Comark C48 Legionella Kit STD Cert 5077346
- BioCote® Casing
- Complete With Probes
- Countdown Timer
- Includes thermometer
- probes
- wipes and case
- Inhibit the growth of Legionella bacteria
- Range -200°C to +1372°C / -328°F to +2502°F
- Type K Connection
- Manufacturer Certificate Included
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Comark C48 Legionella Kit STD Cert 5077346
The updated version of the popular C28 Legionella kit comes with FREE manufacturers calibration in either standard traceable or *UKAS variations.
*Important Calibration Information:
This instrument comes complete with the manufacturers calibration certificate. Please be aware that these certificates are generic and may also be time lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.
*The CL48LKIT UKAS version offered at the checkout will incure an additional lead time of +/- 10 days, this is manufacturers calibration only available directly from Comark.
The C48 Legionella Kit (STD Cert) contains a C48C Industrial Thermometer, which is supplied with a free Traceable Certificate. There are three robust probes to provide options for air, penetration* and surface of temperature measurement. Use the probe wipes supplied to wipe the probe shaft between measurements to avoid the risk of cross-contamination.
- Inhibit the growth of Legionella bacteria
- Includes thermometer, probes, wipes and case
- Traceable certificate also included
- Warranty: Please refer to individual components
- *Probe that Traceable Certificate refers to
The C48 Legionella Kit (STD Cert) is designed to help you manage the risk of Legionnaires Disease.
Given the right conditions, Legionella bacteria can grow in any workplace. If you manage any of the water systems described in the Health and Safety Commission’s L8 Regulations, part of your risk assessment will include a temperature monitoring regime to ensure any out of range temperatures are immediately rectified.
If you have responsibility for management of water systems at your facility, a Comark Instruments C48 Legionella Kit will make that job easier. The C48 Legionella Kit (STD Cert) is ideal for testing water towers and water systems in businesses, schools, dental practices, residential homes and other institutions where there could be high risk areas.
The kit contains a C48C Thermometer, which is supplied with a Free UKAS Certificate of Calibration. There are three robust probes to provide options for air, penetration and surface of temperature measurement. Use the probe wipes supplied to wipe the probe shaft between measurements to avoid the risk of cross-contamination.
Kit Contents:
The C48C Industrial Thermometer is a simple to use, industrial thermometer with Type K Thermocouple for reliable and accurate temperature measurement. It has an easy to use keypad and large LCD display.
The Pro1 Probe is Type K Probe fitted with a 2-Pin Sub-Miniature connector, to provide a quick and easy connection to your device.
The SK21M General Purpose Fast Response Probe is a Type K Thermocouple Surface Probe, fitted with a 1m curly cable.
The AK28M Flexible Wire Air Probe is a Type K Thermocouple Air Probe, with a total length of 1m.
The PW70T Thermometer Probe Wipes (70 Pack) is a pack of 70 probe & surface disinfectant wipes supplied in a small portable dispenser.
The MC28 Blue Medium Size Case is a hard carrying case specifically designed to take one thermometer and a range of probes.
Free Traceable Certificate at the standard points of 5°C and 70°C.
The case of the C48 Thermometer is rated to IP65/IP67 dust and waterproof standards and Comark also uses BioCote Antimicrobial Protection, the only antimicrobial solution to be awarded HACCP International Certification, to provide an important extra level of defence against cross-contamination. This product is also NSF Certified.
About Comark - A Fluke Company
Comark Instruments has over 50 years experience as a leading, international manufacturer of high quality, precision thermometers, data loggers and wireless monitoring solutions, supplying over one million instruments per annum.
Formed in 1961, Comark manufactured the first of many of its electronic measuring instruments in 1963. The Company rapidly expanded and has seen some revolutionary instruments being developed.
Our Mission is to be the number one choice in the food industry through product excellence and outstanding customer care. As experts in temperature, we provide products and monitoring solutions to the food industry that aid compliance with HACCP regulations and due diligence procedures, helping to improve product safety to customers, eliminate risk and reduce cost in the supply chain.
| Key Features | BioCote® Casing, Complete With Probes, Countdown Timer, Includes thermometer, probes, wipes and case, Inhibit the growth of Legionella bacteria, Range -200°C to +1372°C / -328°F to +2502°F, Type K Connection, Manufacturer Certificate Included | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||
| Manufacturer | Comark | ||||||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA
