Induction
- Automatic Daily Self Test
- Data Logging of all Transmitter activity
- Data Transfer by USB
- High resolution Liquid Crystal Display
- No periodic Calibration required
- Product Validation Certificate available
- In-built Accessory Tray
Three Signal Application Techniques
The MXT4 offers three alternative ways to apply a Signal Generator signal:
Direct Connection allows specific pipes or cables to be individually traced, identified and their depths measured. The use of Signal Clamps, Signal Injectors and Direct Connection leads make this mode the most effective method for pinpointing pipes and cables.
If it is difficult or inconvenient to use Direct Connection, then the Wraparound technique can be utilised to successfully energise a street or car park lighting cable.
Induction allows the Signal Generator to induce a detectable and traceable signal to previously unknown, undetected or inaccessible underground metal pipes or cables.
High Power Signal
The MXT4’s fully adjustable One Watt Power Output means that deeper pipes and cables can be effectively energised and then traced over ever longer distances.
It also features a FOUR position power level adjustment so the operator has total control of how much power is in use and when.
Pulsed/Continuous Signal Output
A Pulsed or Continuous signal output allows operators to switch to the Pulsed Mode at the push of a button in high interference situations and keep on tracing. The MXT4 has a clear audible signal output to indicate when it is in operation.
A useful in-built audio mute control is also included.
To compliment and support in-built data logging on the MXL4 Locator, the MXT4 Transmitter also has full data logging capability. A years worth of data can be stored, in normal usage, on both the Locator and Transmitter. This can be conveniently transferred at any time via a USB cable to a PC for analysis.
The MXT4 Transmitters do not require periodic recalibration. A fully Automatic Daily Self Test (ADST) tests and confirms that they are functioning at their optimum level each day.
Automatic Daily Self Test (ADST)
The MXT4 Transmitters perform a comprehensive Automatic Daily Self Test (ADST).
At the start of each day of use, a positive Automatic Daily Self Test result gives confirmation to the operator that the kit is working at the optimum level.
The result of this test is recorded and stored on memory within the products in-built data files and can be downloaded onto a PC at any time within the following 12 months*.
Product Validation Certification
These test results can be used to produce a Product Validation Certificate using the C.Scope PC Toolkit. In addition, any results of the Self Test that have been carried out in the last twelve months* are available. The PC Toolkit can also be used to view and print a copy of the original factory Calibration Certificate.
C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal requirements.
High Resolution Backlit Digital Display
The MXT4 has a large, clear and easy to read backlit LCD mounted behind a protective polycarbonate lens. The display indicates frequency and functions selected, power level, connection quality and battery condition. It also displays the Automatic Daily Self Test results.
Robust and Durable Construction
The MXT4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.
The MXT4 Transmitter has a large detachable accessory tray as its base. It can house not only the standard accessories (Direct Connection Leads, Earth Stake, Connection Magnets, 10m Auxiliary Earth Lead) and the Instruction Manual but also many of the optional extras such as Signal Clamps, Sondes and Signal Injectors.
Three Year Warranty
The MXT4 comes with a three year Warranty (conditions apply).
Which CScope Signal Generator is Right for You?
|SIGNAL GENERATOR/TRANSMITTER FEATURES||SGA4||SGV4||MXT4|
|One Watt Power||•||•||•|
|Generator / Transmitter Frequencies||•||•||•|
|– 33+131kHz||Connected at 33+131kHz
Induced at 33kHz only
|Connected and Induced||Connected and Induced|
|– 131kHz||–||–||Connected and Induced|
|– 33kHz||–||–||Connected and Induced|
|– 8kHz||–||–||Connected and Induced|
|Pulsed / Continuous Output Signal||•||•||•|
|Signal Connection Modes||•||•||•|
|– Direct Connection||•||•||•|
|Automatic Daily Self Test||–||•||•|
|Data Transfer via USB||–||•||•|
|High Resolution Backlit Liquid Crystal Display||–||•||•|
|No Periodic Calibration1||•||•||•|
|Three Year Warranty2||•||•||•|
|Batteries3 4 x D (LR20)
Alkaline or NiMH Rechargeable
|In-Build Accessory Tray4||•||•||•|
All operation is by push button control as follows:
- Power Level: Cycles through four available power levels
- Frequency: cycles through six available output frequencies
- Pulse/Continuous Output: toggles between pulse or continuous output using one push button
- Audio Output: toggles between loud, muted and silent audio output using one push button
- Audio Feedback on button push
- Audio pitch drops with increasing load current in Connected Mode
- Audio pitch changes with power level in Induced Mode
- Audio output pulses to indicate Pulsed Mode
- Low battery indicated by interrupted Audio and output signal
Multi-segment Liquid Crystal Display indicating:
- Output Frequency
- Pulse Mode
- Continuous Mode
- Battery Condition
- Output Level (bargraph)
- Speaker Mute
- Self Test Result
Standard USB Mini B connector. USB 2.0 Compatible
Automatic Daily Self Test and manual Self Test function
- Induced = 131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz and 8,192Hz
- Connected = 131,072Hz and 32,768Hz; 131,072Hz, 32,768Hz; 8,192Hz; 640 and 512Hz
- Carrier Pulse Frequency: 7.5Hz (pulsed mode)
- Connection Mode automatically selected when lead is plugged into socket
- Maximum Output Voltage (open circuit): 30V rms
- Maximum Output Current (short circuit): 65mA rms
- Maximum Power: 1W into 400Ω load
- Case moulded from high impact plastic.
- Designed to withstand 1m (3’3”) drop onto a hard surface
- Incorporates clip on accessory storage compartment
Weight (including batteries, Connection Leads and Earth Stake)
3.4kg (7 lb 7 oz)
Dimensions (with Accessory Tray fitted)
360mm x 180mm x 230mm (14.1” x 7” x 9”)
Internal 4 x ‘D’ (LR20) cells (either alkaline non-rechargeable or NiMH rechargeable)
up to 40 hours intermittent use at 20ºC (68ºF) using alkaline cells
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Transmitters are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/53/EU (EMC). Compliance has been demonstrated by testing representative samples to the harmonised standards EN300-330 and EN301-489. The essential radio test suites have been carried out and the equipment is in conformity with all applicable directives. All C.Scope Transmitters comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).
|One Watt Power||•|
|Four Power Levels||•|
|– 33+131kHz (Connected and Induced)||•|
|– 131kHz (Connected and Induced)||•|
|– 33kHz (Connected and Induced)||•|
|– 8kHz (Connected and Induced)||•|
|– 512Hz (Connected)||•|
|– 640Hz (Connected)||•|
|Pulsed / Continuous Output Signal||•|
|Signal Connection Modes||•|
|– Direct Connection||•|
|Automatic Daily Self Test||•|
|Data Transfer via USB||•|
|High Resolution Backlit Liquid Crystal Display||•|
|No Periodic Calibration*||•|
|Three Year Warranty**||•|
|Batteries*** 4 x D (LR20) Alkaline or NiMH Rechargeable||•|
|In-Built Accessory Tray****||•|
* No Periodic Calibration. The MXT4 does not require periodic recalibration. A Product Validation Certificate can be printed using the PC Toolkit. C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal regulations.
** Three Year warranty. Conditions apply.
*** Batteries. 4 x D LR20 Alkaline or NiMH Rechargeable batteries housed in a secure battery compartment.
**** In-Built Accessory Tray includes Direct Connection Lead, Auxiliary 10m Earth Lead, Connection Magnets, Earth Stake and Instruction Manual.
Orders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.
Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Temporarily revised June 2020)
Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.
Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B
Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.
Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.
Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.
Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at firstname.lastname@example.org
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA