Time Electronics 1090 Portable Process Calibrator

Name: Time Electronics 1090 Portable Process Calibrator
Brand: Time Electronics
SKU: TIM1090
Price: 1822.8 GBP
Availability: InStock

£1,822.80 £1,519.00

SKU

TIM1090

The 1090 is a precision portable process calibrator that combines source and measurement functions for thermocouples, PT100s, µV, mV & mA

Process Loops
Measure/simulate thermocouples
Measure/simulate PT100
10 point memory recall

Information on the calibration of newly purchased equipment and what it means to you.

Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

Personalised traceable calibration certificate from isswww

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

The 1090 is a precision portable process calibrator that combines source and measurement functions for thermocouples, PT100s, µV, mV & mA.
As a multifunction instrument the 1090 combines accuracy and durability with simple operation, making it ideal for process plant applications.

A portable, key-press operation instrument that combines source and measurement functions for thermocouples, RTDs, mV and mA. This model features a memory storage function that holds frequently used values.

• Measures/simulates 8 thermocouple types, PT100 -RTD, mV and mA
• Displays units in °C, °F, μV/mV, or mA
• Accuracy: Source 0.02% of range, 0.5°C. Measure 0.05% of range, 0.7°C
• Automatic or manual cold junction compensation
• Inching and step functions with time configurable steps
• Process loops 4 to 20mA and 0 to 50mA
• 24V loop drive voltage
• Mains or battery operation – 60 hours typical use between charges
• Supplied with battery charger and carry case
• H235 x W150 x D75mm, weight 1.25kg

Thermocouple Measurement and Simulation
Measure and simulate the temperature and mV characteristics of J, K, T, R, S, B, N and E thermocouples.

Cold Junction Compensation
The unit can be operated with or without internal cold junction compensation.

PT100 Measurement and Simulation
Based on 0.3850 alpha probe standard. Range is -200°C to 700°C.

Measurement and Source (µV, mV, and mA)
Measurement ranges are 0 to +/-30mV and 0 to +/-60mA. Source ranges are 0 to +/-80mV and 0 to +80mA.

Temperature Units Selection
The display can be easily changed from °C to °F. The equivalent uV (thermocouples) and ohms (PT100) can also be shown.

24V Process Loop Drive Mode
A process loop can be driven at 24V and up to 60mA by selecting the ‘Milliamp Source’ mode and setting it at 60mA (or a lower level if required).

Inching (Incrementing/Decrementing)
The unit has a general-purpose inching function. This adjusts the output in fixed increments of temperature (thermocouples only) or voltage or current. The set-up menu gives a the user a choice of three levels of increment i.e. 0.1, 1 or 10 for °C/°F, or 1, 10, or 100 uV/uA for voltage/current. The lowest of these represents the highest setting resolution and provides the most precise control of the output. This is especially useful for calibrating thermostat controllers that have tight specification on hysteresis.

Memory Recall and Step/Auto-Step Functions
Up to 10 values can be stored in the unit’s non-volatile memory and they can be recalled at any time. The user can also manually step through them in sequence using the step key. Continuous stepping (auto-step) is also available at any user selectable rate between 1 & 10 seconds/step.

Power is via an internal high capacity rechargeable metal hydride battery that can be recharged from the supplied external mains charger. An auto power-down feature helps conserve battery life by switching off the instrument if inactive for over 5 minutes. This feature can be disabled if not required. The unit is supplied in a robust case with a carrying strap. A pocket for the instruction manual is provided

Features & Specification

More Information

Key Features

Process Loops, Measure/simulate thermocouples, Measure/simulate PT100, 10 point memory recall

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Time Electronics

Short Description


Thermocouple Type	Temperature Range (°C)	Accuracy (°C)
J	-200 to 580	0.7
K	-200 to -150 -150 to 750	2.5 0.5
T	-200 to 0 0 to 400	1.5 0.4
R	50 to 400 400 to 1750	3.0 1.5
S	-50 to 100 100 to 1750	3.0 1.5
B	110 to 1000 1000 to 1800	3.5 1.5
N	-100 to 890	0.6
E	-50 to 400	0.4

Resolution	0.1°C or 0.1°F


Thermocouple Type	Temperature Range (°C)	Accuracy (°C)
J	-210 to 150 150 to 1200	0.15 0.3
K	-270 to 190 190 to 1250	0.5 0.4
T	-200 to 150 150 to 400	0.4 0.5
R	-50 to 800 800 to 1750	0.8 2.0
S	-50 to 850 850 to 1750	0.9 2.0
B	100 to 1200 1200 to 1800	2.0 3.0
N	-270 to 260 260 to 1300	0.5 1.0
E	-50 to 1000	0.3

Resolution	0.1°C or 0.1°F

Note: An additional correction representing the equivalent 1μV should be allowed for stray thermal emf effects (Temperature measure & simulation).


14 set temperature points (°C)	Accuracy
-100, -50, -20, 0, 20, 50, 100, 200, 300, 400, 500, 600, 700, 800	0.1% of resistance value (typically 0.5 °C)


Range	Accuracy	Resolution
200 to 700 °C, 2 wire.	0.2% of resistance value (typically 0.7 °C)	0.2°C (or 0.2°F)


Range	Resolution	Accuracy	Input Resistance
0 to +/- 30mV	10μV	0.05% of full scale ±1 digit	100kΩ


Range	Resolution	Accuracy	Output Resistance
0 to 8mV	0.5μV	+/- 4μV	10Ω
8 to 80mV	5μV	0.02% of full scale	10Ω


Range	Resolution	Accuracy	Input Resistance
0 to 60mA	20μA	0.05% of full scale ±1 digit	0.5Ω


Range	Resolution	Accuracy
0 to 8mA	0.5μA	+/-10μA
8 to 80mA	5μA	0.02% of full scale


Inching	Three levels of increment, 0.1, 1 or 10 for °C/°F, and 1, 10, or 100 μV/ μA for voltage/current. The lowest of these represents the highest setting resolution and provides the most precise control of the output.
24V Process Loop Drive	A process loop can be driven at 24V and up to 60mA by selecting the ‘Milliamp Source’ mode and setting it at 60mA (or a lower level if required). Max Load Specifications: 300Ω/80mA, 480Ω/50mA, 1.2kΩ/20mA
Memory recall & step	10 memory locations for non-volatile storage of values. Manual & AutoStep, rate adjustable from 1 to 10 sec/step

Cold Junction Compensation	Accuracy 0.2°C. Resolution 0.1°C.
Operating Temperature	-10 to 40°C (15 to 105°F)
Connections	Industry standard 4mm screw terminals
Power	A Ni-MH rechargeable battery pack gives approx. 60 hours continuous use. The mains recharger supplied gives full recharge in 11 hours. To conserve battery life a user inactivity power-down feature is included.
Dimensions	H235 x W150 x D75mm
Weight	1.2kg
Supplied With	Carry case, rechargeable battery pack (installed) with mains charger, and user manual
Optional Extras	Calibration certificates traceable NPL and UKAS
Country of Origin	UK

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA