TPI 9085 Smart Vibration, Bearing Condition and Temperature Analyser
• Size: H 7.95” W 2.36”
• Weight: 9.8oz (280g)
• Environmental:
o Water: IP67 Waterproof
o Operating: 32°F to 122°F (0°C to 50°C)
o Storage: -4°F to 158°F (-20°C to 70°C)
• Power supply: Lithium-ion wireless charging
• Battery life between charges: 1,500 measurements or
approximately 50 hours of normal use
• Frequency ranges: ISO: 2/10Hz - 1kHz
g: 10Hz - 10kHz
BDU: 1kHz - 10kHz
• Accuracy: +/-5%
• Frequency resolution: 800 lines
• Displayed amplitude units: Acceleration in g / velocity in
inches per second or mm per second / Bearing damage in BDU
• Displayed frequency units: Hz, CPM or RPM
• Displayed displacement: Peak or peak to peak
• Input range: +/- 50 g
• Dynamic range: 96 dB
• Auto set up of VA bands
• Displayed temperature range: -60°F to 300°F (-50°C to 150°C)
• Accuracy: (+/- 4°F) (+/- 2°C)
• Accelerometer connection: 5 pin MIL connector cable with
magnet and temperature sensor
• Communication: Bluetooth or USB docking station and cable
to PC; data integration using software C-Trend II
• Standard accessories: A9101 Low power accelerometer with
A9105 cable, temp sensor and magnet, A9081A docking station
with USB cable, Standard software and carrying case and A9086
Protective boot with magnets.
Description
TPI Smart 9085 Vibration, Bearing Condition and Temperature Analyser
Smart Trend Analyser
Analyses, Interprets and TRENDS Machine Condition, including bearing wear & temperature, with Wireless charging.
Comes Supplied With:
- Soft Carry Case with space for 9085
- Charger and cord
- Accelerometer Cable & Accelerometer
- Docking cradle
- USB Cable
Benefits:
• Find machine faults before they stop your machine
• Increase productivity and lower maintenance costs
• Measure temperature to determine if a bearing requires lubrication, preventing wear and failure.
• Use temperature measurement to confirm a high BDU reading (bearing noise) is caused by a worn bearing and not noise from pump cavitation, gearbox noise, or a nearby noisy bearing.
• Temperature measurement aids in diagnosing a tight or loose housing or shaft fit on a bearing.
• Measuring temperature assists with potential electrical issues on motors such as winding insulation deterioration, single phasing, broken rotor bars etc.
Key Features:
• Collect vibration and temperature data
• Practically instantaneous readout of actual surface temperature
• Trend data using C-Trend II PC software
• Standard Cable mounted accelerometer with built-in magnet and temperature sensor
• USB docking station to download to a PC
• ISO built-in Alarms
• Easily identify bearing problems with BDU (Bearing Damage Unit) Reading
• Easily identify problems with built-in band filters:
1X (unbalance)
2X (misalignment)
3X (looseness)
• 800 line FFT (spectrum)
• Wireless charging
• Ruggedized IP67 case
• 3-year Limited Warranty
About TPI Europe
Since 1997, TPI has been striving to offer the latest technology at the most affordable price to technicians, contractors, engineers and others seeking value based test and measurement instruments. Our mission is to become the leading independent manufacturer and supplier of low cost high performance industrial instrumentation.
Headquartered in the heart of the “Silicon Forest” in Beaverton, Oregon, TPI combines innovation, performance, customer service and high-value in products which include: Vibration, Combustion, Pressure (manometers), Temperature, Combustible gas, Digital Multimeters, Clamp Meters, IAQ, specialty test and measurement instruments, and a wide range of accessories.
Features & Specification
| Product Stock Status | Next Day Delivery (subject to availability) |
|---|---|
| Manufacturer | TPI Test Products International |
| Short Description | • Size: H 7.95” W 2.36” |
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA