Di-Log DL9118 17th Edition Multifunction Tester Kit Contents

The images provided are for illustrative purposes only. Please refer to product description.

Dilog DL9118 18th Edition Multifunction Tester

FREE Gift The all new Dilog DL9118 17th Edition Multifunction Tester. It's RCD-LOC XLT feature allowins loop testing without tripping any type of RCD/RCBO with very high accuracy.

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£474.00 excluding VAT £568.80 including VAT @ 20% Regular Price: £1,378.80

Manufacturer Certificate Included
Phase Rotation Service
Earth Testing
Auto RCD
Backlit LCD Display
Non Trip Loop Testing
Memory Function

Add Certificate Of Calibration?

Please Choose Your Free Gift

Required Fields

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery

This instrument comes complete with your choice of free gift from the drop-down menu above. Choose from a calibration voucher for next
year or a 50m R2 wander lead. How about any one of the IET Guidance Notes, or a quality two-pole tester?
Whatever you choose you can be sure you're getting a fantastic deal at Instrument Sales & Service.

DiLog DL9118 17th Edition Multifunction Tester

Test continuity, voltage, insulation, high and low current loop impedance, phase rotation, PFC loop tests, RCD trip time and current tests and loop impedance all in one unit.

The ALL NEW Di-Log DL9118 multifunction tester has been designed to fully comply with the testing requirements of the 17th Edition. It also incorporates many of the features that we have come to expect with modern MFTs. It is designed to be worn around the neck with a comfortable harness, for easy function selecting and testing.

The All NEW RCD-LOC XLT feature allows loop testing without tripping any type of RCD or RCBO with very high accuracy. The DL9118 is also packed full of features, such as a Remote Test Probe, Auto Start Loop & Continuity, colour changing LCD display indicating error, and comes complete with a toolbox style carry case. All in all, the DL9118 offers incredible value for a feature packed MFT meeting all the safety and performance requirements of BS EN 61557.

*Important Calibration Information:

This instrument comes complete with the manufacturers dated calibration certificate. Please be aware that these certificates are generic and may also be time lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Di-Log DL9118 Comes Supplied With:

Rugged Carry Case
Manufacturers Certificate
Remote Probe
Set of Shielded Test leads with Crocodile Clips
Shielded AC Power Cord

Key Features:

Loop Impedance – Unique auto start RCD-LOC XLT loop test principle will not trip any RCD
Prospective short circuit current – with auto start and direct readout of PSCC
High Current Loop Test – auto start loop test with high current Ze measurement
Phase Rotation Test – will indicate the correct phase sequence
Continuity test – with auto start & null facility to zero out lead resistance
RCD testing – Trip time, trip current, auto test and ramp current
RCD auto test – test RCDs in auto mode and simply recall the test results once finished
Insulation measurement – with 250, 500 & 1000V test voltages
Integrated socket polarity test
Fully protected against damage when accidentally connected across phases

About Di-Log

Di-Log Test Equipment offers a comprehensive range of test equipment from a voltage indicator to 18th Edition and Thermal Imaging to portable appliance testing kits. All Di-Log instruments are designed and manufactured to the highest quality specification and you can be assured that all manufacturing processes adhere to internationally recognised standards. Di-Log instruments are accurate, safe and rugged – you won’t find a better balance between cost and fitness for purpose.

DiLog DL9118 17th Edition Multifunction Tester
Voltage
Range	0 to 440V
Accuracy	±5% ±2 digits from 0 to 100Hz
Resolution	1V
Continuity
Range	0.01 to 200Ω
Accuracy	±2% ±5 digits
Resolution	0.01 to 1.99Ω 2.0 to 19.9Ω 20 to 200Ω
Test Voltage	>4V DC >25V DC Open circuit
Compliance	IEC61557-4 and IEC61557-10
Insulation
Range	0.05MΩ to 200MΩ
Accuracy	±5% ±5 digits
Resolution	0.01MΩ to 1.99MΩ 2.0MΩ to 19.9MΩ 20MΩ to 200MΩ
Test Voltage	250, 500 and 1000V
Test Current	1mA
Compliance	IEC61557-2 and IEC61557-10
No Trip Loop Impedance
Range	0.01Ω to 2000Ω
Typical Accuracy	±5% ± 12 digits (to 1.99Ω) ±5 digits (to 2000Ω)
Resolution	0.01 to 1.99Ω 2.0Ω to 19.9Ω 20Ω to 2000Ω
Test Current	<15mA RMS
High Current Loop Impedance
Range	0.01Ω to 2000Ω
Typical Accuracy	±5% ± 5 digits
Resolution	0.01Ω to 1.99Ω 2.0Ω to 19.9Ω 20Ω to 2000Ω
Test Current	3.5A Peak
Loop Test PFC Measurements
Range	1A to 26Ka
Accuracy	±5% ±5 digits
Range	1A to 999A 1kA to 26kA
High Current Loop Impedance
Range	0.01 to 2000Ω
Typical Accuracy	±5% ±5 digits
Resolution	0.01Ω to 1.99Ω 2.0Ω to 19.9Ω 20Ω to 2000Ω
Test Voltage	Phase to neutral 190V to 260V Phase to phase 328V to 440V
Test Current	3.5A peak
Line Test PSC Measurements
Range	1A to 26kA
Accuracy	±5% ±5 digits
Range	1A to 999A 1kA to 26kA
RCD Trip Time Tests
Range	0ms to 2000ms
Accuracy	±5% ±2 digits
Range	0 to 2000ms 1/2 1x 0 to 300ms 1x general (500ms selective) 0 to 40ms 5x
Test Current	10mA/30mA/100mA (1/2, 1x, 5x current) 300mA/500mA (1/2, 1x current)
Compliance	IEC61557-6 and IEC61557-10
RCD Trip Current Tests

Range	0.5I∆n to 1.1I∆n
Accuracy	±5% of expected current
Step Size	0.1I∆n
Step Duration	300ms
Compliance	IEC61557-6 and 61557-10

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

UK Mainland

Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B

Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.

Next Day Before 10:30 (Excluding Saturday & Sunday) Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Next Day Before 12:00 Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Saturday Before 10:30 Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Saturday Before 12:00 Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Saturday Anytime >6:00pm Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Sunday Before 12:00 Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Sunday Anytime up to 6:00pm Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International Delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA