ACT 612 6V 12V Battery Tester
- Discharge Testing
- Manufacturer Certificate Included
- Intelligent Battery Tester
- 6V & 12V Battery Models
- Simple Operation
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
ACT 612 6V/12V Battery Tester
The ACT 612 is a dual voltage intelligent battery tester, designed for 6V and 12V lead acid batteries from 1.2Ah to 100Ah, making it capable of testing 12V batteries up to 150Ah. It`s the only product of its kind to have an Ampere-hour (Ah) calibration control, enabling Ah readings to be adjusted to suit various battery technologies including standby SLA (AGM), cyclic GEL and car FLOODED (WET) batteries.
The ACT 612 Comes Supplied With:
- ACT 612TL Test Leads
- ACT 430N Soft Carry Case
- Sample ACT BTL Labels
- Operating Instructions
- Certificate of Calibration
Test SLA, GEL & FLOODED
Simply turn the Ah Calibration Control to select either standby SLA, cyclic GEL or car FLOODED battery types before testing. The Calibration Control also allows you to calibrate the battery tester to non-standard battery types.
For 6V & 12V battery models
Test 6V battery models between 1.2Ah and 12Ah, and 12V battery models between 1.2Ah and 100Ah. With a wide Ah range, the ACT 612 is ideal for testing batteries used in many applications from security, and mobility to leisure.
Simple Operation
Connect the clamps to the battery, turn the Ah Calibration Control to the desired battery type under test, and press the ‘TEST’ button. It’s that easy. Results will be displayed within seconds.
DC Voltage and Ah Capacity Results
There are no confusing conversion rates or user interpretation needed when using the ACT 612. Two results are displayed – the battery’s DC voltage followed by the actual Ah capacity available.
When to Recharge or Replace
Battery manufacturers recommend recharging or replacing a battery when its rated Ah capacity falls below 65%. By giving a clear and accurate Ah reading, ACT 612 will help you identify replacements quickly and easily.
Advanced Pulse Load Technology
ACT 612 uses advanced pulse load technology to analyse Ah capacity, based on the battery’s temperature and state of charge. This method is significantly more accurate than measuring voltage and internal resistance and does not deplete the battery, unlike a conventional load tester.
Reliable, Continuous Testing
Powered by the battery under test and with ultra-low heat generation.
Portable
Perfectly suited as a bench tester or out with the engineer.
Economical
Identify batteries that still have life remaining and reduce the amount discarded unnecessarily.
Profitable
Show the customer the result and increase your battery sales by recommending a new battery for their system.
isswww and ACT Meters
ISSWWW is a trusted distributor of ACT Meters equipment. Act Meters is a global supplier of alarm test equipment with unique products such as battery testers that make an engineer’s job easier. ACT Meter products are quick and easy to use, revealing voltage and capacity within seconds.
| Key Features | Discharge Testing, Manufacturer Certificate Included, Intelligent Battery Tester, 6V & 12V Battery Models, Simple Operation | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | ACT Meters | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
Updated January 2024
Please note, our cut-off time is 2:00pmOrders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery. Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order. *UK Mainland (Revised March 2021)
Delivery SurchargesBecause of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
Offshore ServicesAll offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles. International deliveryInternational delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk ExportAll export inquiries should be directed to the export division before placement of order. If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
