BK-G4P BSP Screwed Diaphragm Gas Meter 0.04 – 6 m3hr – 20mm
- MID Approved
- Flow Rate 0.04m3 /h to 6m3 /h
- Pulse Transmitter
- Cyclic Volume 1.2L
- Maximum Operating Pressure 0.5 bar
- MeterOnline Management Available
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
BK-G4P BSP Screwed Diaphragm Gas Meter, 0.04 – 6 m3/hr – 20mm with pulse output
MID approved
Applications:
Media: Natural gas, town gas, propane, butane air *
Industry: Gas supply
Tasks: BK-G4 - gas measurement at operating conditions**
* Other media: Inert gases to EN 437
** BK-G6T: Measurement of temperature-compensated gas volume
Overview:
The residential diaphragm gas meters BKType meet the highest demands with respect to accuracy of measurement and safety. It incorporates both innovative features and gas measurement know-how of many decades.
The BK-Type meters are supplied in a two-pipe version.
This can be paired with an EMA1 Topup Meter allowing you to run both gas and electric in prepayment.
All that is required is an Atex gas sender fitted to the gas meter. This will then communicate with the *EMA1 Topup meter allowing both electricity
and gas to be charged.
Please see our separate listings:
ATEX Gas Water Heat Sender PMM1280
Key Features:
• MID conformity approved by PTB
• Approved to EN 1359 by German DVGW
• EU Approval by German PTB
• Flow rates from 0.04 m3/h to 6 m3/h
• Cyclic Volume 2 litres
• Firesafe (HTB) up to 0.1 bar according to EN 1359
• Maximum working pressure 0.5 bar
• High accuracy and long-term stability
• Powder-coated pale grey to RAL 7035
• Standard pulse magnet; retrofittable table LF pulser (l=0.01 m³/pulse)
• Not susceptible to contamination (RPF = 0.65)
• Temperature range: Standard: -10 °C to +40 °C, other temperatures on request
• Temperature compensation available
• Intelligent index technology, Chekker system, Absolut-ENCODER and radio applications
isswww and JW SmartMeters
JW SmartMeters distribute a wide range of high-quality, competitively priced electricity, heating, water and gas meters across the UK and overseas. Over the years we’ve built a strong association with JWS and supply their products to our customers on a daily basis. All of their meters are MID approved and certified, conforming to current legislation.
Meters are available for both domestic and commercial purposes, providing landlords, caravan parks, marinas, student accommodation developments, schools, hospitals and industrial units with smart, easy-to-install products to suit their individual requirements.
With their extensive knowledge and exceptional standards of customer care, they’re one of the leading distributors offering electric meters for sale in the marketplace today.
| Key Features | MID Approved, Flow Rate 0.04m3 /h to 6m3 /h, Pulse Transmitter, Cyclic Volume 1.2L, Maximum Operating Pressure 0.5 bar, MeterOnline Management Available | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||
| Manufacturer | JW SmartMeters | ||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA