Chauvin Arnoux F65 Leakage Clamp Multimeter P01120761
- 28mm jaw size
- 300V CATIII
- Current: 30 µA to 100 A AC
- Resolution: 10 µA
- High immunity to eddy currents: 70 dB
- AC/DC voltage: 0.1 V to 600 V
- Audible continuity: < 35 Ω
- Max
- Relative
- display memorization
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Chauvin Arnoux F65 Leakage Clamp Multimeter P01120761
For rapid testing of leakage currents and isolation faults on live installations!
Please see the recently published article in Professional Electrician published April 2022. Advertising the Chauvin Arnoux F65 Earth Leakage Clamp which is equivalent to the Megger DCM305E, The full article can be found on this link: https://issuu.com/hamervillemediagroup/docs/pe_april_2022/36
The article details how important it is that the instrument used to measure earth leakage has a wide enough bandwidth
to take into account harmonics.
F65 Leakage Clamp Comes Supplied With:
- Set of elbowed male banana/ straight male banana leads.
- 1 set of test probes
- 2 x 1.5 V AAA/LR3 batteries
- 1 bag
- 1 operating manual in 5 languages.
Key Features:
- Analysis of RCD trigger currents
- Earth leakage currents
- Unbalanced phase currents
- High immunity to currents of adjacent conductors
- Anti-harmonic filter selection for enhanced fault detection on disturbed systems
- 3-year warranty
- Measurements compatible with the VDE 0404-4,
- VDE 0413-13 and IEC 61557-13 standards
Rapid testing for leakage currents.
Your installation and its users may be endangered through isolation faults and untimely
RCD tripping. Such phenomena are often caused by leakage currents
that prove difficult to detect.
For testing and maintenance professionals in the industrial and tertiary sectors
faced with this challenge, F65 pocket-sized clamps are the recognized solution,
while providing the full range of functions proposed by conventional clamp multimeters.
Detection of leakage currents and isolation faults.
Offering an exceptional resolution of 10 µA and high immunity (70 dB) to eddy currents, the F65 clamp is especially suited to the measurement of leakage currents that trigger RCDs, causing imbalances between phase-phase and phase earth currents. The harmonic filter facilitates the detection of faults on disturbed systems and power circuits
(switched power supplies, variable speed drives, inverters, etc).
Detection of isolation faults on live installations!
All-purpose clamp multimeters, F65 pocket-sized clamps provide the full range of functions proposed by conventional clamp-on multimeters: current up to 100 A, AC/DC voltage, frequency, resistance, and audible continuity.
isswww and Chauvin Arnoux
The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.
ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.
| Key Features | 28mm jaw size, 300V CATIII, Current: 30 µA to 100 A AC, Resolution: 10 µA, High immunity to eddy currents: 70 dB, AC/DC voltage: 0.1 V to 600 V, Audible continuity: < 35 Ω, Max, Relative, display memorization |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Chauvin Arnoux |
| Short Description | Chauvin Arnoux F65 Technical Specifications:
|
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA