Chauvin Arnoux CA6011 Earth Continuity Tester P01299926
- Measure Earth Resistance
- Versatile test modes
- Backlit Display
- One Button Operation
- Test Leads Included
- Continuity Measurement Range 0.00 Ω to 2.00 Ω - 2.00 Ω to 20.00 Ω
- Resistance Measurement Range 1.0 Ω to 200.0 Ω
- Compliance IEC 61557-1 & IEC 61557-4 IEC 61010-1
- IEC 61010-2-030 300 V CAT IV
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Chauvin Arnoux CA6011 Earth Continuity Tester P01299926
The innovative CA6011 combines an audible and visually identifying earth tester with an integrated cable reel, making it the last earth tester you'll ever need.
| As featured in the February 2022 edition of Professional Electrician & Installer magazine. You can view the online article here. |
 |
The CA 6011 continuity tester has been specially designed for periodic testing of the protective earth conductors of electrical equipment, appliances and installations, linked in particular to the standards and regulations: IEC/EN 60364, NF C 15-100, VDE 100, etc.
These systematic, repetitive tests represent more than 80% of testing operations. Particular care must therefore be taken to prevent them from becoming tiresome.
In the context of electrical installation safety, the different local legal frameworks impose
a series of regular, systematic tests: earth test, insulation test, RCD test, etc.
Among these tests, the most repetitive (more than 80 % of operations) is systematic
testing of the continuity of the protective earth conductors.
Due to its ergonomics and functions, the CA 6011 continuity tester with built-in reeling box fulfils this requirement by making it comfortable to use for the operator while ensuring peace of mind for our customers.
Safety and Conformity
- Automatic polarity reversal
- Like all Chauvin Arnoux products, the CA 6011 has been designed to keep people safe, with visual and audible alerts.
- IEC 61010, 300 V CAT IV
- IEC 61557-4
For Multiple Applications
- Perform systematic earth connection testing on the conducting parts of the equipment and installation
- Check the earth conductor of a lightning arrestor
- Check the meshing and earth connection of a Faraday cage
- Check the floorplans and equipotentiality
CA6011 Continuity Tester KIT Comes Supplied With:
- Continuity Tester Control Box
- Encased cable reel 30m
- Leads and Probes
- Velcro Wrist Strap
- Flying Earth Lead with Clip
- Shoulder Strap
- Batteries
- Safety Data Sheet
- Quick-start Guide
- User Manual
- Verification Certificate
Key Features:
- Large backlit display (the largest on the market)
- Clear, intuitive indications: blue/red screen, simple symbols, audible alarm
- Brand new function: a vibrator! which respects your customers' peace and quiet while resting your neck
- Measuring unit which can be attached to the reeling box or detached as you choose!
- 4 buttons on the front panel to access all the functions directly
- Long battery life: up to 30,000 measurements!
- Weight ideally distributed across the body thanks to the shoulder strap and belt
Technical Specifications:
- Measurement compliant with the IEC 61557-4 standard!:
- Continuity measurement: 0.00 Ω to 20.00 Ω
- Automatic polarity reversal
- Measurement current: 200 mA
- Compensation of the resistance of the measuring leads
- Resistance measurement: up to 200.0 Ω
- Programmable conformity threshold <1Ω or <2Ω
- Reeling box with 30 m cable
- Elastic strap for use attached to your wrist
- Battery life up to 30,000 measurements.
Comfortable Use
Tester unit which can be assembled or separated, as preferred
Shoulder strap and belt for excellent distribution of the weight, allowing intensive use
Elastic strap on the back of the unit to wear it on your wrist
Spares and Accessories
Continuity rod (as pictured below) P01102084A
Please select as an additional purchase from the drop-down menu above.
ISSWWW and Chauvin Arnoux
The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.
ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.
| Key Features | Measure Earth Resistance, Versatile test modes , Backlit Display, One Button Operation, Test Leads Included, Continuity Measurement Range 0.00 Ω to 2.00 Ω - 2.00 Ω to 20.00 Ω, Resistance Measurement Range 1.0 Ω to 200.0 Ω, Compliance IEC 61557-1 & IEC 61557-4 IEC 61010-1, IEC 61010-2-030 300 V CAT IV |
|---|---|
| Manufacturer | Chauvin Arnoux |
| Short Description | Display 2,000 counts with two-colour backlighting |
| Product Stock Status | Next Day Delivery (subject to availability) |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA
-
This Item:
£322.80 £269.00
-
Kewtech PATLOG1
£15.54 £12.95
