Beha-Amprobe PRM-5 EUR Phase Rotation Tester
- Range 100-700V (16-400Hz)
- LED Indication
- 3 Phase Indication
- Indication Of Phase Rotation
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Beha-Amprobe PRM-5 EUR Phase Rotation Tester
If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering. Not requiring a battery to operate, the PRM-5-EUR is a simple and reliable tester to check for proper phase sequence in 3-phase cables and receptacles.
Along with the PRM-5-EUR functionality, the PRM-6-EUR has a clear, backlit LCD display and can test motor rotation of disconnected motors, using test leads. An advanced feature of the PRM-6 is non-contact motor rotation detection, which senses motor rotation direction without test leads. This is particularly useful for fast-running motors when the motor rotation cannot be visually determined or when the drive shaft is not visible.
Durably constructed with a rubber out casing the PRM-5-EUR is CAT IV 600 V rated, and conforms to EN61010 and EN 61557 standards, making this tool essential for phase rotation testing in commercial and industrial environment on electrical systems up to 700 V.
Beha-Amprobe PRM-5 Comes Supplied With:
- 3 Test Leads (Non detachable)
- 3 Test probes
- 1 Alligator clip
- User Manual
- Carry Bag
Functions:
- Phase sequence test to validate correct connections and identifies faulty 3-phase wiring with de-energized phases or
incorrectly wired receptacles (PRM-5-EUR and PRM-6-EUR)
- Motor rotation test to check the correct rotation of motors prior to connection by attaching leads to motor wires,
and rotating shaft by hand or other means (PRM-6-EUR). - Non-contact motor rotation test to determine the rotation of running motors by placing meter on the motor casing (PRM-6-EUR)
- Easily and accurately test CEE 16 A and CEE 32A sockets with optional 1324 Accessory Set Unidreh
Product Information:
• Fast detection of phase sequence in three-phase supply
• Voltage range from 100 to 700 V
• Frequency range 16 to 400 Hz
Product Highlights:
• No battery needed
• Robust housing with rubber protective cover
• Securely connected test leads
• Measurement category CAT IV, 600 V
Spares & Accessories (Not Supplied):
- 1324 Accessory Set For quick and easy connection to CEE 16A and 32A sockets
| Key Features | Range 100-700V (16-400Hz), LED Indication, 3 Phase Indication, Indication Of Phase Rotation | |||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||
| Manufacturer | Amprobe | |||||||||||||||||||||||||||||||||||||
| Short Description |
Updated January 2024
Please note, our cut-off time is 2:00pmOrders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery. Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order. *UK Mainland (Revised March 2021)
Delivery SurchargesBecause of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
Offshore ServicesAll offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles. International deliveryInternational delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk ExportAll export inquiries should be directed to the export division before placement of order. If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
| |||||||||||||||||||||||||||||||||||||
