Chauvin Arnoux CA8336 Qualistar Plus Power Analyser
- Comes with Free Clamps
- Multiple Connectivity Options
- Windows® Based Software Included
- Single Phase
- Three Phase
- Data Logging
- AC/DC Current
- Meter and Sequence Modes
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Chauvin Arnoux CA8336 Qualistar Plus Power Analyser
Top of the range three phase power analyser and available for a limited time with FREE Dataview software and four Ampflex A193 Clamps !
Designed for test and maintenance teams working in industrial or administrative buildings, the Qualistar+ CA8336 can be used to obtain a snapshot of the main features characterizing the quality of the electrical network.. This analyser's functions make it the ideal instrument for preventive or corrective maintenance. It can also be used to perform a complete energy survey of an installation.
For sizing installations or troubleshooting switching faults, the C.A 8336 is equipped with Inrush and TrueInrush functions.
Easy to handle and particularly compact, this instrument also offers a large number of calculated values and several processing functions. The C.A 8336 is equipped with 4 voltage measurement channels and 4 current measurement channels. The CA8336 captures and records all the parameters, transients, alarms and waveforms simultaneously.
When current sensors are connected to the CA8336, it recognizes them automatically. It also offers the possibility of mixing different types of current sensors and configuration of the ratios allows direct reading of the measurements.
Key Features:
- TRMS AC+DC voltage up to 1,000 V
- TRMS AC+DC current: 5 mA to 10 kA depending on the sensors
- Frequency
- Power values: W, VA, var, VAD, PF, DPF, cos φ, tan φ
- Energy values: Wh, varh, VAh, VADh, BTU, toe, Joule,
- Harmonics from 0 to the 50th order, phase
- Transients: up to 210
- Inrush with waveform over a period > 10 minutes
- TrueInrush function
- Recording of a selection of parameters at the maximum sampling rate for several days to several weeks
- Alarms: 10,000 of 40 different types
- Peak detection
- Vectorial representation
- Available in more than 27 languages
- IP53 / IK08
- USB communication
- IEC 61000-4-30 Class B
- Dimensions / weight: 240 x 180 x 55 mm / 1.9 kg
- Export results to Microsoft Excel® spreadsheet
Specially designed for work in the field:
- Direct access to the main functions (configuration, etc.)
- Direct access to the measurements (harmonics, flicker, etc.)
- Voltage/current inputs equipped with colour-coded inserts
- Large colour TFT screen for easy reading
- Battery life: 13 hrs
Software:
*You must have Administrator rights on the PC to install DataView®. **Windows® is a registered trade mark of Microsoft® Corporation
Connections:
The Qualistar models are ideal for applications on all types of electrical networks, from the simplest to the most complex:
- Single-phase, split-phase and three-phase with or without neutral
- All types of 2, 3, 4 and 5-wire electrical networks
- 2-wattmeters method
- ARON
- 2 ½ elements
Spares & Accssories (Not Included):
- Reeling Box P01102149
- Magnetised Voltage Probes P01103058Z
- ESSAILEC connexion kit Adapter P01102131
- CA833* Kit carry case, no22 P01298056
- CA833* Instrument carry case, no21 P01298055
- CA833* Lead carry case, no6 P01298051
- PA30W, Mains power supply P01102057
| Chauvin Arnoux Power and Energy quality Analysers CA8331/CA8333/CA8336/CA8436 | ||||
| Technical Specification | CA8331 | CA8333 | CA8336 | CA8436 |
| Number of Channels | 3U / 4I | 4U / 4I | ||
| Number of Inputs | 4V / 3I | 5V 4I | ||
| Voltage (TRMS AC+DC) | 2V to 1,000V | |||
| Voltage Ratio | Up to 500kV | |||
| Current (TRMS AC+DC) MN Clamps | MN93: 500 mA to 200 Aac; MN93A: 0.005 Aac to 100 Aac | |||
| C193 Clamp | 1 A to 1,000 Aac | |||
| AmpFlex® or MiniFlex® clamps | 100 mA to 10,000 Aac | |||
| PAC93 Clamp | 1 A to 1,300 Aac/dc | |||
| E3N Clamp | 50 mA to 100 Aac/dc | |||
| J93 | 50 A to 3,500 Aac / 5,000 Adc | |||
| Current Ratio | up to 60 kA | |||
| Frequency | 40 Hz to 69 Hz | |||
| Power Values | W, VA, var, VAD, PF, DPF, cos φ, tan φ | |||
| Energy Values | Wh, varh, VAh, VADh | |||
| Harmonics | Yes | |||
| THD | yes, orders 0 to 50, phase | |||
| Expert Mode | - | Yes | ||
| Transients | - | 50 | 210 | |
| Flicker Pst | Yes | |||
| Plt | - | - | Yes | |
| Inrush Mode | - | Yes on 4 periods | Yes> 10 minutes | |
| Unbalance yes | Yes | |||
| Recording Min/Max | Yes | |||
| of a selection of parameters at the Max sampling rate. | 4 hours to 2 weeks | Few days to several weeks | 2 weeks to several years | |
| Alarms | - | 4,000 of 10 different types | 10,000 of 40 different types | |
| Peak | Yes | |||
| Vectorial representation | Automatic | |||
| Display | Colour ¼ VGA TFT screen, 320 x 240, diagonal 148 mm | |||
| Capture of screens and curves | 12 | 50 | ||
| Electrical safety | IEC 61010 1,000 V CAT III / 600 V CAT IV | |||
| Protection | IP53 / IK08 | IP67 | ||
| Languages | More than 27 | |||
| Communication interface | USB | |||
| Battery life | Up to 13 hours | |||
| Power supply | 9.6 V NiMH rechargeable battery or external mains charger | |||
| Dimensions | 240 x 180 x 55mm | 270x250x180mm | ||
| Weight | 1.9Kg | 3.7Kg | ||
ISSWWW and Chauvin Arnoux
The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.
ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.
| Key Features | Comes with Free Clamps, Multiple Connectivity Options, Windows® Based Software Included, Single Phase, Three Phase, Data Logging, AC/DC Current, Meter and Sequence Modes | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Chauvin Arnoux | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA