TPI 343 Kit 3 Legionella Temp Kit
- -50˚C and 1350˚C
- Type K Connection
- Dual Input
- Long Battery Life
- Hold Function
- Min/Max Function
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
TPI 343/Kit3 Legionella Temp Kit
The TPI 343 Legionnaires’ Temperature Kit has everything needed to detect temperature conditions in water systems that may be conducive to legionella bacteria and pose an increased risk of Legionnaires’ disease.
The main instrument in the kit is the TPI 343 Dual Input Differential Thermometer which can display temperatures from two probes at once as well as the differential temperature between the two values. The thermometer itself has a measurement range of -50˚C to 1350˚C depending on the probe and also boasts min/max recording, data hold, a digital filter and an auto-calibration function.
A supplied FK11M immersion probe is a vital component of the TPI 343 Legionnaires’ Kit as it is ideal for checking temperatures in semi-solids and liquids. With a temperature range of -50˚C to 250˚C, it covers the risk zone for legionella bacteria and it has a 1m lead length for added practicality. The TPI 343 Legionnaires’ Kit also contains a CK11M surface temperature probe which is ideal for taking contact temperatures on water pipes. It is fully waterproof and has a temperature range of -50˚C to 250˚C.
Two GK11M beaded air probes provide an excellent option for measuring temperature in air vents and in the room for further safeguarding against legionella-friendly conditions. The thermometer and all probes are supplied in a handy soft carry case and a three-year warranty covers all the components. A battery life of 200 hours makes the kit suitable for use around large sites and it is an excellent, good value kit for testing for legionella-friendly conditions.
The TPI 343/Kit3 Is Supplied With:
- TPI 343 Dual Input Thermometer
- FK11M Immersion Probe
- CK11M Surface Probe
- 2x GK11M Air (Beaded) Probes
- A901 Soft Carry Case
Also available, the 343/Kit3 Plus
Comes supplied additionally with a TPI CK15M heavy-duty surface probe. With a standard K-type connector and a generous 14mm surface contact it's ideal for measuring a wide temperature range of -40˚C to 510˚C across flat even surfaces.
Key Features:
- Auto Field Calibrate in less than 10 seconds in ice water to achieve +/- 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
- Temp1, Temp2, Temp1-Temp2 display modes
- Min / Max Record
- Auto Resolution (0.1° / 1°)
- °C/°F Selectable
- Hold feature freezes reading on display
- Auto Off
- Protective rubber boot
- Easy to read LCD display
About TPI Europe
Since 1997, TPI has been striving to offer the latest technology at the most affordable price to technicians, contractors, engineers and others seeking value-based test and measurement instruments. Our mission is to become the leading independent manufacturer and supplier of low cost high-performance industrial instrumentation.
Headquartered in the heart of the “Silicon Forest” in Beaverton, Oregon, TPI combines innovation, performance, customer service and high-value in products which include: Vibration, Combustion, Pressure (manometers), Temperature, Combustible gas, Digital Multimeters, Clamp Meters, IAQ, specialty test and measurement instruments, and a wide range of accessories.
| Key Features | -50˚C and 1350˚C, Type K Connection, Dual Input, Long Battery Life, Hold Function, Min/Max Function | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||
| Manufacturer | TPI Test Products International | ||||||||||||||||||||||
| Short Description | TPI 343 Kit 3 Legionnaires Temp Kit
|
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA
-
This Item:
£128.34 £106.95
-
TPI CK21M Pipe Clamp Probe PAIR
£33.60 £28.00
