Metrel A1507 3-Phase Active Switch
- Automate 3 Ph Electrical Testing
- Bluetooth Communication
- Comprehensive Accessories Package
- For Use With Metrel MI 3152
- For Use With Metrel MI 3155
- Banana socket outputs
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
A 1507 3-Phase Active Switch
Electrical safety testing of more complex electrical installations and circuits can be a daunting task, especially when dealing with 3-phase ones, which often require cumbersome and time-consuming testing and measuring procedures. Until now.
We have developed the A 1507 3-Phase Active Switch, a type of adapter for our multifunctional electrical installation safety testers, which offers unprecedented speed and simplified electrical safety testing of 3-phase electrical systems. It can be used in conjunction with our latest tester MI 3155 EurotestXD or MI 3152 EurotestXC (MI 3152H EurotestXC 2.5 kV), all of which have dedicated AutoSequence®s that speed up measurements even more.
In short, if you own a Metrel MI 3155 or MI 3152 and are embarking upon 3 phase electrical testing, then this piece of equipment is set to make your job a whole lot easier.
The A 1507 3-Phase Active Switch is an accessory intended for automating the process of electrical safety testing of three phase circuits. In combination with Auto Sequence®s and one of Metrel’s electrical installation safety testers MI 3155 EurotestXD or MI 3152 EurotestXC it is possible to automate the process of 3-phase system testing even further.
*Calibration Options:
This instrument comes complete with a manufacturers calibration certificate. Please be aware that these certificates are generic and may also be time lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.
A 1507 Standard Set Comes Supplied With:
- A 1507 3-Phase Active Switch
- Power supply adapter + 3 NiMH rechargable batteries, type AA
- Test lead, black, (3 pcs), green, blue, 1,5 m
- Test tip, black (3 pcs), green, blu
- Crocodile clip, black (3 pcs), green, blue
- Small soft carrying bag
- Instruction manual
- Calibration certificate
Key features:
- Banana socket outputs for connection to a 3-phase system;
- Motor driven through Bluetooth communication with Metrel’s electrical safety testers;
- Automatic ON/OFF.
Application:
On-site automated testing of:- 3-phase systems via the added crocodile clips and probes;
- 3-phase sockets with the use of additional adapters.
Supported Instruments:
- MI 3152 EurotestXC
- MI 3152H EurotestXC 2.5kV
- MI 3155 EurotestXD
Supported measurements:
- Voltage and 3-phase sequence
- Insulation resistances
- Continuity of protective conductor
- Resistance to earth
- Resistance N-PE
- RCD testing
- Loop / Line impedances
Optional Accessories (Not Included):
A 1642 Adapter CEE 5-P 32A (male) / Schuko plug
3-phase adapter for testing 3-phase sockets type 32 A CEE with support of the A 1507 3-Phase Active Switch.
A 1641 Adapter CEE 5-P 16A (male) / Schuko plug 3-phase adapter for testing 3-phase
3-phase adapter for testing 3-phase sockets type 16 A CEE with support of the A 1507 3-Phase Active Switch.
About Metrel
Metrel was established in 1957 as a factory for the production of electrical measuring instruments and components for the domestic market and grew from there to become one of world’s leading manufacturers of measuring and testing equipment.
We are one of the few companies in our industry that develops and manufactures products at a single location, starting with design and eding with final assembly, quality control and calibration.
An important component of our philosophy is also taking into account customer’s needs and desires and using that when designing new products and upgrading older ones. Special emphasis is given on language support and compliance with local standards for each specific market.
We are dedicated to giving our customers, technicians, engineers, safety inspectors and device manufacturers the best tools for the job and take pride in being at the cutting edge of measuring and testing technology. Advanced, dependable, rugged and accurate are just some of the terms used in conjunction with our products, which are sold through our network of distributors and trusted partners, spanning six continents and more than 70 countries.
| Key Features | Automate 3 Ph Electrical Testing, Bluetooth Communication, Comprehensive Accessories Package, For Use With Metrel MI 3152, For Use With Metrel MI 3155, Banana socket outputs | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||
| Manufacturer | Metrel | ||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA