Testo 835-H1 4 point Infrared Thermometer 0560 8353
- 4 Point Laser
- 50:1 Optics
- Humidity Detection
- Range -30 to +600 °C
- Resolution 0.1 °C
- Type K Thermocouple Connection
- Windows® Software Available
- Data Logging
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Testo 835-H1 4 point Infrared Thermometer 0560 8353
Overview:
Perform temperature and moisture measurements on walls, monitor and check air conditioning and ventilation systems, service and inspect industrial systems, ensure that constantly high levels of quality in production processes are maintained: the testo 835-H1 is the ideal all-round device for a wide range of industrial and commercial applications.
Testo 835-H1 Comes Supplied With:
- Testo 835-H1 infrared thermometer plus moisture measuring function
- Moisture module
- Batteries
- Calibration protocol
Key Features:
-
Measure temperature, moisture and dew point with only one device
-
Calculate the surface moisture content
-
Easy and comfortable to use: easy-to-follow menu guide, can save up to 200 readings, data analysis with free-to-download software
-
Four-Point-Laser and 50:1 Optics for precise measurements even over long distances
What the testo 835-H1 infrared thermometer plus moisture measuring can do
- Measure the surface temperature and relative humidity and check the dew point and surface moisture
- Help to detect mold in buildings before it`s too late
- Carry out measurements on small, moving or hard-to-reach objects accurately and safely
Benefit from state-of-the-art technology and easy handling
- 4-Point-Laser: shows the exact measuring zone, effectively preventing wrong measurements
- 50:1 optics that provide you with excellent surface temperature measurements even over greater distances (distance 5 m = 10 cm measurement spot)
- Adjustable degree of emission for measuring a wide variety of different surfaces
- Connectivity for temperature sensors: for additional contact measurements for materials with low degree of emission possible - simply connect your optionally available temperature sensor
- Easy-to-use, easy-to-follow menu guide thanks to icons and joystick
- Generate measuring points and save up to 200 measurements
- Define individual alarm thresholds, acoustic and optical alarm
- Show min/max values
- Backlit display
Location of thermal bridges and mould formation
With the testo 835-H1, you can identify thermal bridges (places on walls, floors and ceilings where there is a greater outflow of heat than at points nearby, mainly due to structural defects) for early detection or identification of structural defects, energy loss and places where there is a risk of mould formation.
Advantages of the testo 835-H1:
- Fast detection of thermal bridges by scanning the walls, even at great distances
- Measurement of the dewpoint, dewpoint distance and aw value (surface moisture) to assess conditions of the room and wall
- Saving the data for documentation and comparison with previous measurements in order to evaluate corrective measures
Spares & Accessories (Not Included):
- USB Data Cable 0449 0047
- Aluminium Flight Case 0516 8450
- Silicone Heat Paste (14g), Tmax=+260C
- Emission tape for reflective surfaces 10mx25mm 0554 0051
ISSWWW and Testo
Testo Limited was established in 1983 as the UK subsidiary of testo and is based in Alton, Hampshire where they supply a full range of test equipment across the UK and Ireland. They are a key supplier to the Facility Management and Industrial Maintenance Sectors where they are able to provide the full range of instruments which are critical to the effective and efficient maintenance of premises, and allow compliance with all key regulations.
Testo have many innovative products to their portfolio with a modern attractive design. Aesthetic appeal isn't something usually attributed to test equipment but Testo really breaks the mould. Coupled with their pedigree as a worldwide manufacturer and supplier with a proven track record, we are confident in supplying and recommending Testo products without reservation.
| Key Features | 4 Point Laser, 50:1 Optics, Humidity Detection, Range -30 to +600 °C, Resolution 0.1 °C, Type K Thermocouple Connection, Windows® Software Available, Data Logging | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Testo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
*disabled for continuous measurement and USB connection Updated January 2024
Please note, our cut-off time is 2:00pmOrders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery. Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order. *UK Mainland (Revised March 2021)
Delivery SurchargesBecause of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
Offshore ServicesAll offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles. International deliveryInternational delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk ExportAll export inquiries should be directed to the export division before placement of order. If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
