Chauvin Arnoux CA1950 DIACAM 2 Thermal Imaging Camera
- 80 x 80 UFPA microbolometer
- Adjustable emissivity
- Automatic parallax compensation
- Range 20°C to 250°C
- Supports >32GB Micro SD
- Tripod Mountable
- auto / manual
- 80 x 80 pixels
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Chauvin Arnoux CA1950 DIACAM 2 Thermal Imaging Camera
The CA1950 makes it very simple to perform your thermal inspections for your energy audit and ensures trouble-free industrial, electrical, or mechanical maintenance.
CA1950 Comes Supplied With:
- Site-proof case
- 4 NiMH batteries
- 1 battery charger
- 1 micro SD HD card
- 1 USB cable
- 1 Bluetooth earpiece
- CAmReport software on CD-ROM
- User’s manuals
- Measurement report
Key Features:
- 2 LCD screens: current intensity and potential
- Simultaneous display of the current intensity and the potential
- Possibility of manual adjustment of the potential
- Compact and simple to use
- Analogue output compatible with Computer-Assisted Experimentation software
- Maximum potential indicator
- Switches for current range (µA/mA) and potential range (-mV/+mV)
- 2 ranges: 2, µA and/or 2 mA
- Plotting of current/potential graphs
- Powered via the mains (delivered with 9 V power supply)
Designed and developed for simplified use, it is ideal for all applications in the building,electrical maintenance and mechanical maintenance sector:
- Thermal audits
- Fault detection: thermal bridges, infiltrations, presence of humidity
- Electrical maintenance: detection of faulty contacts, unbalance, etc.
- Mechanical maintenance: detection of wear points, motor overheating, lubrication problems, etc.
It has been specially designed for simplified use:
- Comfortable grip with direct access to the functions with just one hand
- The CA 1950 is perfectly balanced so that it does not move even when stood on a benchtop.
- The display uses a wide 2.8-inch screen with automatic brightness adjustment.
- The field of view (20°x20°) is equipped with a focus-free function which ensures that the image remains sharp whatever the distance.
- Contextual help guides users to limit the risk of error.
- The CA 1950 can be used to record voice comments directly on the image.
- The flap protecting the lens is built into the instrument, so it does not get in the way and cannot be lost
The CA 1950 is a communicating camera which can recover the necessary measurements (current, etc.) from current clamps and multimeters via Bluetooth.
Software
CAmReport, the software for analysing the thermograms, can be used for close analysis with the help of several tools:
- Cursors (automatic display of the temperature at the point chosen)
- Thermal profile (automatic display of Min/Max/Avg temperatures of the line)
- A square or circle for area analysis
- Results tables automatically and quickly show all the information/analytical tools on the thermogram
- Polygons and polylines for analysing certain areas of the thermogram more precisely
- Emissivity table supplied as standard which can be enhanced by the user
CAmReport can also be used to generate reports automatically based on various different templates provided. These reports can be exported in Word or pdf format. This makes it easier to print and archive them.
Other specifications:
- 80 x 80 UFPA microbolometer-type detector, 8 ~14 μm
- IFOV (spatial resolution) 4.4 mrad
- temperature range 20°C to 250°C
- display mode: thermal image, real image with automatic parallax compensation. Image merging available with PC software
- measuring tools: 1 manual cursor+ 1 automatic detection + Min Max on adjustable area + Temperature profile + Isotherm
- adjustable parameters: emissivity, environmental temperature, distance, relative humidity
- 2 GB (approx. 4,000 images) on micro SD card, up to 32 GB with removable card
- ingress protection: IP 54
- weight/dimensions: 700 g with rechargeable batteries / 225x125x83
isswww and Chauvin Arnoux
The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with the design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.
ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.
| Key Features | 80 x 80 UFPA microbolometer, Adjustable emissivity, Automatic parallax compensation, Range 20°C to 250°C, Supports >32GB Micro SD, Tripod Mountable, auto / manual, 80 x 80 pixels | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Chauvin Arnoux | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA