Extech EX840 1000A AC/DC True RMS Clamp/DMM plus IR Thermometer
- 43mm Jaw Size
- TRMS
- Continuity Measurement
- Data Hold Function
- Diode Testing
- Auto Power Off
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Extech EX840 1000A AC/DC True RMS Clamp/DMM plus IR Thermometer
An industrial-grade testing device, the EX840 is suitable for use in complex testing environments and gives users a quick and easy way to test various different parameters.
When used as a clamp meter the EX840 is capable of fitting around conductors up to 43mm (1.7") in size, allowing it to take measurements on conductors up to 750MCM or 2 x 500MCM. Once it's attached the device can then be used to measure AC or DC current across a large range from 0.1 to 1000A with a high basic accuracy of ±2.8%.
As well as clamp meter measurements the EX840 also comes with built-in multimeter capabilities and can measure AC/DC voltage from 0.1mV to 1000V, resistance from 0.1 to 40MΩ, capacitance from 0.001nF to 40000μF, frequency from 0.001kHz to 4kHz, type K temperature measurements from -4 to 1400°F (-20 to 760°C) and continuity, inrush and diode testing procedures.
The EX840 also comes with a built-in IR thermometer which allows this device to measure surface temperatures without the need to make contact with the surface. This includes a laser pointer for exactly defining the surface area to be tested, and when used this mode allows IR temperature measurements between a range of -58 to 518°F (-50 to 270°C).
This product is EN 61010-1 compliant and has CAT III 1000V and CAT IV 600V safety ratings.
The Extech EX840 Is Supplied With:
- Extech EX840 1000A Clamp Meter + IR Thermometer
- CAT IV Test Leads
- 9V Battery
- General Purpose Type K Probe
- Pouch Case
- Professional Test Lead Set
Key Features:
- Non-contact IR Temperature measurements with laser pointer
- True RMS Current and Voltage measurements
- Peak hold captures inrush currents and Transients
- Multimeter functions: AC/DC Voltage, Resistance, Capacitance, Frequency, Diode, and Continuity
- 1.7" (43mm) jaw opening for conductors up to 750MCM or two 500MCM
- 4000 count backlit display
- Data Hold and Min/Max, Auto Power off
- Complete with standard test leads, 9V battery, general purpose Type K probe, belt holster, and professional CAT III-1000V Test Leads
ISSWWW and Extech
ISSWWW is a trusted stockist of Extech products including LED Light Meters, Video Borescopes and Advanced Clamp Meters. With a reputation for innovative products, Extech’s products offer patented design with features, functions and reliability at an affordable price.
| Key Features | 43mm Jaw Size, TRMS, Continuity Measurement, Data Hold Function, Diode Testing, Auto Power Off | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Extech | |||||||||||||||||||||||||||||||||||||||||||||
| Short Description | Extech EX840 1000A AC/DC True RMS Clamp/DMM plus IR Thermometer
|
|||||||||||||||||||||||||||||||||||||||||||||
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA