Chauvin Arnoux F407 TRMS Harmonic Clamp Meter P01120947
- 60mm Jaw Size
- Bluetooth Connectivity
- Measures Harmonics
- Tests up to 1000A
- Current AC/DC
- TRMS
- Data Hold
- Backlit LCD Screen
- Backlit LCD Screen
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Chauvin Arnoux F407 Harmonic Clamp Meter
The F407 clamp is ideal for low-voltage, medium-power systems in LV electricity production and distribution, industry, railways, etc. It is also suitable for lift/elevator technicians and other lifting and transport equipment specialists. Maintenance, testing, monitoring, diagnostics, and connection are the main applications for the clamps in this series.
Equipped with a fast 12-bit TRMS digital acquisition system, F407 clamps offer particularly accurate measurements. Due to their large bandwidth and high crest factor, these clamps guarantee accurate measurements whatever the type of signal. Automatic AC/DC detection is a standard feature on all the models in this range, as is IP54 protection. The large backlit 10,000-count display makes it easy to read in all circumstances. The fact that each rotary-switch position corresponds to a single function means that it is simple to use.
Chauvin Arnoux F407 Comes Supplied With:
- 1 Set of Red/Black Banana/Banana Leads
- 1 Set of Red/ Black Crocodile Clips
- 1 Set of Red/Black Test Probes
- PC Communication Software
- 1 Multilingual Operating Manual.
Key Features:
- Current: 1,000 AAC / 1,500 ADC
- AC and DC voltage up to 1,000 V
- Power values: W / VA / var, PF & DPF
- THD-f & THD-r
- Harmonics up to 25th order
- Resistance and audible continuity
- Analysis of Min, Max, and Peak± on all functions
- TrueInrush current measurement
- Data recording
- Bluetooth interface and PC software
- AC and DC measurements
- Measurements of power and energy values
- Decomposition of harmonic orders
- Measurement recorder
Android Application for F407-F607
We have an Android application available for the F407 and F607 power and harmonics clamps
A remote screen and keyboard from the clamp can then be displayed on your smartphone or tablet.
You can then:
- view the measurements in real-time,
- recover the files of recordings stored in the memory,
- export them in ICP, Excel, or CSV format,
- View the trend curves on the screen.
We have added a new function to the clamps:
- recording of several parameters simultaneously in real-time (AC and DC, etc.),
- real-time viewing of all the harmonics at the same time.
To download the application, click on the link below and refer to the "read-me first.txt" file included.
This application is compatible with
- Firmware >or= V2.06
- Android >or= V4.1
DataView Suite
DataView is a powerful tool for the configuration, transfer, and processing of measurement data for an extensive range of Chauvin Arnoux measuring instruments. The DataView Suite groups the DataView report editor and the PEL Transfer, PAT, GTT, ICT, DTR, SLII, and MOT application software.
DataView v3.15.0013
Compatible instruments:
- PEL 102, PEL 103 and PEL 105 power and energy loggers;
- F407 and F607 power and harmonics clamps;
- C.A 8220 and 8230 single-phase power analysers;
- Qualistar C.A 8331,8332, 8333,8334, 8335 and 8336 three-phase power analysers;
- C.A 6543, 6547, 6549, 6550 and 6555 megohmmeters;
- C.A 6240, 6250 and 6292 micro-ohmmeters;
- C.A 6470N, 6471 and 6472 earth testers;
- DTR 8510 ratiometer for transformers;
- Simple Logger II and L452;
- C.A 6116, 6116N, and 6117 electrical installation testers.
Languages
DataView is available in the following languages: German, English, Chinese, Spanish, French, Italian, Dutch, Polish, Swedish, Czech and Turkish.
See Also:
Chauvin Arnoux has published an in-depth article called 'Uncovering the truth about inrush Currents' which can be viewed here.
isswww and Chauvin Arnoux
The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with the design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.
ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.
| Key Features | 60mm Jaw Size, Bluetooth Connectivity, Measures Harmonics, Tests up to 1000A, Current AC/DC, TRMS, Data Hold, Backlit LCD Screen |
|---|---|
| Manufacturer | Chauvin Arnoux |
| Short Description |
|
| Product Stock Status | Next Day Delivery (subject to availability) |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA