Anton Sprint Pro 5 Multifunction Flue Gas Analyser
- Bluetooth Connectivity
- Calculates Combustion Efficiency
- Complies to BSI EN50379:2012 1&3
- Double Water-stop Technology
- NO/NOx Measurement
- Calculates CO2 CO and O2
- Works With Smartphone and App
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Anton Sprint Pro 5 Multifunction Flue Gas Analyser
|
DELIVERY SCOPE Flue gas analysers are ordered back to back from many suppliers. This is due to the degradation that can occur with certain sensor heads that are held on shelves for too long and affects all distributors. We want you to receive the best product with the maximum life efficiency possible, with this in mind please allow for a slightly longer than usual delivery, generally around 4-5 days. |
Drawing on over 30 years of experience of providing test and measurement solutions to the heating industry, the all new Sprint Pro range has been designed to be the most reliable and comprehensive range of flue gas analysers we've ever produced. UK designed, made and supported; the new Sprint Pro really is the professionals choice.
Industry leading features such as washable particulate filters, double water-stop technology, secure-click probe connection and robust design filter bowl along with the sensor over-range protection make the Sprint Pro the only flue gas analyser you need.
Delivery*
*Please be aware that due to the complex nature of the sesnor arrangements, Sprint Pro models 4, 5 and 6 are built to order and are subject to a lead time that can vary. Generally speaking please allow 2 weeks for these units, we will advise accordingly with a more precise time within a few business hours.
NO/NOx Measurement
Pro5 & Kits = As Pro3 & Kits with the addition of an NO sensor for NOx measurement in flue gas mode - ideal for commercial customers who need NOx measurement in FGA readings.
*Note the NO/NOx capability replaces the Direct CO on this model. If you wish to have both functionalities please look at the Sprint Pro 6 options.
See why the Anton Sprint is their best Flue Gas Analyser to date:
- Unrivalled double protection against condensate ingress damage. Water-stop technology protects against down time.
- New condensate trap design is more robust and easier to empty, complete with washable foam dust filter saving you money.
- Comprehensive range of models to suit your requirements BSI tested to EN50379:2012 1 & 3. Use for: BS7067 & BS8494.
- Direct Infrared CO2 measurement options now available (Pro 4 onwards) for commercial catering and incident investigations, bespoke reports up to 7 days.
- NO/NOx measurement options also now available (Pro 5 onwards).
- Full connectivity with iOS and Android devices on Sprint Pro 3 model and above using the Sprint Mobile app.
- Robust construction, ergonomic design for today's professional engineer.
- Intuitive, easy to navigate menu driven software, navigated using the new large keypad.
- High contrast screen with coloured prompts and warnings.
- Easy USB-C charging for analyser and printer at home, on site or in your vehicle.
- New drop-in bag design allows quick removal and replacement of FGA and accessories, business card holder and shoulder strap.
- New secure click-in flue probe connector to FGA with additional filtration.
- Built in sensor over-range protection for all Sprint Pro models.
- Future proof, Sprint Pro2 and above can all be upgraded to any higher model at a later date if your requirements change.
Calibration and Servicing:
All Anton Sprint pro gas analysers are odered direct from the factory and come with a manufacturers certificate of calibration.
The unit has the abilty to detect a current valid calibration, operation is not possible outside of this period and will not allow the use of the FGA functions.
This feature gives you total peace of mind that your analyser is within calibration and therefore keeping you compliant and legal.
The Sprint Pro will warn you of an upcoming calibration requirement 1 month before it's due date and help with the contact and selection of an appointed service centre.
Sprint Pro 5 Standard Model Features:
• Flue Gas Analysis, Ratio, Excess Air Temp, Efficiency. Full Pressure Menu including Let By & Tightness Test
• Dedicated NO measuring sensor to measure Nitric and Nitrogen Oxide gases.
• Same high build quality as the rest of the Pro range but with reduced features
• Most cost effective model popular with oil engineers and commissioning engineers
• Unrivalled double protection against damage from condensate ingress – water stop technology protects against down time
• New condensate trap design is more robust and easier to empty, complete with washable particulate filter
• Robust construction, ergonomically designed for today’s professional engineer
• Intuitive, easy to navigate menu driven software with new large buttons
• High contrast screen with coloured prompts and warnings
• High quality UK manufactured Flue Gas Analyser, flue probe, charger and bag
• Easy USB-C charging for analyser & printer* at home, on site or in your vehicle
• New drop-in bag design allows quick removal and replacement of FGA and accessories
• New secure click-in flue probe connector to FGA
• Built-in sensor over range protection
• BSI tested to EN50379-1:2012 & EN50379-3:2012
• Suitable for engineers working with BS7967:2015
• Bluetooth connectivity for communiation via the Sprint Mobile App (iOS and Android versions available).
Sprint Pro 5 Basic Model Comes Supplied With:
- Anton Sprint Pro 5 Multifunction Flue Gas Analyser
- Gas Escape Probe
- Flue Probe
- USB-C Charger
- Drop-in Bag
- Pressure Hose
Sprint Pro 5 KIT A Comes Additionally With:
- Anton Sprint Pro 5 Multifunction Flue Gas Analyser
- USB-C Printer
- Flue Probe
- Gas Escape Probe
- Pressure Hose
- APRV
- 2 x Temperature Clamps
- Drop-in Bag
- Charger
Sprint Pro 5 KIT B Comes Additionally With:
- Anton Sprint Pro 5 Multifunction Flue Gas Analyser
- USB-C Printer
- Flue Probe
- Gas Escape Probe
- Pressure Hose
- APRV
- 2 x Temperature Clamps
- Drop-in Bag
- Charger
- BS7967 Probe Kit
Which Sprint Pro Model is Right For Me?
Anton Sprint Mobile App:
The tool any heating engineer can't be without. Take your business to the next level of efficiency and professionalism with the free Anton Sprint Mobile app.
Save time and impress customers with professional looking reports and gas certificates with wireless data transfer between your Anton Sprint eVo3 analyser and your phone or tablet.
All the reports you normally create from your analyser plus Landlord Certificates, Safety Notices, Gas Rates plus many more instantly created which can then be emailed straight to your customers.
Even if you don't own an Anton Sprint analyser there are still loads of features you can use in the free app:
Sprint Mobile also includes an easy to use account management package that allows you to create and email quotes and invoices whilst on site, and even take and manage payments and create receipts. Many Sprint Mobile users have won their evenings back as now all their paperwork is done during the normal working day without taking any extra time.
Many of the useful tools and calculators are all in one place in the Sprint Mobile app: Calculate gas rates, pipe sizing, ventilation requirements and radiator sizing as well as a useful energy conversion calculator.
Spares & Accessories:
Available Seperately
| AA15/HDH | Anton Liquid / Immersion Probe |
| ACMT | Anton Carbon Monoxide Tripod Kit |
| AOCK | Anton Oil Commissioning Kit |
| APRV | Anton Pressure Relief Valve |
| AS1/HDH | Anton Surface Temperature Probe |
| AS10/Clamp | Anton Pipe Clamp Temperature Probe |
| ASPK | Anton Smoke Pump Kit |
| C03737 | Pro Gas Escape Probe |
| C03738 | Pro Flue Gas Probe |
| C03738-B | Pro Bent Flue Gas Probe |
| C03740 | Pro Drop-in Bag for Sprint Range |
| C03743 | Anton Pro Infrared Printer (USB Charging) |
| 476-2033 | AA NiMH 1.2V Rechargeable Batteries for Pro Printer (Pack 4) |
| Clip CO | Crowcon Clip CO Personal Alarm (Engineer protection) |
| E01377 | USB Charger Adaptor for Pro Range |
| E01378 | USB-C Charger/Comms Lead for Pro Range |
| FIL29OIL | External Inline Oil Filter (Pack 5) |
| GK11M | Anton 1m Air Probe |
| HCC/1 | Anton Hard Carry Case |
| M03876 | Pro Depth Gauge & Screw |
| M03877 | Pro Cable Management Clip |
| M04202 | Pro Flue Probe Connector & Pipe |
| M049001 | Pro Dust Filter (Pack 10) |
| M049002 | Pro PTFE Filter (Pack 10) |
| Pro Filter Pack | Pro Dust / PTFE Filter Pack (2 of each) |
| M049003 | Pro Filter Bowl & Filters (PTFE & Dust Filter) |
| PAP26001 | Spare Paper Rolls for Anton Printer (Pack 10) |
| Pro BS7967 | Anton Pro BS7967 Probe Set |
About Anton
Anton provide innovative and market leading products and services aimed at making the job of a heating engineer easier. We are best known for our popular Anton Sprint eVo range of flue gas analysers, but we also offer power flushing equipment, a comprehensive range of pressure, temperature and other test equipment, personal CO alarms, gas leak detectors, infra-red thermometers and many more useful tools and accessories. Our products are available from all UK & Ireland plumbing and heating trade counters. See the range of products and accessories at ISSWWW.CO.UK
| Key Features | Bluetooth Connectivity, Calculates Combustion Efficiency, Complies to BSI EN50379:2012 1&3, Double Water-stop Technology, NO/NOx Measurement, Calculates CO2 CO and O2, Works With Smartphone and App |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | ANTON |
| Short Description | *Please see the Sprint Pro manual in the resources section for a full specification list, noting that this changes from model to model depending on it's capabilities. |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA