Beha-Amprobe 2100 Beta 2 Pole Tester
- Multibuy Deal Available
- LCD Display
- GS38 Compliant
- Phase Rotation Tester
- LED Indicator
- Tests Up To 690v
- GS38 Compliant
- LCD Display
- LED Indication
- Phase Rotation Testing
- Tests up to 690v
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Beha-Amprobe 2100 Alpha 2 Pole Tester
The Beha-Amprobe 2100-Alpha and 2100-Beta are rugged, easy-touse two pole voltage testers for voltage and continuity checks. Built tough for use in industrial and commercial environments, the 2100 Series measures voltage range up to 690 V AC/DC and is safety rated to CAT IV 600 V / CAT III 690 V. They are also built according to latest voltage tester standard EN 61243-3:2010 and are GS approved.
Both offer voltage test by LED, phase rotation test, switchable load by two push buttons, single pole phase test and continuity. The 2100 series also offers a torch function for working in dark environments and has an ingress protection rating of IP 64. The voltage tester 2100-Beta offers dual display for voltage test with an LED and LCD display.
- Switchable load of 140 W with two push buttons
- Voltage Test
- Display by LEDs 12…690 V AC/DC
- Display by LCD 12…690 V AC/DC
(2100-Beta only)
• Continuity test with visual (LED) and radio indication
• GS approved, built according to EN 61234-3:2010
• Robust, double isolated cable with wear indication
• 4 mm probe extensions for easy, ergonomic measurement in sockets
• Automatic AC/DC voltage detection, indication of polarity
• Audible indication when detected voltages above50 V AC and 120 V DC
• Two pole phase rotation indication
• Test of 30 mA RCD by push buttons
• Single pole test for phase polarity
• Work light for dark environment
• IP 64 splash and dust proof
• Protective probe caps for reducing the risk of injury
• Quick single hand test on mains socket with 19mm contact distance
• Safety rated CAT IV 600 V, CAT III 690 V
ISSWWW and Beha-Amprobe - A Fluke Company
With a combined experience of over 100 years, well-known German brand Beha and US-based Amprobe have a track record to be proud of. Now we have joined forces, and together we are committed to making your job safer, faster and easier than ever. Our expertise is legendary. Almost 70 years ago in 1948, we invented the very first clamp meter, and we haven’t stopped innovating since.
The Amprobe brand has always remained a staple among our stockholding. It's pedigree and price point make the brand a quality offering that rival higher priced brands for comparable technology. You can trust Amprobe, thousands do. From multimeters to voltage detectors, at Beha-Amprobe we constantly improve our designs to provide you with the very best quality tools and support.
| Key Features | Multibuy Deal Available, LCD Display, GS38 Compliant, Phase Rotation Tester, LED Indicator, Tests Up To 690v |
|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) |
| Manufacturer | Amprobe |
| Short Description | Voltage test - (AC/DC) 12, 24, 50, 120, 230, 400, 690 V |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA