Chauvin Arnoux CA6460 Earth Tester
- 3 pole testing
- 4 pole testing
- Backlit Display
- One Button Operation
- High Accuracy
- 3-pole Testing
- 4-pole Testing
- Backlit LCD Screen
- High Accuracy
- One Button Operation
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Chauvin Arnoux CA6460 Earth and Resistivity Tester
In its rugged, leakproof case, the C.A. 6460 is easy to use, and designed specifically for work in the field. A genuine 3-in-1 tester delivered in a rugged, leakproof case, the C.A 6462 is specially designed for use in the field. Particularly simple to use wherever you need to set up an earth electrode or test an existing earth connection, this tester helps you to quickly make a precise, reliable diagnosis while maintaining user comfort and safety.
Ergonomics
• Rugged, leakproof site case for use in the field
• Large 2,000-count backlit LCD screen for easy reading
• Digital display of the values measured and the units
• Simple to operate
• Instant connection thanks to colour-coding of the terminals and leads
Measurements
• Earth resistance measurement with the 3 or 4-pole method and soil resistivity measurement
• Designed to reject high levels of noise and interference
• Auto-ranging
• 3 warning LEDs: high noise level, high auxiliary stake resistance, connection fault Power supply
• Battery-powered (C.A 6460) or rechargeable battery (C.A 6462)
Wherever it is necessary to install an earth connection or characterize an existing earth, it helps to establish an accurate, fast and reliable diagnosis with optimum comfort and safety.
Delivered with 8 x 1.5 V LR14 batteries and 1 operating manual in 5 languages
- 3-in-1 tester: resistivity, earth, coupling between two earths
- Measurement range: 0.01 to 2,000 Ω (3 automatic ranges)
- Change from 4-wire method to 3-wire method thanks to 1 removable captive bar between E and ES
- 3 fault presence indicators to validate measurement
- Measurement frequency: 128Hz
- Easy connection of stakes by means of colour-coded terminals
- Large backlit digital display with 2,000 counts
- Power supply: 8 x 1.5V batteries for an average battery life, constantly checked, of 4,500 measurements of 15s each
- IP53 leakproof case with folding cover and carrying handle
- Compliant with IEC 61557 -1 and -5
- Electrical safety: EN 61010
- Dimensions: 273 x 247 x 127mm - weight: 2.8kg
Key Features:
- 3-in-1 tester: resistivity, earth, coupling between two earths
- measurement range: 0.01 to 2,000 Ω (3 automatic ranges)
- change from 4-wire method to 3-wire method thanks to 1 removable captive bar between E and ES
- 3 fault presence indicators to validate measurement
- measurement frequency: 128Hz
- easy connection of stakes using colour-coded terminals
- large backlit digital display with 2,000 counts
- power supply: NiMH rechargeable battery for an average battery life, constantly checked, of 1,180 measurements of 15s each
- IP53 leakproof case with folding cover and carrying handle
- compliant with IEC 61557 -1 et -5
- electrical safety: EN 61010
- dimensions: 273 x 247 x 127 mm - weight: 2.8 kg
Use and Applications:
isswww and Chauvin Arnoux
The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with the design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.
ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.
| Key Features | 3 pole testing, 4 pole testing, Backlit Display, One Button Operation, High Accuracy | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Chauvin Arnoux | ||||||||||||||||||||||||||||||||||||||||
| Short Description |
Product Stock Status |
Next Day Delivery (subject to availability) |
Updated January 2024
Please note, our cut-off time is 2:00pmOrders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery. Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order. *UK Mainland (Revised March 2021)
Delivery SurchargesBecause of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
Offshore ServicesAll offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles. International deliveryInternational delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk ExportAll export inquiries should be directed to the export division before placement of order. If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
| ||||||||||||||||||||||||||||||||||||||
