Megger DLRO100XB Datalogging Low Resistance Ohmmeters 1004-913
- 0.1 µΩ to 1.999 Ω
- 100A Testing
- CAT IV 600 VAC / 500 VDC
- Custom Test Sequences
- Mains/Battery Powered
- Smooth DC output for MCB testing
- Multiple operating modes
- Storage and download functions
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Megger DLRO100XB Digital Low Resistance Ohmmeter
A significant addition to the comprehensive range of Megger Low Resistance Ohmmeters, DLRO100 enables low resistance measurement, across multiple applications, in areas without access to mains power. The integral Li-Ion battery supplies a constant 100 A current for up to 200 Manual/Auto tests to enable enhanced productivity in remote locations. With a focus on user safety, advanced design features ensure the safe operation of the instrument in the most adverse conditions, including a CAT IV 600 VAC / 500 VDC safety rating in accordance with IEC61010. The rugged design, intuitive interface and IP54 (lid open) rating ensure reliability and ease of use in the most arduous of conditions.
There are three models in the series, all three models can be line powered, are rated CAT IV 600 V and can test currents from 10 to 110 A. B in the model name indicates the battery powered option (in addition to AC power).
- DLRO100 E or EB - The base model.
- DLRO100 X or XB - The mid-range model includes all features in the basic model, with added data storage and DualGround™ testing capability.
- DLRO100 H or HB - The top-of-the-line model includes features in the E and X models, with asset tagging (enter unique asset ID's using the DLRO100 Asset Tag Windows app), Bluetooth® download and USB remote operation.
Megger DLRO100XB Comes Supplied With:
- Certificate of Test
- Quick Start Guide
- Calibration Certificate
- CD Containing User Guide
- Mains Lead
- USB Cable
A lead set is NOT included with the instrument and must be ordered as an optional accessory.
Test Modes
The Manual test mode allows the user to initiate the test procedure once the probes are in contact with the object under test. Once the TEST button is depressed the TEST lamp will illuminate and the instrument will undertake a single test to verify the resistance of the test object.
In Auto mode the user selects the desired current, connects the current test leads and as soon as the potential leads are connected a test will start automatically. To repeat a test, simply break contact with the potential probes and remake contact.
In Continuous mode the user connects the test leads and presses the TEST button, initiating the test procedure. The instrument will continue to test, updating the display after each new test cycle, until the TEST button is pressed or the test procedure times out.
Key Features:
- CAT IV 600 VAC / 500 VDC for safe operation
- Lightweight 100 A battery powered unit for portability
- High noise immunity for stable readings
- Smooth DC Output for circuit breaker testing
- IP54 for protection against dust and moisture whilst testing
- Save, download and delete results
Typical Applications:
The need for accurate low resistance measurement is well known and very diverse.
Utilities & Service Contractors – commissioning new installations & regular maintenance testing of
- Switchgear and circuit breaker contact resistance
- Busbar and cable joints
- Wire and cable resistance
- Lightning conductor bondin
Original Equipment Manufacturer – detecting manufacturing defects
- Production test of circuit breakers – contacts & joints
- Production test of high voltage switchgear
- Production test of welded joints & connections
Transport – manufacturing & maintenance
- Railway rolling stock ground connections & manufactured joints
- Railway lines & conductor rails – commissioning & maintenance
- Aircraft frame bonds and static control circuits
| Which model is right for me? | |||||||
| DLRO100 | |||||||
| Featuress | E | EB | X | XB | H | HB | Benefits |
| CAT IV 600 VAC / 500 VDC up to 2000 m CAT IV 300 V up to 4000 m |
⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | On all test terminals for safe operation |
| Lightweight 100 A battery powered unit | ⚫ | ⚫ | ⚫ | Easily portable – 7.9 Kg (17 lbs) with battery | |||
| Mains only | ⚫ | ⚫ | ⚫ | Mains only units for manufacturing and production applications where AC is always available. Weight 7.0 Kg (15.5 lbs) | |||
| High noise immunity | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | For stable readings in noisy environments |
| Smooth DC Output | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | Circuit breaker testing |
| IP54 Lid open IP65 Lid closed |
⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | For protection against ingress during operation (lid open) and storage (lid closed) |
