Chauvin Arnoux Power Logger PEL113-C (with clamps and adapter) P01300003

Comes Supplied With:

• 1 carrying bag
• 3x MA194-350 MiniFlex Sensors
• Power adapter
• 4 voltage cables
• 4 crocodile clips
• 1 set of inserts/ rings
• 1 SD card
• 1 SD Card-USB adapter
• 1 USB cable
• PEL TRANSFER PC software & User’s Manual downloadable from our website
• 1 Quick Start Guide

ENERGY AUDITS 

• Voluntary (ISO 50001, etc.) or mandatory operation aiming to reduce energy consumption: buildings, housing, infrastructure, equipment, etc.
• Implementation of measurement campaigns focused on energy for comprehensive diagnosis of the electrical installation
• Identification of the causes of overconsumption by the equipment or overbilling

PREVENTIVE AND PREDICTIVE MAINTENANCE

• Industrial equipment monitoring 
• Analysis of consumption due to the Air-conditioning, Ventilation and Heating systems
• Sizing of a power factor correction cabinet
• Redistribution of the loads on the electrical grid
• + Motor diagnostics: measurement of a motor’s speeds, efficiency and torque without using mechanical sensors

Measurements and Functions:

VOLTAGE

• RMS and DC measurements with 128 samples/cycle simultaneously on each phase
• AC and/or DC voltage measurements up to 1,000 V
• Current up to 10 kA AC, 5 kA DC (depending on the current sensor).
• Active, reactive (N,D,Qf) and apparent power values
• Active energy values
• Fundamental active power values (Pf), balanced active power values (P+) and unbalance active power (Punb)
• Motor measurements and characterisation

POWER/POWER FACTOR

• Self-powered via the phase
• Extensive measurement range by using voltage and current ratios
• Breakdown of energy losses
• The phase data: cos φ, tan Φ, power factor (PF)
• Crest factor z THD calculation for currents and voltages
• DC, 50 Hz, 60 Hz and 400 Hz measurements (Naval, etc.)
• Recording of the measurements and calculation results on the SD card 
• Automatic recognition of the type of sensor connected

PEL Transfer software

This application software can be used to set up the PEL 110s and process the energies. A mathematical algorithm applied to the power measurement campaigns automatically provides a breakdown of all the energy values, highlighting any losses detected. Users have everything they need to rank the priorities of their operations. Energy consumption reports can be generated very simply.

With PEL Transfer, you obtain the value of your electricity consumption in the local currency (€, £, $, etc. - 8 tariff ranges).

MiniFlex® MA194 250 mm Current Clamps

Network Communication:

The PELs are equipped with a wide range of wired and wireless communication possibilities. The free PEL Transfer software interface allows you to monitor the data on a PC in real time.

Ethernet

When possible, the PELs can be connected together via an Ethernet-type wired link. The PEL Transfer software then takes control of all the instruments connected. The Ethernet link can be used at the same time as Wifi connections.

WiFi

The PELs offer 2 Wifi operating modes. They can be connected to the company’s IT network via a server. They can also be addressed directly by a PC or smartphone.

IRD DataView® Synch

A secure server is provided so that you can view your data from anywhere in the world.

USB

USB connections can be used to configure or download the data, as well as to take control of an instrument whatever the circumstances.

Choose your model:

Technical Specification: