Fluke 1760 Three Phase Power Quality Recorder

Name: Fluke 1760 Three Phase Power Quality Recorder
Brand: Fluke Testers
SKU: FLUFLK-1760
Price: 14694 GBP
Availability: InStock

£14,694.00 £12,245.00

SKU

FLUFLK-1760

The Fluke 1760 Three Phase Power Quality Recorder. Fully compliant to IEC 61000-4-30 Class-A

Price Banner

Our Discount Guarantee

Three Phase
Includes Flexi Clamps
Software included
Data Logging
AC/DC Current
GPS Synchronization

Data-logging
AC/DC Current
Includes Flexi-clamps
Software Included
Three Phase

Information on the calibration of newly purchased equipment and what it means to you.

Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Personalised traceable calibration certificate from isswww

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.

Skip to the end of the images gallery

Fluke 1760 Three Phase Power Quality Logger with clamps

Skip to the beginning of the images gallery

Description

Fluke 1760 Three Phase Power Quality Recorder

Class-A compliance for the most demanding power quality tests

The Fluke 1760 Three-Phase Power Quality Recorder is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and low-voltage networks, this power quality monitor provides the flexibility to customize thresholds, algorithms, and measurement selections. The 1760 power recorder captures the most comprehensive details on user-selected parameters.

Key Features:

Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
GPS time synchronization: Correlate data with events or datasets from other instruments with precision
Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
Uninterrupted power supply (40 minutes): Never miss important events - even record the beginning and end of interruptions and outages to help determine the cause
10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions

Product Feature	Fluke 1760 Basic	Fluke 1760TR Basic	Fluke 1760	Fluke 1760TR
Power quality statistics according to EN50160	●	●	●	●
Voltage event list (dips, swells and interruptions)	●	●	●	●
Continuous recording of:
Voltage	●	●	●	●
Current	●	●	●	●
Power P, Q, S	●	●	●	●
Power factor	●	●	●	●
kWh	●	●	●	●
Flicker	●	●	●	●
Unbalance	●	●	●	●
Frequency	●	●	●	●
Voltage and current harmonics to the 50th / Interharmonics	●	●	●	●
THD	●	●	●	●
Mains signaling	●	●	●	●
Triggered recordings	●	●	●	●
Online mode (Oscilloscope, transients and events)	●	●	●	●
Fast transient analysis up to 10 MHz		●		●
4, 600V voltage probes			●	●
4 dual-range flexible current probes (1000 A / 200 A ac)			●	●
GPS time sync receiver			●	●
Memory	2 GB Flash memory

Typical Applications:

Detailed disturbance analysis – Perform high-speed transient analysis and uncover root cause of equipment malfunction for later mitigation and predictive maintenance. The fast transient option, with its 6000 V measurement range, allows capture of very short impulses such as lightning strikes.

Class-A quality-of-service compliance – Validate incoming power quality at the service entrance. Thanks to Class A compliance, the Fluke 1760 allows undisputable verification.

Event correlation at multiple locations – Utilizing GPS time synchronization, users can quickly detect where a fault occurred first, either inside or outside the facility.

Galvanic separation and DC coupling – Allows complete measurements on dissimilar power systems. For example troubleshoot UPS systems by simultaneously recording the battery voltage and power output.

Power quality and power load studies – Assess baseline power quality to validate compatibility with critical systems before installation and verify electrical system capacity before adding loads.

Model Name	Description
Fluke 1760 Basic	Power Quality Recorder Topas with 8 input-channels (4 currents/4 voltages or 8 voltages) Includes: Internal Flash-memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct PC connection (1) Mains cable (1) Operational manuals Carrying bag
Fluke 1760TR Basic	Power Quality Recorder Topas with 8 input-channels (4 currents/4 voltages or 8 voltages) Includes: Internal Flash-memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct PC connection (1) Mains cable (1) Operational manuals Carrying bag Fast transient analysis up to 10 MHz
Fluke 1760	Power Quality Recorder Topas with 8 input-channels (4 currents/4 voltages or 8 voltages) Includes: Internal Flash-memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct PC connection (1) Mains cable (1) Operational manuals Carrying bag Voltage probes, qty 4 (600 V for INTL set, 1000 V for US set) Current probes, qty 4 (Dual-range flexible current probes 1000 A / 200 A AC) GPS time sync receiver
Fluke 1760TR	Power Quality Recorder Topas with 8 input-channels (4 currents/4 voltages or 8 voltages) Includes: Internal Flash-memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct PC connection (1) Mains cable (1) Operational manuals Carrying bag Fast transient analysis up to 10 MHz Voltage probes, qty 4 (600 V for INTL set, 1000 V for US set) Current probes, qty 4 (Dual-range flexible current probes 1000 A / 200 A AC) GPS time sync receiver

Features & Specification

More Information

Key Features

Three Phase, Includes Flexi Clamps, Software included, Data Logging, AC/DC Current, GPS Synchronization

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Fluke Testers

Short Description

Overview of Measurement Functions

Statistical Evaluation

Power quality statistics according to EN50160 and DISDIP tables like ITIC, CEBEMA, ANSI

Event List

	Dips, swells and interruptions are detected and stored in the event list. Also any trigger which fires generates an event added to this list.
	The Event list shows the exact time when the event occurred as well as the duration and magnitude. Sorting by several attributes of these events is possible to select one for further root cause analysis.
	RMS values, transients and fast transients can be stored if a trigger fires.

Continuous Recording

	Fluke 1760 records rms values together with corresponding minimum and maximum values for:
	• Voltage
	• Current
	• Power P, Q, S
	• Power Factor
	• kWh
	• Flicker
	• Unbalance
	• Frequency
	• Harmonics/Interharmonics
	continuously with the following time aggregations:
	Day
	10 min
	Free Interval, e.g.: 15 min, 2h

Triggered Recordings

rms:	Aggregation time is adjustable between 10 ms (1/2 cycle), 20ms (1 cycle), 200ms (10/12 cycles) or 3 sec (150/180 cycles).
	Calculating rms values, Harmonics and Interharmonics is performed synchronous to the power frequency.
	Basic aggregation for harmonics and interharmonics is 200ms
Oscilloscope:	Sample rate is 10.24 kHz for all 8 channels
Fast Transients:	Sample rate is selectable from 100 kHz to 10 MHz for channel 1-4 FFT of Fast Transients

Mains Signalling

Phases and N-conductor, Voltage and current

Online Mode

Variable refresh rate. This feature allows verification of instrument set up and delivers a quick overview of oscilloscope, transients and events.

General Data

Intrinsic uncertainty

refers to reference conditions and is guaranteed for two years

Quality system

developed, manufactured as per ISO 9001: 2000

Environment conditions

Operating temp. range:	0 °C to +50 °C; 32 °F to +122 °F
Working temp. range:	-20 °C to +50 °C; -4 °F to +122 °F
Storage temp. range:	20 °C to +60 °C; -4 °F to 140 °F
Reference temperature:	23 °C ± 2 K; 74 °F ± 2 K
Climatic class:	B2 (IEC 654-1), -20 °C to +50 °C; -4 °F to +122 °F
Max. operating altitude:	2000 m: max. 600 V CAT IV, power supply: 300 V CAT III 5000 m: max 600 V CAT III, power supply: 300 V CAT II * depending on sensor

Reference conditions

Environment temp.:	23 °C ± 2 K ; 74°F ± 2 K
Power supply:	230 V ± 10 %
Power frequency:	50 Hz / 60 Hz
Signal:	declared input voltage Udin
Averaging:	10 minute intervals

Housing

insulated, robust plastics housing

EMC

Emission:	Class-A as per IEC/EN 61326-1
Immunity:	IEC/EN 61326-1

Power supply

Range:	AC: 83 V to 264 V, 45 to 65 Hz
	DC: 100 V to 375 V
Safety:	IEC/EN 61010-1 2nd edition
	300 V CAT III
Power consumption:	max. 54VA
Battery pack:	NIMH, 7.2 V, 2.7 Ah
	In case of a power supply failure an internal battery maintains the supply for up to 40 minutes. Afterwards, or in case of discharged accumulators the Fluke 1760 is turned off and continues the measurements with the latest settings as soon as the supply voltage returns. The battery can be replaced by the user.

Display

	Fluke 1760 features LED indicators for the status of the 8 channels, phase sequence, power supply (mains or accumulator), memory usage, time synchronization, and data transfer.
Power LED:	• Permanent light: normal power supply from mains.
	• OFF: supply via internal accumulator in case of a power failure.
Channel LEDs	3-color LEDs per channel for:
	• overload condition
	• under load condition
	signal level in nominal range

Data memory

2 GB Flash memory depending on model

Memory model

Linear

Interfaces

Ethernet (100MB/s), compatible to Windows® 98/ME/NT/2000/XP RS 232, external modem via RS 232

Baud rate for RS 232

9600 Baud to 115 kBaud

Dimensions

325 mm x 300 m x 65 mm; 2.8 x 11.8 x 2.6 in. (H x W x D)

Weight

appr. 4.9 kg; 10.8 lbs. (without accessories)

Warranty

2 years

Calibration interval

1 year recommended for Class-A, otherwise 2 years

Signal Conditioning

Range for 50 Hz systems

50 Hz ± 15 % (42.5 Hz to 57.5 Hz)

Range for 60 Hz systems

60 Hz ± 15 % (51 Hz to 69 Hz)

Resolution

16 ppm

Sampling frequency for 50 Hz power frequency

10.24 kHz, The sampling rate is synchronized to mains frequency.

Uncertainty for frequency measurements

< 20 ppm

Uncertainty of internal clock

< 1s / day

Measurement intervals

	Aggregation of the interval values as per IEC 61000-4-30 Class-A
Min-, Max-values:	Half cycle, e.g.: 10 ms rms values at 50Hz
Transients:	Sample rate 100 kHz to 10 MHz per channel

Harmonics

as per IEC 61000-4-7:2002: 200 ms

Flicker

as per EN 61000-4-15:2003: 10 min (Pst), 2 h (Plt)

Measurement Inputs

Number of inputs

8 galvanically isolated inputs for voltage and current measurements.

Sensor safety

up to 600 V CAT IV depending on sensor

Basic safety

300 V CAT III

Nominal voltage (rms)

100 mV

Range (peak value)

280 mV

Overload capacity (rms)

1000 V, continuously

Voltage rise rate

max. 15 kV / µs

Input resistance

1 MΩ

Input capacitance

5 pF

Input filter

	Each channel is equipped with a passive low-pass filter, an anti-aliasing filter and a 16-bit A/D converter. All channels are sampled synchronously with a common quartz-controlled clock pulse.
	The filters protect against voltage transients and limit the signal rise rate, reduce high frequency components and especially the noise voltage above half the sampling rate of the A/D converter by 80 dB, thus achieving very small measuring errors in an exceptionally large amplitude range. This is also valid under extreme operating conditions like transient voltages at the output of converters.

Uncertainties

Uncertainty at reference conditions

	Uncertainty including the voltage sensors is in compliance with IEC 61000-4-30 Class-A. All voltage sensors are suitable for DC up to 5 kHz
With Sensor 1000 V	0,1% at Udin = 480 V and 600 V P-N
Sensor 600 V	0,1% at Udin = 230 V P-N

Intrinsic uncertainty for harmonics

Class I as per EN 61000-4-7:2002

Reference conditions

	23 °C ± 2 K < 60 % rH; 74 °F ± 2 K < 60 % rH
	Warmed up instrument > 3h
	Power supply: 100 V to 250 V ac

Temperature drift

100 ppm / K

Aging

< 0.05 % / year

Common mode rejection

> 100 dB at 50 Hz

Temperature drift

Change of amplification through temperature: < 0.005 %/K

Aging

Change of amplification due to ageing: < 0.04 %/year

Noise

Noise voltage, input short-circuited: < 40 µV

± (0.2% rdg + 0.1% sensor)

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA

Fluke 1760 Three Phase Power Quality Recorder

Our Discount Guarantee

Fluke 1760 Three Phase Power Quality Recorder

Class-A compliance for the most demanding power quality tests

Key Features:

Typical Applications:

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Bank/Public Holidays

*UK Mainland (Revised March 2021)

Delivery Surcharges

Offshore Services

International delivery

Export

Twitter