| Li-ion battery | ⚫ | ⚫ | ⚫ | Always ready to test with a Li-ion fast charge battery - 2.5 hours charge time from fully discharged Works from an AC supply if the battery is fully discharged Battery capacity - 200 single tests or up to 2x 10 minutes continuous 100 A output for extended use | |||
| 100A Manual, Auto and Continuous test | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | Quick selection of test modes for different applications with 4 terminal measurement for flexibility |
| Custom test | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | Adjustable current 10 - 110 A, ramp rates configurable from 0.5s upto 30s and configurable test duration for flexibility |
| Range and test mode rotary switches | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ |
⚫ | Quick and easy selection of current ranges and test modes |
| Ultra tough outer case construction | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | Designed for use in demanding environments with a flame retardant UL94 V0 inner case for safety |
| Dual Ground™ | ⚫* | ⚫* | ⚫* | ⚫* | Using the optional DC clamp enables circuit breaker testing with ground protection in place for safety | ||
| Large, clear LCD | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | ⚫ | Ideal for all light conditions, with backlight |
| Internal memory storage with USB download capability | ⚫ | ⚫ | ⚫ | ⚫ | For effective results management, up to 220 time and date stamped records | ||
| Remote Control | ⚫ | ⚫ | Control the instrument remotely over USB via a PC or laptop for added safety | ||||
| Asset tagging | ⚫ | ⚫ | Running a PowerDB app on Windows tablet or smart phone to populate unique asset IDs for efficient asset management | ||||
| Bluetooth® | ⚫ | ⚫ | For effective wireless communication. For download and asset tagging | ||||
* with optional Clamp All models. Two year warranty - second year conditional on free product registration.
Spares & Accessories (Not Supplied):
| DLRO100E Optional Accessories | |
| DLRO100 CAT IV 600V Lead Set (5m) | 1004-448 |
| DLRO100 CAT IV 600V Lead Set (10m) | 1004-449 |
| DLRO100 CAT IV 600V Lead Set (15m) | 1004-450 |
| DLRO100 Terminal adapters (x2) | 1005-555 |
| DLRO100 CAT IV 600 V Kelvin Lead Set (5m) | 1005-634 |
| DLRO100 CAT IV 600 V Kelvin Lead Set (10m) | 1005-635 |
| DLRO100 CAT IV 600 V Kelvin Lead Set (15m) | 1005-636 |
| DLRO100 DC Clamp (MCPD 100L) | 1005-622 |
| DLRO100 ISO17025 (UKAS) Calibration Certificate | 1005-888 |
| DLRO100 Lithium Ion Battery Pack | 1005-973 |
ISSWWW and Megger
The extensive Megger product portfolio provides electrical test equipment for an exceptionally wide range of applications at any point of the electricity network. From small handheld low voltage equipment such as multifunction installation testers through to high voltage asset test equipment like insulation resistance testers, circuit breaker analysers, protection relay test systems to transformer condition measurement devices.
Megger designs and manufactures portable electrical test equipment in factories located in Germany, Sweden, the UK, and USA. Megger products help you install, improve efficiency, reduce cost and extend the life of you or your customers’ electrical assets.
Established in the late 1800s, the company has been designing and making test and measurement instruments that perform electrical measurements for preventative maintenance, troubleshooting and commissioning for decades. Megger products have supported customers all over the world to improve their facilities’ efficiency, reduce costs, extend the life of apparatus and through trending and analysis, anticipate equipment failure and future performance.
Being a brand synonymous with the industry and a cornerstone pioneer of many of today’s everyday items of test equipment, ISSWWW are proud to bring you Megger’s full range of equipment and services, now and into the future.
| Key Features | 0.1 µΩ to 1.999 Ω, 100A Testing, CAT IV 600 VAC / 500 VDC, Custom Test Sequences, Mains/Battery Powered, Smooth DC output for MCB testing, Multiple operating modes, Storage and download functions | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Megger | |||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
Updated January 2024
Please note, our cut-off time is 2:00pmOrders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery. Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order. *UK Mainland (Revised March 2021)
Delivery SurchargesBecause of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
Offshore ServicesAll offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles. International deliveryInternational delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk ExportAll export inquiries should be directed to the export division before placement of order. If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
| |||||||||||||||||||||||||||||||||||||||||||||
